Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FK3G133-1APL-70 EC Plug Fan 133mm 115V 468 m3/h

FK3G133-1APL-70

Nominal Voltage VAC 115
Current draw A 0.7±10%
Speed(RPM) min-1  4450±5%
Power consumption W 48±10%
Max. Air Flow CFM / m3 /H 275.7/468.4
Max. Static Pressure In.wg /Pa 1.76/441

50pcs

Brand:
FANOVA
Spu:
FK3G133-1APL-70
  • Overview
  • Recommended Products
Brief Description

When a compact air-mover must run all day on a standard North American 115 V circuit without a step-down transformer, the FK3G133-1APL-70 plug fan is the engineered answer. Its two headline strengths are native 115 VAC operation across a wide 92–138 V band and an ultra-low 48 W power draw, so OEMs can drop it straight into US and Japan equipment panels, keep the branch circuit light, and still harvest 275.7 CFM (468.4 m3/h) at free delivery. The impeller is a 133 mm backward-curved wheel molded from glass-fiber reinforced propylene, which cuts rotating mass, resists mild chemical attack and keeps cost predictable compared with metal wheels. A 72 mm BLDCEC72 electronically commutated rotor, driven by integrated EC72 electronics, reaches 4450 RPM and develops up to 1.76 In.wg (441 Pa) of static pressure, enough for dense filter packs or long duct runs. Speed is set through the onboard 0–10 V control interface, with PWM and tach output available for closed-loop supervision; the motor is electronically protected and insulated to Class B standards for this frame. Dual ball bearings deliver an L10 life of 70,000 hours at 40 °C, keeping maintenance intervals long in continuous-duty duty. At 67.8 dB(A) the unit suits aftermarket HVAC units, air purifiers, telecom cabinets, refrigeration condensers, lab fume hoods and light industrial ventilation. The fan carries CE and RoHS declarations and is built in FANOVA's ISO 9001 facility, with UL recognition available on request for the North American market. A 500 mm, 20 AWG lead exits the die-cast aluminum housing for quick field connection.

Product Specification

The FK3G133-1APL-70 is a plug-type backward centrifugal fan built around a single-piece impeller of glass-fiber reinforced propylene. The wheel measures 133 mm at the blade tips and carries a backward-curved blade set selected for a rising pressure characteristic, so the fan holds flow as downstream resistance climbs. Glass-fiber loading raises the tensile and creep resistance of the propylene, allowing thin, stiff blades that keep tip deflection low at the 4450 RPM design point while holding the rotating assembly to a fraction of the mass of a comparable steel wheel; the material also tolerates many mildly acidic and alkaline airstreams and will not rust in humid or coastal installations. The impeller is dynamically balanced after molding and mounts directly on the motor shaft, with the die-cast aluminum endcap acting as the structural hub that carries the bearing bores and dissipates motor heat into the airstream. Inside sits the BLDCEC72 rotor, a 72 mm permanent-magnet EC motor with integrated EC72 commutation electronics. The electronics convert the 115 VAC nominal supply, accepted over 92 to 138 V, into the three-phase drive for the stator, so the fan draws 0.7 A and 48 W at rated load instead of the higher current a shaded-pole AC motor of this output would demand. Speed is commanded over a 0–10 V DC analog input, and the same terminal block provides a PWM input and a frequency output tach signal for speed verification in the host controller; soft-start ramps current at power-up and locked-rotor and over-temperature protection are handled on board. Electrical connection is made through a 500 mm flying lead of 20 AWG wire, pre-stripped and tinned for direct insertion into terminal blocks or splice connectors. The motor is insulated to Class B and the winding is impregnated for moisture and vibration resistance. Mechanical support comes from a pair of pre-lubricated dual ball bearings rated for an L10 life of 70,000 hours at 40 °C ambient, giving years of uninterrupted duty in continuous operation. Acoustic output is held to 67.8 dB(A) at one meter, a level that permits installation in occupied rooms without secondary enclosures. The fan is qualified to CE and RoHS requirements and assembled under FANOVA's ISO 9001 quality system; UL recognition can be supplied for North American projects. Typical applications include fan coils and air handlers, air purification and HEPA filter modules, telecom and IT cabinet cooling, commercial refrigeration evaporators, laboratory exhaust and general industrial ventilation where a compact, low-power, 115 V backward-curved plug fan is required.

Nominal Date
AC Plug Fan image.png
Type FK3G133-1APL-70
Model BLDCEC72

 

Nominal Voltage VAC 115
Voltage range VAC 92~138
Current draw A 0.7±10%
Speed(RPM) min-1  4450±5%
Power consumption W 48±10%
Sound Pressure Level dB(A) 67.8±5%
Max. Air Flow CFM / m3 /H 275.7/468.4
Max. Static Pressure In.wg /Pa 1.76/441
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FK3G133-1APL-70 delivers 468.4 m3/h at 441 Pa while drawing only 48W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 133mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 133mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000