Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FG3G450-4AGL-3B EC Axial Fan 450mm 380V 9085 m3/h

FG3G450-4AGL-3B

Nominal Voltage VAC 380
Current draw A 1.6±10%
Speed(RPM) min-1  2550±5%
Power consumption W 950±10%
Max. Air Flow CFM / m3 /H 5346.5/9085
Max. Static Pressure In.wg /Pa 1.76/440

50pcs

Brand:
FANOVA
Spu:
FG3G450-4AGL-3B
  • Overview
  • Recommended Products
Brief Description

When a single 450 mm axial fan can move 9085 m3/h of air while drawing 950 W, the engineering conversation shifts from adding more fans to replacing whole banks of them. The FG3G450-4AGL-3B is that consolidation play: one large-diameter impeller, one heavy-duty EC motor, one point of maintenance. Its 380VAC three-phase input (304-456V operating window) feeds a BLDCEC138 motor that holds 2550 RPM with 1.6 A current draw, so the airflow-per-watt figure stays stable even when the supply sags or spikes on a loaded industrial bus. The impeller is stamped from cold-rolled steel plate rather than molded plastic, which is the decisive detail for plants running hot exhaust, dusty process air or abrasive particulates: steel holds its blade geometry for years where polymer hubs fatigue. Around it, a die-cast aluminum endcap and housing give the 138 mm rotor a rigid, thermally conductive cradle, helping the electronics shed heat during continuous duty. Speed is commanded electronically over the EC interface, so airflow can be trimmed to match damper position, sensor feedback or time-of-day schedules instead of being fixed by a belt or transformer tap. Insulation and protection are built for panel and duct mounting in real facilities, and the 18AWG cable keeps field wiring straightforward. With a 450 mm class impeller and 950 W of motor headroom, this model suits industrial ventilation, HVAC air-handling retrofits, drying tunnels, cooling towers and new-energy plant rooms where designers want fewer, larger fans. It is CE and RoHS aligned and backed by FANOVA's Suzhou manufacturing and OEM/ODM support.

Product Specification

The FG3G450-4AGL-3B is built around a 450 mm axial impeller formed from cold-rolled steel plate, a material choice that defines the fan's mechanical character. Blades are stamped and profiled to a high-pressure axial section, then balanced as an assembly so that vibration stays low across the 2550 RPM operating point. Cold-rolled steel offers higher stiffness and wear resistance than molded thermoplastics, which matters in airstreams carrying grit, lint, solder fume or elevated temperatures; the blade edges resist erosion and the hub-to-blade joint does not creep under sustained centrifugal load. The impeller is matched to a die-cast aluminum endcap and housing, which stiffens the rotating assembly, damps resonance and conducts motor heat into the airstream. At the core sits the BLDCEC138 electronically commutated motor, a 138 mm rotor diameter unit rated 950 W at 380VAC nominal, with a rectified input range of 304 to 456V and a running current of 1.6 A. EC commutation replaces brushes and slip rings with power electronics, so speed is controlled by PWM or 0-10V style command signals rather than by voltage variation, giving stepless adjustment from a low purge speed up to the full 2550 RPM rating. At maximum output the fan delivers 5346.5 CFM (9085 m3/h), enough for a single unit to serve duct runs that would otherwise require several smaller axial fans, and the accompanying reduction in fan count lowers both capital cost and maintenance touchpoints. Electrical protection, insulation class and dielectric clearances are engineered for industrial panel and rooftop installation, and the supplied 18AWG cable is sized for the 1.6 A draw with margin for inrush and ambient derating. Bearings are long-life sealed units selected for horizontal and vertical mounting orientations, with a design life that supports continuous 24/7 duty in ventilation and process cooling. Acoustic output is 83.4 dB(A) at full speed, a figure consistent with a high-flow industrial axial, and variable-speed operation allows night setbacks or partial-load running well below that level. The fan is suited to HVAC air-handling units, industrial exhaust and supply, drying and curing tunnels, cooling tower and condenser duty, battery and new-energy plant rooms, and OEM equipment integration. Each unit is functionally tested before dispatch and is compliant with CE and RoHS requirements under FANOVA's Suzhou quality system, with OEM/ODM customization of cabling, connectors, mounting flanges and control interfaces available.

Nominal Date
AC Axial Fan image.png
Type FG3G450-4AGL-3B
Model BLDCEC138

 

Nominal Voltage VAC 380
Voltage range VAC 304~456
Current draw A 1.6±10%
Speed(RPM) min-1  2550±5%
Power consumption W 950±10%
Sound Pressure Level dB(A) 83.4±5%
Max. Air Flow CFM / m3 /H 5346.5/9085
Max. Static Pressure In.wg /Pa 1.76/440
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FG3G450-4AGL-3B delivers 9085 m3/h at 440 Pa while drawing only 950W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 450mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 450mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000