Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FK3G220-48PL-90 DC Plug Fan 220mm 48V 1042 m3/h

FK3G220-48PL-90

Nominal Voltage VDC 48
Current draw A 2.25±10%
Speed(RPM) min-1  3150±5%
Power consumption W 108±10%
Max. Air Flow CFM / m3 /H 613.5/1042.4
Max. Static Pressure In.wg /Pa 2.2/550

50pcs

Brand:
FANOVA
Spu:
FK3G220-48PL-90
  • Overview
  • Recommended Products
Brief Description

The FK3G220-48PL-90 plug fan is purpose-built for the -48 VDC power architecture that dominates telecom central offices, edge data centers and remote radio sites, letting you run a 220 mm backward-curved centrifugal impeller directly from the station battery bus without any intermediate AC inverter. Its superpower is native 48 VDC operation across a wide 36-57 V range, so the same fan keeps delivering stable cooling whether the plant is on float charge or in deep discharge. At 3150 RPM the unit moves up to 1042.4 m3/h (613.5 CFM) and develops 550 Pa (2.2 in.wg) of static pressure while drawing only 2.25 A and 108 W, a power envelope that a single 48 V rectifier branch can support many times over. The impeller is molded from glass-fiber reinforced propylene, giving it a low mass moment of inertia for fast spin-up and excellent resistance to the humid, mildly corrosive atmospheres found in battery rooms and outdoor cabinets. Drive comes from the BLDCDC92 brushless DC motor, an integrated electronically commutated package with sinusoidal commutation for low torque ripple and quiet, vibration-free rotation. Speed is set through a 0-10 V analog input or PWM signal, and a tachometer output reports actual RPM back to the DCIM or site controller for closed-loop airflow management. Electrical safety is reinforced by Class B insulation, locked-rotor and over-temperature protection, and reverse-polarity tolerance on the DC input, while the die-cast aluminum endcap provides a rigid, grounded mounting interface. Rated bearing life exceeds 70,000 hours at 40 degrees C, matching the ten-year service expectations of telecom infrastructure. Typical installations include 48 V rack cooling, remote radio head enclosures, outdoor telecom cabinets, energy-storage battery compartments and off-grid solar-hybrid shelters. The fan carries CE and RoHS declarations and is manufactured under an ISO 9001 quality system.

Product Specification

The FK3G220-48PL-90 is a 220 mm diameter backward-curved centrifugal plug fan assembled around the BLDCDC92 brushless DC motor platform. The impeller is injection-molded in glass-fiber reinforced propylene, a material chosen for its combination of stiffness, fatigue resistance and chemical inertness; the fiber loading raises the elastic modulus so the blades hold their aerofoil section at 3150 RPM while keeping rotating mass low, which shortens acceleration time and reduces start-up current. The backward-curved blade geometry, optimized in CFD for the 220 mm frame, produces a steep pressure-flow characteristic that tolerates the high system resistance of dense electronics racks and long exhaust ducts. Air performance reaches 1042.4 m3/h free delivery and 550 Pa maximum static pressure, with the best-efficiency point falling in the middle of the curve where telecom heat exchangers typically operate. The die-cast aluminum endcap doubles as the motor heat sink and the structural interface to the enclosure panel, machined flat to within 0.1 mm for a vibration-free seat; the complete rotating assembly is dynamically balanced to ISO 1940 G6.3. Inside, the BLDCDC92 motor uses a three-phase stator with concentrated windings and a rotor carrying bonded rare-earth magnets, commutated electronically by an integrated driver board. The drive accepts 36 to 57 VDC, nominal 48 V, and delivers 108 W at 2.25 A with efficiency above 85 percent at rated point. Speed control is available through a 0-10 VDC analog input, a 25 kHz PWM input or an optional onboard potentiometer; a open-collector tachometer output provides two pulses per revolution for RPM verification, and a fault output can be wired to a dry-contact alarm in the site controller. The input stage includes inrush limiting, reverse-polarity protection and transient suppression to IEC 61000-4-5, and radiated emissions are contained below CISPR 11 Class B limits. Motor windings are Class B insulated (130 degrees C) with a designed hot-spot margin of 20 K at rated load, and the electronics are conformally coated for operation in condensing humidity. Bearings are pre-lubricated sealed ball bearings with a calculated L10 life exceeding 70,000 hours at 40 degrees C ambient, and the motor is protected against locked rotor, over-current and over-temperature by the internal controller. Electrical connection is made through a 500 mm flying lead of 20 AWG wire, color-coded for positive, negative, control and tachometer signals, with the cable exit oriented to suit side or rear wiring. The fan is designed for panel-mount installation using the four M4 threaded inserts in the aluminum endcap; mounting in any orientation is permitted, although shaft-horizontal is preferred for maximum bearing life. Operating ambient range is -20 to +60 degrees C with derating above 40 degrees C, and the unit withstands 2 g vibration to IEC 60068-2-6. Each fan is routine-tested for hipot, insulation resistance, speed accuracy and balance before packing, and production runs are sampled for airflow and acoustic performance against the published curve. The FK3G220-48PL-90 complies with the CE Low Voltage and EMC directives and with RoHS 2011/65/EU, and is produced in a facility certified to ISO 9001:2015.

Nominal Date
DC Plug Fan image.png
Type FK3G220-48PL-90
Model BLDCDC92

 

Nominal Voltage VDC 48
Voltage range VDC 36~57
Current draw A 2.25±10%
Speed(RPM) min-1  3150±5%
Power consumption W 108±10%
Sound Pressure Level dB(A) 71±5%
Max. Air Flow CFM / m3 /H 613.5/1042.4
Max. Static Pressure In.wg /Pa 2.2/550
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FK3G220-48PL-90 delivers 1042.4 m3/h at 550 Pa while drawing only 108W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 220mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 220mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000