FB3G500-4AAL-30
| Nominal Voltage | VAC | 380 |
| Current draw | A | 1.45±10% |
| Speed(RPM) | min-1 | 1100±5% |
| Power consumption | W | 850±10% |
| Max. Air Flow | CFM / m3 /H | 4649.2/7900 |
| Max. Static Pressure | In.wg /Pa | 1.8/450 |
10pcs
Move serious air volumes with a single 500 mm impeller: the FB3G500-4AAL-30 backward curved centrifugal fan delivers up to 7900 m3/h (4649.2 CFM) and 450 Pa of static pressure from one compact, high-power EC platform rated 850 W. Built around a 500 mm aluminum alloy impeller and a 137 mm rotor BLDCEC137 motor, this 380VAC unit (usable from 304VAC) draws only 1.45 A while spinning at 1100 RPM, so one large wheel can replace a bank of smaller fans, cutting cabinet penetrations, wiring, and maintenance points in air-handling units, cleanroom supply modules, and industrial exhaust skids. The die-cast aluminum endcap and housing add rigidity while helping dissipate motor heat under continuous duty. Speed is commanded through the integrated EC electronics, giving stepless 0-10V or PWM modulation for pressure, airflow, or temperature-based control without an external VFD. Insulation is Class F with thermal protection, and the brushless DC motor with sealed ball bearings is rated for long L10 life in horizontal or vertical mounting. Typical duties include HVAC air handling, rooftop ventilation, process cooling, and new-energy equipment racks where high flow meets moderate resistance. The fan is CE and RoHS compliant and backed by FANOVA's OEM/ODM engineering support for custom cable, connector, and control options. Model FB3G500-4AAL-30 is the high-volume answer when duct runs are short, filters are light, and the priority is pure cubic meters per hour.
The FB3G500-4AAL-30 belongs to FANOVA's backward curved centrifugal family and is engineered around a 500 mm diameter impeller cast in aluminum alloy. Its backward-curved blade geometry is selected for high specific speed duty: at 1100 RPM the wheel produces a maximum airflow of 7900 m3/h (4649.2 CFM) and a maximum static pressure of 450 Pa (1.8 In.wg), a balance that suits large air-handling units, plenum supply, and industrial dilution ventilation where the system curve stays relatively flat. The impeller is dynamically balanced as a complete rotating assembly, and the die-cast aluminum endcap and housing hold bearing alignment while acting as a heat path away from the motor. The drive is a BLDCEC137 electronically commutated motor with a 137 mm rotor diameter, rated 850 W at 380VAC nominal; the input stage tolerates a supply range down to 304VAC, and current demand is a modest 1.45 A at the design point, reflecting the efficiency of permanent-magnet EC technology over an induction motor plus VFD. Speed control is fully integrated: the onboard EC electronics accept an analog or PWM speed command and provide a tachometer feedback signal, allowing the fan to be slaved to a differential pressure sensor, a temperature controller, or a building management system without any external variable-frequency drive. Electrical protection includes Class F insulation and thermal overload safeguarding, and the motor is designed for continuous duty across the rated ambient envelope. The mechanical package uses sealed, pre-lubricated ball bearings selected for extended L10 life and quiet running at the 1100 RPM design speed; the assembly can be mounted in horizontal or vertical orientation subject to the installation instructions. Sound pressure at the free-field reference point is 83.5 dB(A), typical of a high-flow 500 mm wheel, and can be reduced by EC turndown where full flow is not required. Connection is made through a 1000 mm, 18AWG factory-fitted cable, with connector and lead-length variants available for OEM programs. The fan is CE and RoHS compliant and is produced under FANOVA's Suzhou quality system, with each unit balanced, hipot tested, and run-tested before shipment. Target applications include HVAC supply and return air handling, cleanroom and laboratory make-up air, process and equipment cooling, and ventilation of new-energy and industrial enclosures. FANOVA supports OEM/ODM customization of voltage windows, control interfaces, cabling, and mounting hardware for volume orders.
| AC Backward Curved Centrifugal Fan | ![]() |
|
| Type | FB3G500-4AAL-30 | |
| Model | BLDCEC137 | |
| Nominal Voltage | VAC | 380 |
| Voltage range | VAC | 304 |
| Current draw | A | 1.45±10% |
| Speed(RPM) | min-1 | 1100±5% |
| Power consumption | W | 850±10% |
| Sound Pressure Level | dB(A) | 83.5±5% |
| Max. Air Flow | CFM / m3 /H | 4649.2/7900 |
| Max. Static Pressure | In.wg /Pa | 1.8/450 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FB3G500-4AAL-30 delivers 7900 m3/h at 450 Pa while drawing only 850W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 500mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 500mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.