FK3G133-48PL-70
| Nominal Voltage | VDC | 48 |
| Current draw | A | 0.6±10% |
| Speed(RPM) | min-1 | 3800±5% |
| Power consumption | W | 28±10% |
| Max. Air Flow | CFM / m3 /H | 235.4/400 |
| Max. Static Pressure | In.wg /Pa | 1.316/329 |
50pcs
When a 48VDC telecom cabinet needs a cooling fan that disappears acoustically, the FK3G133-48PL-70 plug fan is the answer: a 175mm glass-fiber reinforced polypropylene impeller spinning at 3800 RPM yet emitting only 63 dB(A) — quieter than a normal conversation and ideal for office-adjacent equipment rooms, laboratories and medical enclosures. Its second superpower is extreme electrical efficiency: the BLDCDC72 brushless DC motor draws just 0.6 A at 28 W while delivering up to 400 m3/h (235.4 CFM) and 329 Pa (1.316 In.wg) of static pressure, so a single fan can replace multiple smaller AC units and cut power distribution losses on -48VDC DCIM buses. The motor accepts a wide 36–57VDC input, riding through battery-discharge sags without stalling, and is controlled via a 0–10VDC/PWM interface for precise speed scheduling. Insulation is Class B with electronic locked-rotor and reverse-polarity protection, and the dual ball-bearing system is rated for 70,000 hours at 40°C, giving years of maintenance-free service in continuously energized cabinets. The die-cast aluminum endcap and housing damp vibration and shield the electronics, while the 20AWG, 103mm cable terminates in a standard 4-pin connector for fast field swap. Typical applications include telecom shelters, DC power distribution bays, inverter and rectifier cooling, laboratory fume-hood electronics, medical imaging cabinets and off-grid solar charge controllers. The fan carries CE and RoHS certification and is manufactured under FANOVA's ISO 9001 quality system, with UL-recognized components available on request. For engineers balancing acoustic comfort, DC-bus compatibility and long-life reliability, this 48VDC plug fan delivers a rare combination of silence, efficiency and compact 175mm form factor.
The FK3G133-48PL-70 is a backward-curved centrifugal plug fan built around a 175mm diameter impeller molded from glass-fiber reinforced polypropylene. The seven-blade rotor geometry is optimized through CFD for a steep pressure curve: it produces 329 Pa (1.316 In.wg) maximum static pressure and 400 m3/h (235.4 CFM) free-air flow while turning at 3800 RPM, a duty point that suits high-resistance filter paths and long duct runs in compact 1U-to-3U equipment. The impeller hub is dynamically balanced to ISO 1940 G6.3 before assembly, and the rotor diameter of 72mm matches the BLDCDC72 brushless DC motor, an electronically commutated design with integrated Hall sensors and a 6-pulse inverter stage. Speed is set through a 0–10VDC analog input or a 25kHz PWM signal, with tachometer output for DCIM and building-management integration; the control electronics accept 36–57VDC, nominal 48VDC, and draw 0.6 A at 28 W, giving the fan an efficiency class that keeps battery-backed telecom sites running longer during grid outages. Electrical protection includes soft-start current limiting, locked-rotor shutdown, reverse-polarity tolerance and transient suppression to EN 61000-4-5. The motor winding is Class B insulated (Class F magnet wire available), with a dielectric strength of 500VAC for one minute and insulation resistance above 100 megohms at 500VDC. Mechanical construction pairs the composite impeller with a die-cast aluminum endcap and housing that acts as a heat spreader and vibration damper; the rotor runs on two pre-lubricated ball bearings rated L10 at 70,000 hours and 40°C, allowing any-orientation mounting without oiling. A 20AWG, 103mm lead exits the housing through a strain-relieved grommet and terminates in a keyed connector for tool-free replacement. Acoustic output is 63 dB(A) at one meter, with a tonal spectrum tuned to avoid the 1–4kHz band that irritates office occupants — a benefit for laboratory, medical and workplace installations. The fan is CE marked, RoHS compliant and produced in an ISO 9001 facility; each unit undergoes hipot, balance and 100% run-in testing before packing, and UL-recognized insulation system options are available for North American projects.
| DC Plug Fan | ![]() |
|
| Type | FK3G133-48PL-70 | |
| Model | BLDCDC72 | |
| Nominal Voltage | VDC | 48 |
| Voltage range | VDC | 36~57 |
| Current draw | A | 0.6±10% |
| Speed(RPM) | min-1 | 3800±5% |
| Power consumption | W | 28±10% |
| Sound Pressure Level | dB(A) | 63±5% |
| Max. Air Flow | CFM / m3 /H | 235.4/400 |
| Max. Static Pressure | In.wg /Pa | 1.316/329 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FK3G133-48PL-70 delivers 400 m3/h at 329 Pa while drawing only 28W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 175mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 175mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.