Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G310-2APK-60 EC Backward Curved Centrifugal Fan 310mm 230V 4000 m3/h

FB3G310-2APK-60

Nominal Voltage VAC 230
Current draw A 3.25±10%
Speed(RPM) min-1  2640±5%
Power consumption W 740±10%
Max. Air Flow CFM / m3 /H 2354/4000
Max. Static Pressure In.wg /Pa 4.0/1000

50pcs

Brand:
FANOVA
Spu:
FB3G310-2APK-60
  • Overview
  • Recommended Products
Brief Description

When a single air mover must carry a high-volume, high-pressure duty on a standard 230 VAC supply, the FB3G310-2APK-60 is engineered to replace multiple smaller fans with one 310 mm backward-curved impeller. Delivering up to 4000 m3/h (2354 CFM) at a maximum static pressure of 1000 Pa (4.0 in. wg), it combines high airflow with the pressure head needed for long duct runs and dense filtration. The heart of the unit is a BLDCEC102 electronically commutated motor rated 740 W at 2640 RPM, drawing 3.25 A from a wide 184-270 VAC range so it rides through grid fluctuations without a separate transformer. Speed is commanded through a 0-10 VDC or PWM control interface, allowing precise balancing of airflow to actual demand and reducing energy use at part load. The impeller is molded from glass-fiber reinforced propylene, giving a lightweight yet stiff rotor that resists chemical attack and lowers starting inertia, while the die-cast aluminum endcap provides a rigid, corrosion-resistant motor mount. Electrical protection and insulation are built to Class F standards with thermal and locked-rotor safeguards, and the brushless motor's ball-bearing system is rated for 40,000 hours of continuous operation. Typical applications include HVAC air handling units, cleanroom recirculation, industrial exhaust, and ventilation skids in new-energy plants. The fan carries CE and RoHS certification and is manufactured under ISO 9001 quality control.

Product Specification

The FB3G310-2APK-60 is a backward-curved centrifugal fan built around a 310 mm diameter impeller molded from glass-fiber reinforced propylene. The plastic composite construction keeps rotating mass low, which shortens acceleration time and reduces bearing loads, while the glass-fiber reinforcement raises blade stiffness so the forward-leaning backward-curved blades hold their shape at 2640 RPM. The blade channel is optimized for a broad operating band, producing a maximum airflow of 4000 m3/h and a maximum static pressure of 1000 Pa at the free-delivery and shut-off extremes respectively. The rotor is directly driven by a BLDCEC102 outer-rotor electronically commutated motor with a 102 mm rotor diameter, eliminating belts and pulleys and the maintenance they require. The motor is rated 740 W at 230 VAC nominal, with an allowable supply window of 184 to 270 VAC and a nominal current of 3.25 A, so the fan can be applied on 200-240 VAC mains without a step-down transformer. Speed control is via a 0-10 VDC analog input or a PWM signal, with tachometer and alarm outputs available for building-management and DCIM integration. The die-cast aluminum endcap and housing provide a stiff, corrosion-resistant structure that also acts as a heat sink for the motor electronics. Electrical connection is made through a 1000 mm, 18 AWG cable, and the motor is protected against locked rotor, over-temperature and over-current conditions. Insulation is Class F, and the brushless ball-bearing system is rated for 40,000 hours at 40 degrees C, giving long service intervals in continuous-duty applications. Sound pressure at maximum speed is 84 dB(A), and the unit is certified to CE and RoHS and produced under an ISO 9001 quality system.

Nominal Date
AC Backward Curved Centrifugal Fan image.png
Type FB3G310-2APK-60
Model BLDCEC102

 

Nominal Voltage VAC 230
Voltage range VAC 184~270
Current draw A 3.25±10%
Speed(RPM) min-1  2640±5%
Power consumption W 740±10%
Sound Pressure Level dB(A) 84±5%
Max. Air Flow CFM / m3 /H 2354/4000
Max. Static Pressure In.wg /Pa 4.0/1000
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G310-2APK-60 delivers 4000 m3/h at 1000 Pa while drawing only 740W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 310mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 310mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000