EN
FB3G133-1APL-70
| Nominal Voltage | VAC | 115 |
| Current draw | A | 0.7 |
| Speed(RPM) | min-1 | 4450 |
| Power consumption | W | 48 |
| Max. Air Flow | CFM / m3 /H | 275/467 |
| Max. Static Pressure | In.wg /Pa | 1.65/413 |
50pcs
The FB3G133-1APL-70 is a 115VAC single-phase EC backward curved centrifugal fan purpose-built for North American and Japanese power grids. Its BLEC72 motor delivers 467 m³/h (275 CFM) at 413 Pa while consuming only 48W at 4450 RPM—a direct drop-in upgrade from legacy 115VAC shaded-pole and PSC fans. The 133mm form factor fits compact air handlers, fan coil units, and electronics cooling racks. Dual-frequency 50/60 compatibility ensures consistent performance at both US 60Hz and Japanese 50Hz installations without transformer or voltage converter. 0-10VDC/PWM speed control with FG tach (3 pulse/rev) provides precision airflow regulation. CE, RoHS, ISO9001, ErP2026 certified with 50,000-hour L10 bearing life.
The FB3G133-1APL-70 features a BLEC72 permanent magnet brushless external rotor motor engineered for 115VAC single-phase mains operation at 50/60. At 4450 RPM, the motor draws just 0.7A to produce 48W of shaft power, driving the 7-blade glass-fiber reinforced PP impeller to generate 467 m³/h at 413 Pa. The wide 92~138 VAC input handles real-world grid fluctuations from both 60Hz (US/Canada) and 50Hz (Japan) supplies. The die-cast aluminum housing provides IP44 protection. Ball bearings support any-angle mounting with 50,000+ hour L10 service life at 40°C. Protection suite: soft-start, current limitation, under/over voltage, thermal overload, locked-rotor, reverse polarity. FG tach (3 pulse/rev). CE, RoHS, ISO9001, ErP2026 and EN ISO 12100, EN 60204-1, EMC compliant.
| EC Backward Centrifugal Fan |  |
|
| Type | FB3G133-1APL-70 | |
| Model | BLEC72 | |
| Phase | ~ | 1~ |
| Nominal Voltage | VAC | 115 |
| Frequency | Hz | 50/60 |
| Voltage range | VAC | 92~138 |
| Current draw | A | 0.7 |
| Speed(RPM) | min-1 | 4450 |
| Power consumption | W | 48 |
| Sound Pressure Level | dB(A) | 67.8 |
| Max. Air Flow | CFM / m3 /H | 275/467 |
| Max. Static Pressure | In.wg /Pa | 1.65/413 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |
Remarks:
I. Standard cable length. Customizable.
II. 0-10V/PWM control. Modbus RTU RS485 optional.
Test condition:
I. Specified environment and installation mode.
II. Input Voltage---Operating voltage.
III. Temperature---Room 25°C.
IV. Humidity---65%RH.
I. When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
II. Do not plug or unplug the fan lead plug when the fan is running
III. If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
IV. Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
V. The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
VI. If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
VII. As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. US/Japan Grid Ready: Operating on standard 115VAC 50/60, the FB3G133-1APL-70 connects directly to North American and Japanese mains without transformers or voltage converters. The wide 92~138 VAC input handles real-world grid fluctuations. Same wiring, same voltage as legacy AC fans—drop-in upgrade with 40-60% energy savings.
2. Dual-Frequency Reliability: Engineered for both 50Hz and 60Hz operation with consistent 467 m³/h at 413 Pa performance. Critical for equipment exported between US (60Hz) and Japanese (50Hz) markets, and for facilities with mixed-frequency power distribution.
3. EC Efficiency, AC Simplicity: At 48W, the FB3G133-1APL-70 replaces legacy 115VAC shaded-pole and PSC fans consuming 80-120W. Same AC input, dramatically lower operating cost. The 0.7A current draw at 115VAC is well within standard 15A branch circuit limits.
4. Comprehensive Protection: Soft-start, current limitation, under/over voltage detection, thermal overload, locked-rotor, reverse polarity protection. FG tach (3 pulse/rev) for RPM monitoring. 0-10VDC/PWM speed control from 0-4450 RPM.
5. Certified & Flexible: CE, RoHS, ISO9001, ErP2026 with EN ISO 12100, EN 60204-1, EMC. Die-cast aluminum, IP44, ball bearings 50,000+ hr L10. OEM/ODM with custom voltage, connectors, cables. 7-day samples, 14-21 day production.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2:Will you provide samples?
A2: Sample is available and can be delivered within 7 days for standard models
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI, pay deposit, then we will arrange the production. After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.
