Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G310-4APK-60 EC Backward Curved Centrifugal Fan 310mm 380V 4000 m3/h

FB3G310-4APK-60

Nominal Voltage VAC 380
Current draw A 1.25±10%
Speed(RPM) min-1  2700±5%
Power consumption W 790±10%
Max. Air Flow CFM / m3 /H 2354/4000
Max. Static Pressure In.wg /Pa 4.0/1000

50pcs

Brand:
FANOVA
Spu:
FB3G310-4APK-60
  • Overview
  • Recommended Products
Brief Description

The FB3G310-4APK-60 redefines what a single 310 mm backward-curved centrifugal fan can achieve: it pairs an exceptionally high 4.0 in.wg (1000 Pa) static pressure ceiling with a 2354 CFM (4000 m3/h) free-air flow rate, letting one compact impeller replace multiple smaller blowers in long-duct, high-filter-load air systems. That pressure-flow envelope is driven by a 790 W electronically commutated BLDCEC102 motor running from 380VAC three-phase supply (operating range 304V minimum), spinning at 2700 RPM while drawing just 1.25 A per phase, so the high workload is delivered without the current spikes of a comparable AC induction package. The impeller is molded from glass-fiber reinforced propylene, a lightweight composite that resists chemical attack and humidity while keeping rotating mass low enough to protect bearing life at 2700 RPM; the die-cast aluminum endcap and housing add structural rigidity and heat dissipation around the rotor. Speed is commanded through the integrated EC control interface, giving stepless modulation across the full 2700 RPM range for demand-based ventilation, pressure-hold filter control or night setback without external VFD hardware. Electrical protection and insulation are built to the standards required for industrial HVAC service, and the 18AWG, 1000 mm factory cable simplifies wiring in cramped air-handling cabinets. With a sound level of 84 dB(A), this model is intended for mechanical rooms, rooftop units and process enclosures rather than occupied spaces, and it is suited to high-static-pressure HEPA filtration, long-run ducted exhaust, cleanroom makeup air, energy-storage cabinet cooling and industrial process ventilation. The fan is CE and RoHS compliant and is manufactured under FANOVA's ISO 9001 quality system, with OEM/ODM customization of voltage, cable length and control protocol available.

Product Specification

At the heart of the FB3G310-4APK-60 is a 310 mm diameter backward-curved centrifugal impeller molded in glass-fiber reinforced propylene. The composite construction delivers a favorable strength-to-weight ratio: blade geometry is held stable at the 2700 RPM design point, while the lower inertia compared with a steel impeller reduces start-up torque and bearing load. Backward-curved blades are selected for their non-overloading power characteristic, meaning the 790 W motor will not draw excessive current if system resistance falls below design, and for their higher static-pressure capability relative to forward-curved alternatives. The impeller is dynamically balanced after molding to control vibration and to keep the 84 dB(A) sound signature predictable in ducted installations. The die-cast aluminum endcap and housing form a rigid, corrosion-resistant structure that supports the rotor assembly, conducts motor heat to the airstream and maintains precise air-gap alignment over the service life. The drive motor is a BLDCEC102 electronically commutated brushless DC machine, a three-phase permanent-magnet design with integrated commutation electronics. Operating from a 380VAC three-phase supply with a minimum operating voltage of 304V, the motor draws 1.25 A and delivers 790 W at 2700 RPM. EC technology provides near-unity power factor and high part-load efficiency, so the fan consumes significantly less energy than an AC induction motor of equivalent output, particularly under the reduced-speed conditions typical of pressure-controlled filtration systems. Speed control is handled through the onboard EC interface, which accepts a 0-10V DC or PWM command signal for stepless adjustment from standstill to maximum speed and provides a tachometer output for verification of actual RPM. No external variable-frequency drive is required, eliminating drive cabinets, shielded motor cables and the harmonic distortion associated with VFDs. Electrical connection is made through a factory-fitted 18AWG cable, 1000 mm long, with conductors for supply, control and tachometer; the cable is sized for the 1.25 A current draw with margin and can be specified in alternative lengths or with connectors for OEM production. The motor winding system is designed for the insulation and dielectric strength required in industrial HVAC service, and the electronics are protected against overcurrent, overvoltage, locked-rotor and overtemperature conditions. Bearings are long-life, maintenance-free ball bearings selected for continuous duty at the 2700 RPM operating speed, with a service life matched to the expected operating hours of air-handling equipment. The fan carries CE and RoHS marks and is built in FANOVA's ISO 9001-certified facility, where each unit is routine-tested for balance, current draw, speed and dielectric strength before shipment. Typical applications include high-static-pressure HEPA and fine-filter systems, long-run ducted supply and exhaust in commercial buildings, cleanroom makeup air, battery energy-storage cabinet cooling, and industrial process ventilation where a single fan must overcome substantial system resistance. OEM/ODM options include alternative voltage and frequency variants, customized cable assemblies, control-signal configurations and branding for series production.

Nominal Date
AC Backward Curved Centrifugal Fan image.png
Type FB3G310-4APK-60
Model BLDCEC102

 

Nominal Voltage VAC 380
Voltage range VAC 304
Current draw A 1.25±10%
Speed(RPM) min-1  2700±5%
Power consumption W 790±10%
Sound Pressure Level dB(A) 84±5%
Max. Air Flow CFM / m3 /H 2354/4000
Max. Static Pressure In.wg /Pa 4.0/1000
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G310-4APK-60 delivers 4000 m3/h at 1000 Pa while drawing only 790W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 310mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 310mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000