Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G450-4AAY-10 EC Backward Curved Centrifugal Fan 630mm 380V 9550 m3/h

FB3G450-4AAY-10

Nominal Voltage VAC 380
Current draw A 2.1±10%
Speed(RPM) min-1  1700±5%
Power consumption W 1200±10%
Max. Air Flow CFM / m3 /H 5620.2/9550
Max. Static Pressure In.wg /Pa 3.35/838

10pcs

Brand:
FANOVA
Spu:
FB3G450-4AAY-10
  • Overview
  • Recommended Products
Brief Description

Move serious air through serious resistance with the FB3G450-4AAY-10, a 630 mm backward curved centrifugal fan that pairs a 9550 m3/h maximum volume flow with a 838 Pa peak static pressure. This is the frame size and blade geometry that lets a single ducted fan replace two or three smaller units, cutting installation time, wiring, and maintenance touch points across a large air handling assembly. The impeller and endcap are both cast from die-cast aluminum, so the rotating mass stays rigid and dimensionally stable when the wheel is pushed to 1700 RPM. A BLDCEC137 electronically commutated motor rated 1200 W at 380VAC (operating range from 304V) draws 2.1 A and holds speed without the slip losses of an induction drive. Speed is commanded over the EC control interface, giving stepless modulation from a building management signal rather than fixed tap settings. The motor carries Class F insulation with thermal protection and an IP54-rated enclosure, suitable for dusty plant rooms and rooftop cabinets. Dual ball bearings rated for 40,000 hours at 40 degrees C keep the fan in service through years of continuous duty. At 80.6 dB(A) it is intended for mechanical rooms and industrial enclosures, not occupied spaces. Typical applications include commercial air handling units, cleanroom recirculation, data center cooling, fume extraction and process ventilation. The fan is CE and RoHS compliant and backed by FANOVA's Suzhou manufacturing and OEM/ODM support.

Product Specification

The FB3G450-4AAY-10 is built around a 630 mm diameter backward curved impeller die-cast in aluminum alloy in a single pour, which gives uniform blade thickness, balanced wall sections and a hub that stays true at high tip speed. The backward curved blade profile is self-cleaning in the aerodynamic sense: the blade passages are wide enough to pass light particulate without build-up, and the non-overloading power curve means the 1200 W motor cannot be overloaded by a duct system that runs tighter than design. At 1700 RPM the wheel delivers 9550 m3/h free air and holds 838 Pa at shutoff, a pressure capability that supports long return runs, dense filter banks and multi-outlet distribution without staging a second fan. The rotor measures 138 mm in diameter and is bonded and dynamically balanced to ISO 1940 G6.3, keeping vibration low and bearing loads even. The motor is a BLDCEC137 outer-rotor electronically commutated design with integrated commutation electronics, permanent magnet rotor and three-phase stator. It runs on 380VAC nominal with a working range starting at 304V, drawing 2.1 A and delivering 1200 W, and it maintains commanded speed as line voltage and system resistance vary, which is the practical advantage over a belt-driven AC alternative. Speed control is through the EC interface, accepting a 0-10 VDC or PWM command and returning a tachometer output for verification, so the fan can be trimmed to actual duct pressure rather than balanced by damper. Electrical protection includes soft start, locked rotor and over-temperature sensing, and the winding is Class F insulated. The endcap and housing are also die-cast aluminum, forming a rigid, corrosion-resistant structure that carries the motor and mounts the inlet ring. The fan is supplied with an 18AWG cable, 334 mm in length, for connection to the control panel. Bearings are sealed dual ball races on both shaft ends, rated 40,000 hours at 40 degrees C ambient and lubricated for life. The assembled unit is CE and RoHS compliant and is produced under FANOVA's Suzhou quality system with routine balance and hipot checks on every unit.

Nominal Date
AC Backward Curved Centrifugal Fan image.png
Type FB3G450-4AAY-10
Model BLDCEC137

 

Nominal Voltage VAC 380
Voltage range VAC 304
Current draw A 2.1±10%
Speed(RPM) min-1  1700±5%
Power consumption W 1200±10%
Sound Pressure Level dB(A) 80.6±5%
Max. Air Flow CFM / m3 /H 5620.2/9550
Max. Static Pressure In.wg /Pa 3.35/838
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G450-4AAY-10 delivers 9550 m3/h at 838 Pa while drawing only 1200W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 630mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 630mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000