Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FK3G250-24PL-20 DC Plug Fan 250mm 24V 1481 m3/h

FK3G250-24PL-20

Nominal Voltage VDC 24
Current draw A 12.3±10%
Speed(RPM) min-1  3100±5%
Power consumption W 295.2±10%
Max. Air Flow CFM / m3 /H 871.5/1480.9
Max. Static Pressure In.wg /Pa 3.6/901

50pcs

Brand:
FANOVA
Spu:
FK3G250-24PL-20
  • Overview
  • Recommended Products
Brief Description

A 24 VDC plug fan engineered for high-head duty, the FK3G250-24PL-20 combines a 901 Pa maximum static pressure with 295.2 W of delivered power, letting one 250 mm impeller replace two or three lower-pressure fans in a dense filter stack or long duct run. Running from a 16 to 28 VDC supply at 12.3 A and 3100 RPM, it produces up to 1480.9 m3/h (871.5 CFM) while drawing current only where the pressure curve demands it, which makes it a natural fit for off-grid ventilation, solar-powered telecom shelters, battery cabinets and mobile equipment where a safe low-voltage rail is the only power available. The impeller is molded from glass-fiber reinforced propylene, giving a light rotating mass that spins up quickly, resists moisture and many chemical vapors, and keeps bearing loads low; the die-cast aluminum endcap rigidly locates the 102 mm rotor and acts as a heat sink for the BLDCDC102 brushless DC motor. Speed is commanded over a 0 to 10 V analog interface with PWM and tachometer feedback available, so airflow can be trimmed to the exact pressure the filter or duct network presents, and the integrated electronics handle soft start and locked-rotor protection without external contactors. Insulation is Class F with a Class B rise limit, the winding is vacuum-impregnated, and polarity-reversal protection guards the drive against miswiring in the field. Bearings are sealed and pre-lubricated for 40,000 hours at 40 degrees C ambient, and the 20AWG, 123 mm flying lead with its compact connector keeps installation depth to a minimum inside an air handler. Typical applications include HEPA and bag-filter housings, cleanroom pressurization, EV charger and energy-storage cooling, refrigeration condensers, lab exhaust and industrial control-panel ventilation. The fan is CE and RoHS compliant, and every unit is run-in and curve-tested before shipment from FANOVA's Suzhou plant.

Product Specification

The FK3G250-24PL-20 is built around a 250 mm diameter backward-curved centrifugal impeller injection-molded in glass-fiber reinforced propylene. The blade profile is a high-efficiency backward-inclined design with a carefully matched inlet cone, and the glass-fiber loading raises the elastic modulus of the plastic so the wheel holds its shape at 3100 RPM without the weight penalty of steel. Compared with a metal wheel of the same diameter the rotating assembly is markedly lighter, which shortens acceleration time, reduces start-up inrush and lowers the radial load carried by the motor bearings. The hub is over-molded onto a steel insert that centers the wheel on the rotor shaft, and the whole assembly is dynamically balanced in two planes to a residual unbalance well inside ISO 1940 G6.3, keeping vibration and structure-borne noise low across the operating range. The impeller is enclosed by a die-cast aluminum endcap that also serves as the motor housing; the casting carries deep cooling fins and machined mounting faces, giving a stiff, dimensionally stable structure that holds the 102 mm rotor concentric with the inlet orifice even under the reaction torque of a 295.2 W drive. The fan delivers a maximum airflow of 1480.9 m3/h (871.5 CFM) and a maximum static pressure of 901 Pa (3.6 in. wg), and its steep pressure characteristic means it holds flow well against the resistance of long duct runs, dense filter banks and multi-outlet plenums. The prime mover is the BLDCDC102, a three-phase brushless DC motor with an integrated commutating drive. Hall-effect sensors provide rotor position feedback, and the controller uses sinusoidal commutation to suppress torque ripple and the associated tonal noise; the result is a smooth, quiet 67 dB(A) sound pressure level at one meter. The motor accepts any DC input from 16 to 28 VDC, drawing 12.3 A at the nominal 24 V operating point, and it is protected against over-voltage, under-voltage, over-current, locked rotor and reverse polarity. Speed is set through a 0 to 10 V analog control input, with a PWM duty-cycle input and an open-collector tachometer output available on the same lead for closed-loop control by a building management system or a dedicated DCIM controller. A soft-start ramp limits inrush to little more than the steady-state current, so a single 24 V power supply can feed several fans without oversizing. Electrically, the winding is Class F insulated and vacuum-impregnated for mechanical integrity and moisture resistance, with a Class B temperature-rise limit giving generous thermal margin at 40 degrees C ambient. The motor is fed by a 20AWG cable with a 123 mm flying lead, kept short so the fan can sit flush against a bulkhead inside compact air-handling equipment. Mechanical support comes from two sealed, pre-lubricated ball bearings rated for 40,000 hours of L10 life at 40 degrees C ambient, mounted in elastomer sleeves that damp the small residual vibration transmitted to the panel. The fan can be mounted in any orientation, and the die-cast aluminum housing provides a solid grounding path and effective heat dissipation for the integrated electronics. Each unit is run-in, hipot tested and performance-checked against its published curve before packing. The FK3G250-24PL-20 carries CE and RoHS marks and is manufactured in FANOVA's Suzhou facility under an ISO 9001 quality system, with RoHS-compliant materials throughout and full traceability by serial number.

Nominal Date
DC Plug Fan image.png
Type FK3G250-24PL-20
Model BLDCDC102

 

Nominal Voltage VDC 24
Voltage range VDC 16~28
Current draw A 12.3±10%
Speed(RPM) min-1  3100±5%
Power consumption W 295.2±10%
Sound Pressure Level dB(A) 67±5%
Max. Air Flow CFM / m3 /H 871.5/1480.9
Max. Static Pressure In.wg /Pa 3.6/901
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FK3G250-24PL-20 delivers 1480.9 m3/h at 901 Pa while drawing only 295.2W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 250mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 250mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000