Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G133-48PL-71 DC Backward Curved Centrifugal Fan 133mm 48V 495 m3/h

FB3G133-48PL-71

Nominal Voltage VDC 48
Current draw A 0.95±10%
Speed(RPM) min-1  4460±5%
Power consumption W 45.6±10%
Max. Air Flow CFM / m3 /H 291.3/495
Max. Static Pressure In.wg /Pa 1.87/468

50pcs

Brand:
FANOVA
Spu:
FB3G133-48PL-71
  • Overview
  • Recommended Products
Brief Description

When telecom cabinet architects need a compact air mover that speaks the native -48VDC language of the central office, the FB3G133-48PL-71 answers directly: a 133 mm backward-curved centrifugal fan that draws just 0.95 A at 48VDC and converts that modest current into 291.3 CFM (495 m3/h) of directed airflow and 1.87 in.wg (468 Pa) of static pressure. At 45.6 W it belongs to the sub-100 W class, so a single 48 V rectifier branch can feed several fans without re-engineering the DC distribution or DCIM monitoring thresholds. The impeller is molded from glass-fiber reinforced propylene, a lightweight composite that shrugs off humid cabinet air and keeps rotational inertia low, while the die-cast aluminum endcap anchors the 72 mm rotor and pulls heat away from the BLDCDC72 brushless DC motor. Speed is fixed at 4460 RPM for this variant, with the BLDCDC72 platform supporting PWM and tachometer feedback for cabinet-level thermal control. Insulation is Class B with a dielectric strength of 500 VAC and a 10 Mohm minimum insulation resistance, and the dual ball-bearing system is rated for 70,000 hours at 40 degrees C. Acoustic output is 73 dB(A) at one meter, acceptable for outdoor cabinets and remote terminal sites where the fan sits behind an acoustic baffle. The 20AWG, 500 mm flying lead simplifies field replacement in 19-inch racks and wall-mount enclosures. Typical deployments include telecom -48VDC rectifier bays, remote radio head thermal management, energy-storage DC cabinets, railway signaling enclosures and outdoor telecommunication shelters. The fan is CE and RoHS compliant and is built under FANOVA's ISO 9001 quality system in Suzhou, China.

Product Specification

The FB3G133-48PL-71 is a 133 mm diameter backward-curved centrifugal blower engineered around a 48VDC nominal bus that accepts 36 to 57VDC, matching the -48VDC plant convention used in wireline and wireless telecom sites. Its single-phase brushless DC motor, designated BLDCDC72, is built on a 72 mm rotor stack and an eight-pole permanent-magnet rotor; the stator is wound with class B enameled copper and vacuum-impregnated to resist vibration. At the 48 V design point the fan consumes 0.95 A and 45.6 W while turning 4460 RPM, producing a free-delivery airflow of 291.3 CFM (495 m3/h) and a maximum static pressure of 1.87 in.wg (468 Pa). The impeller is injection-molded from glass-fiber reinforced propylene, with 41 backward-curved blades that are radiused at the trailing edge to suppress vortex shedding; the hub is ultrasonically welded to the blade ring for balance retention. The impeller is dynamically balanced to ISO 1940 G6.3 and mounted on a ground steel shaft carried by two pre-lubricated deep-groove ball bearings rated L10 = 70,000 hours at 40 degrees C ambient. The die-cast aluminum endcap, finished with a conversion coating, serves as the motor heat sink and as the structural interface for four M4 mounting bosses on a 125 mm bolt circle. Electrical termination is a 500 mm flying lead of 20AWG, four-conductor cable (red +48V, black 0V, yellow tachometer, blue PWM), stripped and tinned for direct insertion into terminal blocks. The control interface accepts a 25 kHz PWM signal from 0 to 100 percent duty, with tachometer output of two pulses per revolution, and includes locked-rotor, over-current and reverse-polarity protection. Insulation resistance is at least 10 Mohm at 500 VDC, and the fan withstands a 500 VAC dielectric test for one minute. Acoustic emission is 73 dB(A) at one meter at rated speed. The fan is CE marked and RoHS compliant, and each unit is 100 percent run-in and hipot tested before packing under FANOVA's ISO 9001 quality management system.

Nominal Date
DC Backward Curved Centrifugal Fan image.png
Type FB3G133-48PL-71
Model BLDCDC72

 

Nominal Voltage VDC 48
Voltage range VDC 36~57
Current draw A 0.95±10%
Speed(RPM) min-1  4460±5%
Power consumption W 45.6±10%
Sound Pressure Level dB(A) 73±5%
Max. Air Flow CFM / m3 /H 291.3/495
Max. Static Pressure In.wg /Pa 1.87/468
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G133-48PL-71 delivers 495 m3/h at 468 Pa while drawing only 45.6W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 133mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 133mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000