Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G310-2AAL-90 EC Backward Curved Centrifugal Fan 310mm 230V 2212 m3/h

FB3G310-2AAL-90

Nominal Voltage VAC 230
Current draw A 1.4±10%
Speed(RPM) min-1  2050±5%
Power consumption W 180±10%
Max. Air Flow CFM / m3 /H 1301.7/2211.9
Max. Static Pressure In.wg /Pa 2.17/543

50pcs

Brand:
FANOVA
Spu:
FB3G310-2AAL-90
  • Overview
  • Recommended Products
Brief Description

When a single 310 mm backward-curved centrifugal fan can deliver 2211.9 m3/h (1301.7 CFM) at free air while holding 543 Pa (2.17 in.wg) at shutoff, the economics of multi-fan arrays change overnight. The FB3G310-2AAL-90 is FANOVA's high-volume answer for 230VAC EC replacement projects: one compact impeller replaces two or three smaller AC fans, cutting cabinet cutouts, wiring harnesses and maintenance points. Its die-cast aluminum impeller and matching aluminum endcap shrug off the heat that builds up in densely packed air handlers, while the BLDCEC92 electronically commutated motor holds 2050 RPM at 180 W with an efficiency curve that stays flat across the 184-277VAC range. Installers appreciate the 230VAC EC plug-and-play interface: the same 20AWG, 139 mm cable set accepts 0-10VDC or PWM speed commands, so a drop-in swap needs no transformer and no external VFD. Electrical protection is built in, with insulation systems rated for demanding continuous duty and locked-rotor, over-temperature and over-current safeguards. Dual ball bearings selected for long L10 life keep service intervals long even in 24/7 ventilation duty. Typical applications include commercial AHU return-air sections, rooftop condensers, telecom thermal management, energy-storage cabinet cooling and industrial exhaust where high airflow meets moderate static resistance. The fan carries CE and RoHS marks and is manufactured under FANOVA's ISO 9001 quality system. For engineers who size by airflow first and pressure second, the FB3G310-2AAL-90 is the consolidation point.

Product Specification

The FB3G310-2AAL-90 is built around a 310 mm diameter backward-curved impeller die-cast in aluminum alloy, a construction chosen for stiffness at 2050 RPM and for dimensional stability when the airstream runs warm. Nine aerodynamically profiled blades are spaced to suppress tonal noise while maintaining a broad operating band; the backward-curved geometry gives the fan a non-overloading power characteristic, so duct resistance can rise without pushing the BLDCEC92 motor past its 180 W rating. The impeller is dynamically balanced after casting, and the complete rotor assembly is trimmed to reduce vibration at the 2050 RPM design point, which is reflected in the 67.7 dB(A) sound pressure level. The endcap and housing are also die-cast aluminum, providing a rigid motor mount that keeps tip clearance uniform and helps dissipate motor heat. Inside, the BLDCEC92 motor uses a permanent-magnet rotor and an integrated EC drive that converts the 184-277VAC input directly, eliminating the separate transformer or variable-frequency drive that an equivalent AC fan would require. Control is through a 0-10VDC analog input or a PWM signal, with tach output available for monitoring; speed can be set anywhere between minimum and maximum, and the drive soft-starts to limit inrush. Electrical ratings are 230VAC nominal, 1.4 A, 180 W, with power factor correction and harmonic control suitable for commercial installations. The 20AWG, 139 mm cable set carries power and control conductors in a single lead, simplifying harness design. Protection features include locked-rotor shutdown, over-current limiting, over-temperature foldback and reverse-polarity protection on the control input; the insulation system is rated for continuous operation at elevated ambient. Bearings are pre-lubricated dual ball bearings with a calculated L10 life suitable for 24/7 HVAC duty, and the motor shaft runs in a balanced assembly that limits axial and radial play. The fan is RoHS compliant and carries CE marking, and production follows FANOVA's ISO 9001 quality system with routine hipot, insulation-resistance and performance testing on every unit. With a maximum airflow of 2211.9 m3/h (1301.7 CFM) and maximum static pressure of 543 Pa (2.17 in.wg), the model suits air-handling units, condenser and evaporator sections, telecom cabinets, battery energy-storage racks and general industrial ventilation where a single large impeller can replace multiple smaller fans and reduce total system cost.

Nominal Date
AC Backward Curved Centrifugal Fan image.png
Type FB3G310-2AAL-90
Model BLDCEC92

 

Nominal Voltage VAC 230
Voltage range VAC 184~277
Current draw A 1.4±10%
Speed(RPM) min-1  2050±5%
Power consumption W 180±10%
Sound Pressure Level dB(A) 67.7±5%
Max. Air Flow CFM / m3 /H 1301.7/2211.9
Max. Static Pressure In.wg /Pa 2.17/543
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G310-2AAL-90 delivers 2211.9 m3/h at 543 Pa while drawing only 180W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 310mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 310mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000