Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G310-48PK-21 DC Backward Curved Centrifugal Fan 310mm 48V 3721 m3/h

FB3G310-48PK-21

Nominal Voltage VDC 48
Current draw A 10.4±10%
Speed(RPM) min-1  2360±5%
Power consumption W 500±10%
Max. Air Flow CFM / m3 /H 2189.8/3721
Max. Static Pressure In.wg /Pa 3.36/840

50pcs

Brand:
FANOVA
Spu:
FB3G310-48PK-21
  • Overview
  • Recommended Products
Brief Description

When a single fan can carry a 3721 m3/h air duty against 840 Pa of system resistance, the usual rack of parallel blowers becomes unnecessary, and that consolidation is exactly what the FB3G310-48PK-21 was engineered to deliver. Built on a 310 mm glass-fiber reinforced polypropylene impeller with backward-curved blades, this 48VDC backward curved centrifugal fan pairs a 500 W output with a 2360 RPM ceiling to move 2189.8 CFM while holding 3.36 in.wg of static pressure, so long duct runs and dense filter banks no longer force engineers to split the airflow across multiple units. The BLDCDC102 brushless DC motor accepts a 36 to 57 VDC input window and draws 10.4 A at full load, making it a direct fit for telecom -48VDC plants, battery-backed DC microgrids and renewable energy cabinets where AC conversion would add cost and failure points. Speed is commanded electronically through the motor's DC control interface, allowing continuous modulation from standstill to rated RPM without the slip losses of an AC induction drive, and the die-cast aluminum endcap and housing spread heat away from the windings during sustained high-power operation. Insulation is rated Class F with a protection scheme suited to industrial cabinets, and the dual ball-bearing rotor assembly is specified for long L10 life at elevated temperature. Typical deployments include data center DCIM cooling rows, EV charging enclosures, energy storage thermal management, industrial exhaust and make-up air units, and cleanroom recirculation. The fan is manufactured under FANOVA's OEM/ODM quality system and is available with CE and RoHS documentation to support global project approvals. Because the impeller is a lightweight composite rather than steel, it resists chemical attack and cuts rotating mass, which lowers start-up current and bearing load while keeping the 81 dB(A) sound signature predictable across the speed range.

Product Specification

The FB3G310-48PK-21 is a 48VDC backward curved centrifugal fan assembled around a 310 mm diameter impeller molded from glass-fiber reinforced polypropylene. Each of the impeller's backward-curved blades is produced in a matched tool to hold uniform chord and exit angle, which keeps the velocity profile across the outlet stable and suppresses the turbulent shedding that causes tonal noise in lower-grade wheels. Glass-fiber loading raises the blade stiffness enough to resist deflection at 2360 RPM while retaining the chemical tolerance and low mass of a polymer rotor; the resulting low inertia lets the BLDCDC102 motor accelerate to command speed in a fraction of the time a comparable steel wheel would require, and it reduces the radial load carried by the shaft. The impeller is dynamically balanced after molding and is mounted in a die-cast aluminum endcap and housing that combine structural rigidity with efficient conduction of motor heat, an important advantage in enclosed cabinets where convection alone is insufficient. The BLDCDC102 brushless DC motor is a permanent-magnet, electronically commutated design with an integrated rotor position sensing scheme and a 102 mm rotor diameter. It operates from a 36 to 57 VDC supply, nominally 48VDC, and consumes 10.4 A at the 500 W rated point, delivering 2360 RPM at the shaft. Speed control is handled through the motor's DC control interface, which accepts an analog command voltage and provides a tachometer or frequency output for closed-loop monitoring; this allows the fan to be integrated directly into a DCIM or building management platform that trims airflow to actual thermal demand instead of running at fixed speed. Electrical protection covers over-current, over-voltage, under-voltage lockout and locked-rotor shutdown, and the winding system is built to Class F insulation limits for thermal margin under continuous duty. The motor is connected through a 164 mm lead set of 20AWG cable, sized to carry the 10.4 A full-load current with acceptable voltage drop over the standard harness length; longer runs should be sized by the installer. The rotor runs in a matched pair of precision ball bearings preloaded for axial and radial stiffness, lubricated for the life of the unit and rated for extended L10 hours at the specified operating temperature. Mechanical installation uses the standard 310 mm platform footprint with the outlet oriented to match the housing scroll; the fan may be mounted in any attitude that keeps the impeller axis within the bearing specification. Performance is characterized at maximum airflow of 2189.8 CFM (3721 m3/h) and maximum static pressure of 3.36 in.wg (840 Pa), with the operating point selected anywhere along the published curve by modulating speed. Acoustic output is 81 dB(A) at the free-field reference point, and the composite impeller's damped resonance keeps the spectrum free of the sharp blade-pass tones typical of metal wheels. The unit is built in FANOVA's Suzhou facility under an ISO-based quality system, with CE and RoHS declarations available for project submittals, and can be customized for cable length, connector type and control protocol under the company's OEM/ODM program.

Nominal Date
DC Backward Curved Centrifugal Fan image.png
Type FB3G310-48PK-21
Model BLDCDC102

 

Nominal Voltage VDC 48
Voltage range VDC 36~57
Current draw A 10.4±10%
Speed(RPM) min-1  2360±5%
Power consumption W 500±10%
Sound Pressure Level dB(A) 81±5%
Max. Air Flow CFM / m3 /H 2189.8/3721
Max. Static Pressure In.wg /Pa 3.36/840
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G310-48PK-21 delivers 3721 m3/h at 840 Pa while drawing only 500W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 310mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 310mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000