FB3G190-48PL-70
| Nominal Voltage | VDC | 48 |
| Current draw | A | 1.2±10% |
| Speed(RPM) | min-1 | 2950±5% |
| Power consumption | W | 57.6±10% |
| Max. Air Flow | CFM / m3 /H | 364.87/620 |
| Max. Static Pressure | In.wg /Pa | 1.97/492 |
50pcs
The FB3G190-48PL-70 is a 48VDC backward curved centrifugal fan purpose-built for telecom and data-center DC power architectures, where the -48VDC rail is a native, battery-backed standard rather than an afterthought. Running directly across a 36 to 57VDC window, it draws only 1.2 A and consumes a mere 57.6 W while delivering up to 364.87 CFM (620 m3/h) at 2950 RPM, proving that efficient air movement does not require a power-hungry blower. Its backward curved impeller, molded from glass-fiber reinforced propylene at 190 mm diameter, keeps rotating mass low so the BLDCDC72 brushless DC motor spins up smoothly and quietly, with a sound pressure level of 68 dB(A). Speed is commanded through a DC control interface, allowing the host system to trim airflow to actual thermal load and harvest further energy savings at part speed. The 72 mm rotor is housed in a die-cast aluminum endcap that doubles as a heat spreader and mechanical stiffener, while Class B insulation and integrated electronic protection guard the winding against overcurrent and locked-rotor events. A 20AWG, 500 mm lead set simplifies wiring to DCIM-monitored busbars and telecom rectifier shelves. Typical duties include cooling outdoor telecom cabinets, RRU base stations, solar charge controllers, energy storage racks and compact inverter enclosures where 48VDC is already present. The fan is RoHS compliant and built under ISO 9001 quality management, and FANOVA supports OEM and ODM programs with customized cable lengths and control curves for this platform.
The FB3G190-48PL-70 is assembled around a 190 mm diameter backward curved impeller injection-molded from glass-fiber reinforced propylene, a composite chosen because the fiber loading raises tensile and creep resistance far above unfilled plastic while keeping the wheel light enough for rapid acceleration. The blade count and curvature are tuned for a stable pressure-flow characteristic with a broad efficient operating band, so the fan can move 620 m3/h at free delivery or hold 492 Pa at shutoff without falling into stall instability. A die-cast aluminum endcap carries the rotor and motor stack, providing machined bearing seats, thermal conduction away from the windings and a rigid mounting plane that resists vibration in cabinet installations. The heart of the unit is the BLDCDC72 brushless DC motor with a 72 mm rotor, electronically commutated and rated for 48VDC nominal input over a 36 to 57VDC envelope, drawing 1.2 A and 57.6 W at 2950 RPM. Commutation is handled by integrated drive electronics that accept a DC voltage speed-control signal, giving the host thermal controller a simple analog command path without external inverters or transformers; the same electronics supervise current limiting, locked-rotor shutdown and automatic restart. Electrical termination is a 500 mm flying lead in 20AWG, sized for the 1.2 A running current with margin for inrush, and the lead can be ordered with connector options for rack and cabinet harnesses. Bearings are long-life ball types selected for horizontal and vertical shaft orientations, with grease and preload matched to continuous duty at 2950 RPM for an expected service life in the tens of thousands of hours at rated temperature. Insulation is Class B, and the winding is vacuum-treated to resist moisture in humid outdoor enclosures. The combination of low power draw, wide DC input tolerance and plastic impeller makes the fan attractive for solar-assisted and battery-backed installations where every watt of auxiliary load shortens runtime. Acoustic output is held to 68 dB(A), and the balanced impeller plus precision shaft fit keep tonal noise low for equipment mounted near working areas. Quality control includes dynamic balancing of every impeller, hipot and insulation-resistance testing of each motor, and a run-in period before packing; the product complies with RoHS and is manufactured in an ISO 9001 certified facility. FANOVA offers OEM/ODM engineering for customized speed curves, cable assemblies, mounting flanges and labeling, and provides dimensional drawings and airflow-pressure curves on request.
| DC Backward Curved Centrifugal Fan | ![]() |
|
| Type | FB3G190-48PL-70 | |
| Model | BLDCDC72 | |
| Nominal Voltage | VDC | 48 |
| Voltage range | VDC | 36~57 |
| Current draw | A | 1.2±10% |
| Speed(RPM) | min-1 | 2950±5% |
| Power consumption | W | 57.6±10% |
| Sound Pressure Level | dB(A) | 68±5% |
| Max. Air Flow | CFM / m3 /H | 364.87/620 |
| Max. Static Pressure | In.wg /Pa | 1.97/492 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FB3G190-48PL-70 delivers 620 m3/h at 492 Pa while drawing only 57.6W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 190mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 190mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.