Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FF3G180-2AGL-20 EC Forward Curved Centrifugal Fan 180mm 230V 1320 m3/h

FF3G180-2AGL-20

Nominal Voltage VAC 230
Current draw A 2.2±10%
Speed(RPM) min-1  2460±5%
Power consumption W 495±10%
Max. Air Flow CFM / m3 /H 776.8/1320
Max. Static Pressure In.wg /Pa 5.06/1265

50pcs

Brand:
FANOVA
Spu:
FF3G180-2AGL-20
  • Overview
  • Recommended Products
Brief Description

When a ducted system demands extreme pressure and high airflow from a single compact impeller, the FF3G180-2AGL-20 answers with a rare combination: 1265 Pa of maximum static pressure and up to 1320 m3/h of free-air delivery from a 180 mm forward curved wheel, driven by a 495 W BLDCEC102 electronically commutated motor. Operating on 230VAC with a wide 184 to 270 V tolerance, this fan replaces fixed-speed AC centrifugal blowers at 2460 RPM without any external transformer, and its integrated EC drive accepts a 0-10V control signal for precise demand-based modulation. The galvanized steel sheet impeller is built for punishing industrial duty, resisting corrosion and abrasion in long-duct exhaust, high-resistance filter banks and multi-outlet manifolds, while the die-cast aluminum endcap and housing keep the assembly rigid and heat-dissipating. Electrical protection is engineered for continuous operation, with class F insulation and locked-rotor, over-current and over-temperature safeguards built into the motor electronics, and the long-life ball bearing system is rated for extended L10 service in high-temperature airstreams. At 76 dB(A) the unit is specified for mechanical rooms, air handling units and process ventilation rather than occupied spaces, and the 18AWG, 175 mm flying lead simplifies drop-in wiring where an AC centrifugal fan previously sat. Applications span HVAC air handling, industrial exhaust and filtration, new energy cabinet cooling and OEM ventilation assemblies. The FF3G180-2AGL-20 carries CE and RoHS compliance and is manufactured under FANOVA's ISO 9001 quality system in Suzhou, China, with full OEM/ODM support for custom cables, control interfaces and airflow tuning.

Product Specification

The FF3G180-2AGL-20 is a 180 mm forward curved centrifugal fan whose aerodynamic package is built around a galvanized steel sheet impeller rather than a molded plastic wheel. The wheel carries a dense, multi-blade forward curved blade set that generates high pressure coefficients at moderate tip speed, producing a maximum static pressure of 1265 Pa and a maximum airflow of 1320 m3/h (776.8 CFM) at free air. Because the blades are formed from galvanized steel sheet, the impeller tolerates the abrasion of dust-laden airstreams, the corrosion of humid exhaust and elevated airstream temperatures that would soften or creep a thermoplastic wheel, making it a durable choice for industrial filtration and long-duct ventilation. Each wheel is dynamically balanced before assembly to hold vibration low at the 2460 RPM operating point, which protects the motor bearings and limits structure-borne noise in the duct network.

The motor is a BLDCEC102 outer-rotor electronically commutated design with a 102 mm rotor diameter, rated 230VAC and accepting a supply range of 184 to 270 V. It draws 2.2 A and delivers 495 W of shaft power, placing this model firmly in the heavy-duty class where one EC fan can displace several smaller AC blowers. The integrated inverter produces a sinusoidal three-phase drive from the single-phase mains input, so the fan starts softly, avoids the inrush of an AC induction motor and holds efficiency high across the speed range. Speed control is through a 0-10V analog input, with PWM and RS485 options available on request, allowing the fan to follow duct static pressure, filter loading or CO2 demand. Because the electronics are powered directly from the AC line, no step-down transformer or external VFD is needed, which shrinks panel space and removes a maintenance item from the enclosure.

The mechanical package pairs the steel wheel with a die-cast aluminum endcap and housing. Aluminum was chosen for its dimensional stability, its ability to conduct heat away from the motor windings and its resistance to the warping that stamped steel housings can suffer in high-temperature airstreams. The bearing system uses long-life lubricated ball bearings sized for continuous industrial duty, with an L10 life calculated for sustained operation at rated speed; the sealed construction keeps dust out of the raceways in dirty exhaust applications. Insulation is class F, and the motor electronics include over-current, locked-rotor and over-temperature protection that shut the drive down before winding damage can occur. The electrical interface is a flying lead of 18AWG cable with 175 mm of free length, terminated ready for field connection.

All performance figures are measured at nominal 230VAC and 50/60 Hz, with the fan producing 76 dB(A) at the standard measurement position; sound pressure at the inlet and outlet varies with duct impedance and should be checked for each installation. The FF3G180-2AGL-20 meets CE and RoHS requirements and is produced under FANOVA's ISO 9001 certified quality management system in Suzhou, China. As an OEM/ODM manufacturer, FANOVA can supply customized cable lengths and connectors, alternative control interfaces, application-specific speed curves and private-label packaging, with airflow and static pressure verified on the company's own test benches before shipment.

Nominal Date
AC Forward Curved Centrifugal Fan image.png
Type FF3G180-2AGL-20
Model BLDCEC102

 

Nominal Voltage VAC 230
Voltage range VAC 184~270
Current draw A 2.2±10%
Speed(RPM) min-1  2460±5%
Power consumption W 495±10%
Sound Pressure Level dB(A) 76±5%
Max. Air Flow CFM / m3 /H 776.8/1320
Max. Static Pressure In.wg /Pa 5.06/1265
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FF3G180-2AGL-20 delivers 1320 m3/h at 1265 Pa while drawing only 495W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 180mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 180mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000