Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FG3G450-4AGL-3B EC Axial Fan 450mm 380V 9085 m3/h

FG3G450-4AGL-3B

Nominal Voltage VAC 380
Current draw A 1.6±10%
Speed(RPM) min-1  2550±5%
Power consumption W 950±10%
Max. Air Flow CFM / m3 /H 5346.5/9085
Max. Static Pressure In.wg /Pa 1.76/440

50pcs

Brand:
FANOVA
Spu:
FG3G450-4AGL-3B
  • Overview
  • Recommended Products
Brief Description

When a single 450 mm axial fan can move 9085 m3/h (5346.5 CFM) while drawing 950 W, the engineering conversation shifts from adding fans to eliminating them. The FG3G450-4AGL-3B is built for exactly that: one heavy-duty impeller replacing banks of smaller units in air-cooled condensers, cooling towers, and process ventilation skids. Its 380VAC three-phase EC motor (BLDCEC138, operating range 304-456V) delivers 2550 RPM at 1.6 A, so a single fan handles duties that previously required two or three smaller axial fans plus their wiring, contactors, and control hardware. The cold-rolled steel impeller is the durability story: steel blades resist erosion from dust-laden airstreams, tolerate higher ambient temperatures than plastic, and hold balance over years of continuous operation, while the die-cast aluminum endcap and 138 mm rotor anchor the rotating assembly against vibration. Speed is controlled through a 0-10V interface, giving variable airflow without external VFDs, and the motor includes integrated protection and Class F insulation for long service in hot rooftop and plant-room environments. Bearings are rated for 40,000 hours at 40C, with sealed construction and life-lubricated design suited to maintenance-free installations. Typical applications include condenser cooling, industrial exhaust, tunnel ventilation, and new-energy equipment cooling, where the 83.4 dB(A) sound level and high-volume airflow are balanced by EC controllability. The fan carries CE and RoHS certification and is manufactured under ISO 9001 quality management.

Product Specification

The FG3G450-4AGL-3B is a 450 mm axial fan built around a cold-rolled steel impeller and a 138 mm BLDC EC motor, configured for 380VAC three-phase supply across a 304-456V operating window. The impeller uses cold-rolled steel plate formed into aerodynamically profiled blades and welded to a steel hub; steel construction was chosen over plastic for this high-power duty because it resists blade erosion in dusty industrial airstreams, maintains dimensional stability at elevated temperatures, and holds dynamic balance through continuous operation. Blades are statically and dynamically balanced after assembly, and the impeller is mounted directly on the motor shaft to avoid belt losses. The die-cast aluminum endcap houses the motor and provides a rigid mounting structure with machined surfaces for concentricity. The BLDCEC138 motor is a three-phase electronically commutated design with an integrated inverter, delivering 950 W at 2550 RPM with 1.6 A input current. The integrated drive accepts 0-10V control signals for stepless speed adjustment, allowing airflow to be trimmed to actual system demand rather than fixed by impeller geometry; starting current is limited electronically, avoiding the high inrush typical of AC induction motors. Electrical connection is via an 18AWG cable, with the motor protected against overcurrent, overvoltage, undervoltage, and locked-rotor conditions. Insulation is Class F, and the motor is designed for ambient temperatures up to 60C in the airstream. The bearing system uses sealed, life-lubricated ball bearings rated for 40,000 hours at 40C, selected for low noise and maintenance-free operation; the rotor is balanced to ISO 1940 grade G6.3 to limit vibration and extend bearing life. The fan produces a maximum airflow of 9085 m3/h (5346.5 CFM) at free delivery and a sound pressure level of 83.4 dB(A), with the steel impeller contributing to a lower-frequency noise signature than comparable plastic-impeller designs. The assembly is protected against dust and moisture ingress to IP54 as standard on the motor enclosure, with IP55 available on request. Quality control includes 100 percent run-in testing, hipot testing, and performance verification on an AMCA-style test stand. The fan is CE and RoHS certified and produced in an ISO 9001-certified facility. Typical applications include air-cooled condensers, cooling towers, industrial exhaust systems, tunnel ventilation, and cooling of new-energy power equipment, where the combination of high airflow, steel durability, and EC speed control replaces multiple smaller fans and their associated electrical infrastructure.

Nominal Date
AC Axial Fan image.png
Type FG3G450-4AGL-3B
Model BLDCEC138

 

Nominal Voltage VAC 380
Voltage range VAC 304~456
Current draw A 1.6±10%
Speed(RPM) min-1  2550±5%
Power consumption W 950±10%
Sound Pressure Level dB(A) 83.4±5%
Max. Air Flow CFM / m3 /H 5346.5/9085
Max. Static Pressure In.wg /Pa 1.76/440
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FG3G450-4AGL-3B delivers 9085 m3/h at 440 Pa while drawing only 950W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 450mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 450mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000