Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G133-24PL-51 DC Backward Curved Centrifugal Fan 133mm 24V 264 m3/h

FB3G133-24PL-51

Nominal Voltage VDC 24
Current draw A 1.2±10%
Speed(RPM) min-1  3850±5%
Power consumption W 28.8±10%
Max. Air Flow CFM / m3 /H 155.4/264
Max. Static Pressure In.wg /Pa 1.48/371

50pcs

Brand:
FANOVA
Spu:
FB3G133-24PL-51
  • Overview
  • Recommended Products
Brief Description

Engineered for noise-sensitive installations that still demand real pressure, the FB3G133-24PL-51 backward curved centrifugal fan is a 133 mm plastic impeller blower that delivers up to 155.4 CFM (264 m3/h) and 1.48 in.wg (371 Pa) while running at only 59 dB(A). Its glass-fiber reinforced propylene wheel and die-cast aluminum housing keep the rotating mass low, so the 53 mm rotor spins at 3850 RPM without the drumming and airflow rumble typical of metal blowers. Powered by a BLDCDC53 brushless DC motor at 24VDC nominal (16-28VDC range), it draws just 1.2 A and consumes 28.8 W, making it a natural fit for battery-backed equipment, solar-powered cabinets and off-grid ventilation where every watt counts. Speed is set by a 0-10VDC analog signal, PWM input or onboard potentiometer, giving OEMs a single fan that can be tuned at commissioning rather than swapped for a different RPM variant. Motor protection includes locked-rotor and reverse-polarity safeguarding, Class B insulation and an electronically commutated drive that holds speed stable as supply voltage sags. Dual ball bearings rated for 70,000 hours at 40 degrees C support continuous duty, and the 20AWG 500 mm flying lead with standard 4-pin connector simplifies harness integration. Typical applications include medical and laboratory fume hoods, air purifiers, telecom enclosures, EV battery thermal management, heat-recovery ventilators and compact air-handling units. The fan is CE and RoHS compliant and is manufactured under FANOVA's ISO 9001 quality system in Suzhou, China.

Product Specification

The FB3G133-24PL-51 is built around a 133 mm diameter backward curved impeller molded from propylene compounded with glass fiber, a material chosen for its stiffness-to-weight ratio and resistance to the mildly acidic condensates found in ventilation and battery-pack exhaust streams. The wheel carries a hub-to-shroud blade count optimized for the 3850 RPM design point, with a backward-curved blade exit angle that produces a steep pressure curve and keeps the operating range wide enough to tolerate filter loading without stalling. Because the impeller is injection molded, blade profiles and tip clearances are held to tolerances that are difficult to achieve in stamped metal, and the resulting flow path is smooth enough to suppress the broadband noise that usually dominates small centrifugal fans. The wheel is dynamically balanced after assembly and mounts directly on the motor shaft, eliminating belt or coupling losses. The single-inlet housing is die-cast aluminum, machined at the inlet throat for a tight running clearance and finished to resist corrosion in indoor and sheltered outdoor installations. A 53 mm rotor diameter keeps the motor compact and allows the complete assembly to fit into tight plenum spaces while preserving a generous inlet eye area for low entrance losses. The BLDCDC53 brushless DC motor is a three-phase electronically commutated design with integrated Hall sensors and a surface-mounted drive board. At 24VDC nominal, with an operating window of 16 to 28VDC, the fan draws 1.2 A and produces 28.8 W of shaft power, which translates to 155.4 CFM free air and a maximum static pressure of 1.48 in.wg (371 Pa). Speed can be commanded through a 0-10VDC analog input, a 25 kHz PWM duty-cycle signal or an onboard trim potentiometer, and a tachometer output provides two pulses per revolution for stall detection and DCIM-style monitoring. The drive includes soft-start, locked-rotor protection with automatic restart, reverse-polarity protection and over-temperature foldback, so the fan survives miswiring during commissioning and brownout conditions on battery buses. Insulation is Class B, the winding is impregnated against vibration, and the commutation electronics are conformally coated for humidity resistance. Mechanical support comes from two pre-lubricated ball bearings rated for 70,000 hours L10 life at 40 degrees C ambient, mounted in a vibration-isolated bearing tube that limits structure-borne noise transmission into the equipment chassis. The electrical interface is a 500 mm, 20AWG four-conductor cable with flying leads, color-coded for power, ground, control and tach, allowing direct connection to a terminal block or crimped connector without a separate harness. Acoustic output is 59 dB(A) at one meter, measured at the nominal operating point, low enough for use in occupied spaces such as medical offices, laboratory benches and residential air purifiers. The fan is CE marked and RoHS compliant, and production is controlled under FANOVA's ISO 9001 quality management system with 100 percent end-of-line run testing for speed, current and noise. Custom cable lengths, connector types and speed-set variants are available for OEM programs.

Nominal Date
DC Backward Curved Centrifugal Fan image.png
Type FB3G133-24PL-51
Model BLDCDC53

 

Nominal Voltage VDC 24
Voltage range VDC 16~28
Current draw A 1.2±10%
Speed(RPM) min-1  3850±5%
Power consumption W 28.8±10%
Sound Pressure Level dB(A) 59±5%
Max. Air Flow CFM / m3 /H 155.4/264
Max. Static Pressure In.wg /Pa 1.48/371
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G133-24PL-51 delivers 264 m3/h at 371 Pa while drawing only 28.8W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 133mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 133mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000