Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G225-2APL-9B EC Backward Curved Centrifugal Fan 225mm 230V 1682 m3/h

FB3G225-2APL-9B

Nominal Voltage VAC 230
Current draw A 1.5±10%
Speed(RPM) min-1  3500±5%
Power consumption W 210±10%
Max. Air Flow CFM / m3 /H 989.9/1682
Max. Static Pressure In.wg /Pa 3.54/884

50pcs

Brand:
FANOVA
Spu:
FB3G225-2APL-9B
  • Overview
  • Recommended Products
Brief Description

When a single backward curved centrifugal fan must replace a pair of smaller AC blowers in a crowded air handler, the FB3G225-2APL-9B delivers the airflow and pressure head to make that consolidation work. Its 225 mm glass-fiber reinforced polypropylene impeller, driven by a 92 mm BLDCEC92 motor at 3500 RPM, produces up to 1682 m3/h (989.9 CFM) and 884 Pa (3.54 in.wg) of static pressure while drawing just 210 W at 1.5 A on a universal 230VAC supply that tolerates 184-277 V without a step-down transformer. The electronically commutated motor accepts 0-10 VDC or PWM speed commands, so airflow can be trimmed to actual duct resistance instead of being fixed by a tapped PSC motor. Class F insulation and locked-rotor, over-current and over-temperature protection are built into the control board, and the sealed ball-bearing system is rated for 40,000 hours at 40 C ambient, keeping maintenance intervals long in continuous-duty installations. The die-cast aluminum endcap and housing resist vibration and dissipate motor heat, while the plastic impeller keeps rotor inertia low for fast ramp-up and quiet, surge-free operation across the pressure curve. Typical applications include commercial AHUs, VAV terminal boxes, cleanroom FFU banks, data center CRAC units, heat-pump outdoor sections and industrial exhaust cabinets. The fan carries CE and RoHS declarations and is manufactured under ISO 9001 in FANOVA's Suzhou plant, with UL-recognized components available on request.

Product Specification

The FB3G225-2APL-9B is a 225 mm backward curved centrifugal fan built around a glass-fiber reinforced polypropylene impeller. The wheel uses a hub-mounted, multi-blade backward-curved geometry in which the blade count and exit angle are tuned for a broad, stable operating band: the fan holds its pressure characteristic well past the nominal duty point, so it can serve long duct runs and high-resistance filter banks without falling into surge. Glass-fiber loading raises the blade stiffness and creep resistance compared with unfilled PP, allowing tip speeds at 3500 RPM while keeping the rotating mass low, which shortens acceleration time and reduces bearing loads during start-stop cycling. The impeller is dynamically balanced to ISO 1940 G6.3 before assembly. The stationary flow path is formed by a die-cast aluminum endcap and housing; the casting provides a rigid, dimensionally stable seat for the motor and the inlet orifice, damps structure-borne vibration, and acts as a heat spreader for the electronics. The rotor diameter is 92 mm, giving the BLDCEC92 motor a favorable torque-to-inertia ratio for its 210 W continuous rating. Motor technology is a three-phase electronically commutated (EC) design with permanent-magnet rotor and integrated commutation electronics; the drive is powered from a 230VAC nominal supply and operates across 184-277 VAC at 47-63 Hz, so it can be connected directly to single-phase mains in Europe, Asia and North America without an external transformer or VFD. Current draw is 1.5 A at the nominal point. Speed control is through isolated 0-10 VDC, 10 kOhm potentiometer or 25 kHz PWM inputs, with a 10 V reference output and tachometer feedback available on the control terminals; the fan also accepts a simple AC-line switching mode for fixed-speed duty. Electrical ratings include Class F insulation (155 C), a dielectric withstand test at 1500 VAC for one minute, and integrated locked-rotor, over-current, over-voltage and over-temperature protection that limits fault energy without external contactors. The motor is mounted on sealed, pre-lubricated ball bearings selected for an L10 life of 40,000 hours at 40 C ambient; the bearing seats are machined into the die-cast housing to maintain alignment over thermal cycles. The connection cable is 20AWG, 123 mm long, with flying leads for mains, control and status; the control board is conformally coated for resistance to humidity and airborne dust. Acoustic output is 70 dB(A) at the nominal operating point, measured at 1 m in free field. The fan is CE marked and RoHS compliant, with UL-recognized insulation system components available for UL 507 listings; production is controlled under ISO 9001 with 100 percent end-of-line run-in and hipot testing, and each unit is individually balanced and flow-checked before packing.

Nominal Date
AC Backward Curved Centrifugal Fan image.png
Type FB3G225-2APL-9B
Model BLDCEC92

 

Nominal Voltage VAC 230
Voltage range VAC 184~277
Current draw A 1.5±10%
Speed(RPM) min-1  3500±5%
Power consumption W 210±10%
Sound Pressure Level dB(A) 70±5%
Max. Air Flow CFM / m3 /H 989.9/1682
Max. Static Pressure In.wg /Pa 3.54/884
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G225-2APL-9B delivers 1682 m3/h at 884 Pa while drawing only 210W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 225mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 225mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000