Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G450-2AAL-20 EC Backward Curved Centrifugal Fan 450mm 230V 6110 m3/h

FB3G450-2AAL-20

Nominal Voltage VAC 230
Current draw A 2.1±10%
Speed(RPM) min-1  1300±5%
Power consumption W 500±10%
Max. Air Flow CFM / m3 /H 3595.74/6110
Max. Static Pressure In.wg /Pa 1.82/455

10pcs

Brand:
FANOVA
Spu:
FB3G450-2AAL-20
  • Overview
  • Recommended Products
Brief Description

When your air-handling design calls for one impeller to do the work of two, the FB3G450-2AAL-20 backward-curved centrifugal fan delivers 6110 m3/h at free air with a 450 mm die-cast aluminum impeller running at just 1300 RPM. That single-fan consolidation is the first superpower here: by covering the flow envelope of multiple smaller units, it removes the cost, wiring and maintenance burden of paralleled fans while cutting the total part count in the plenum. The second superpower is the 500 W BLDCEC102 electronically commutated motor on 230 VAC (184-270 V range, 2.1 A), which turns a plain AC supply into variable-speed performance without an external transformer or VFD. Control is through the integrated EC electronics: 0-10 VDC analog input, PWM or Modbus options let you trim speed to the exact duty point, and the motor reports status for building-management integration. Electrical protection and insulation meet Class F / Class B standards with an IP54-rated enclosure, and the precision ball-bearing set is rated for 40,000 hours at 40 C, keeping maintenance intervals long in continuous-duty service. With 455 Pa of static pressure available at maximum, the FB3G450-2AAL-20 handles medium-resistance duct runs, filter banks and heat-recovery coils in commercial HVAC, cleanroom recirculation, data-center cooling and process ventilation. CE and RoHS compliance, together with ISO 9001 manufacturing, backs every unit. With a sound level of 76 dB(A) at full speed, it is best specified with the speed reduced to the actual duty point, which also lowers power draw. Overall, the FB3G450-2AAL-20 is a direct AC-to-EC replacement that simplifies the cabinet, reduces wiring, and gives the designer one large, efficient impeller instead of a cluster of small ones.

Product Specification

The FB3G450-2AAL-20 is built around a 450 mm diameter backward-curved centrifugal impeller die-cast in aluminum alloy and balanced to ISO 1940 G6.3 before assembly. Its blade profile is optimized for high flow at moderate pressure: in free-air conditions it moves 3595.74 CFM (6110 m3/h), and it develops up to 1.82 In.wg (455 Pa) of static pressure. The impeller is mounted on the rotor of a BLDCEC102 outer-rotor electronically commutated motor, whose 102 mm rotor diameter sits inside the hub to keep the airflow path unobstructed. The motor is a three-phase permanent-magnet brushless design with integrated commutation electronics, operating from a 230 VAC nominal supply that tolerates 184-270 V and draws 2.1 A, for 500 W of input power at the 1300 RPM rated speed. Speed regulation is handled by the onboard EC controller, which accepts a 0-10 VDC analog setpoint, a PWM duty-cycle signal, or an optional Modbus RTU interface, so the fan can follow duct pressure, temperature or a scheduled setpoint without any external variable-frequency drive. Electrical connections are made through a 500 mm, 18AWG cable, with separate leads for power and control; the electronics are protected against overcurrent, overvoltage, locked rotor and overtemperature. Insulation is Class F on the winding with Class B rise at rated load, and the housing and endcap are die-cast aluminum for rigidity and heat dissipation. The shaft runs in preloaded ball bearings rated for 40,000 hours L10 life at 40 C ambient, and the motor is dynamically balanced as a complete rotating assembly to keep vibration low at all speeds. The fan is designed for -25 to +60 C ambient and mounts in any orientation. EMC performance meets EN 61800-3, and the unit carries CE and RoHS marks; production follows ISO 9001 quality management. Typical applications are commercial air handlers, cleanroom recirculation, data-center CRAC units, heat-recovery ventilation and industrial process cooling, where the 450 mm aluminum impeller provides high flow and stable pressure in a compact package.

Nominal Date
AC Backward Curved Centrifugal Fan image.png
Type FB3G450-2AAL-20
Model BLDCEC102

 

Nominal Voltage VAC 230
Voltage range VAC 184~270
Current draw A 2.1±10%
Speed(RPM) min-1  1300±5%
Power consumption W 500±10%
Sound Pressure Level dB(A) 76±5%
Max. Air Flow CFM / m3 /H 3595.74/6110
Max. Static Pressure In.wg /Pa 1.82/455
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G450-2AAL-20 delivers 6110 m3/h at 455 Pa while drawing only 500W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 450mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 450mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000