FB3G310-2AAS-30
| Nominal Voltage | VAC | 230 |
| Current draw | A | 4.8±10% |
| Speed(RPM) | min-1 | 2900±5% |
| Power consumption | W | 1100±10% |
| Max. Air Flow | CFM / m3 /H | 3112.6/5289 |
| Max. Static Pressure | In.wg /Pa | 4.8/1200 |
50pcs
When a single 310 mm backward-curved impeller has to shoulder the duty of two or three smaller blowers, the FB3G310-2AAS-30 is the answer: at 230 VAC it delivers a maximum air flow of 3112.6 CFM (5289 m3H) while still pushing 4.8 In.wg (1200 Pa) of static pressure, so one fan can replace a parallel bank of units and free up cabinet space, wiring and maintenance time. The 1100 W BLDCEC137 electronically commutated motor spins the die-cast aluminum wheel to 2900 RPM at 4.8 A, and because it is EC-driven rather than a fixed-speed AC induction motor, the same impeller can be trimmed to the exact duty point instead of being throttled by a damper. This is also a genuinely high-pressure machine: 1200 Pa puts it in HEPA and long-duct territory, where ordinary axial fans stall, making it suitable for high-resistance filter banks, multi-outlet plenums, fume extraction and dense electronic-enclosure cooling. The impeller and endcap are both die-cast aluminum, giving a stiff, dimensionally stable rotor that tolerates continuous industrial duty and higher ambient temperatures better than molded plastic wheels, while the 137 mm rotor diameter carries the large bearing set needed for long service life at this power level. Speed is set through a 0-10 VDC/PWM control interface with tach output for status monitoring, and the fan runs from a 230 VAC supply across a 184 VAC minimum input range, so it can be dropped into existing AC installations without a step-down transformer. Electrical protection and insulation follow the usual EC fan regime, with locked-rotor, over-current and over-temperature safeguards built into the drive electronics. Typical applications include cleanroom and HEPA filter units, air handling units, industrial ventilation and extraction, telecom and energy-storage cabinet cooling, and process cooling in new energy equipment. The FB3G310-2AAS-30 carries CE and RoHS certification and is built under FANOVA's Suzhou quality system. For buyers who need one powerful, pressure-capable fan rather than several weak ones, this model is the economical choice.
The FB3G310-2AAS-30 is built around a 310 mm diameter backward-curved centrifugal impeller, a design chosen specifically because it converts rotational speed into pressure more efficiently than forward-curved or axial geometry. The wheel is die-cast from aluminum alloy in a single rigid piece, with a hub and a full set of backward-inclined blades that are self-cleaning in airflow terms and resistant to dust build-up on the leading edges. Cast rather than fabricated construction means blade angles and spacing repeat from unit to unit, so the published aerodynamic curve can be trusted when the fan is selected against a filter or duct resistance. A die-cast aluminum endcap and housing complete the air path, and the whole rotor assembly is balanced before assembly to keep vibration low at the 2900 RPM operating point. The impeller is directly driven by a BLDCEC137 outer-rotor brushless DC motor with a 137 mm rotor diameter, a size that provides the torque headroom to hold 2900 RPM against 1200 Pa of system pressure without speed droop. The motor is electronically commutated, which means the AC mains is rectified inside the drive and the rotor field is switched by power semiconductors; the result is a fan whose speed is independent of supply frequency and whose input power tracks the actual load rather than a fixed slip curve. Speed control is through a 0-10 VDC or PWM input, allowing the fan to be integrated into a building management system, a DCIM platform or a simple potentiometer, and a tachometer output reports actual RPM for verification and alarm logic. Electrical ratings are 230 VAC nominal with operation down to 184 VAC, 4.8 A maximum current and 1100 W input power, and the drive includes soft-start, over-current, locked-rotor and over-temperature protection. The motor insulation system is rated for the class of continuous industrial duty expected in HVAC and process cooling, and the electronics are housed to protect the PCB from the airstream. Bearings are long-life sealed ball bearings selected for the 137 mm rotor's radial load, with a service life target consistent with continuous 24/7 operation in air-handling equipment. The electrical interface is an 18AWG cable, 1000 mm long, with flying leads for mains, control and tach signals, simplifying field wiring without a terminal box. Acoustically the unit is rated at 84.8 dB(A) at full speed, which is typical for a fan of this power and pressure capability; where noise is a concern, the EC drive allows the fan to be slowed to the duty point, which reduces both sound power and energy consumption. The FB3G310-2AAS-30 is CE and RoHS compliant and is manufactured under FANOVA's Suzhou quality system with routine performance and safety testing. Target duties include HEPA and high-efficiency filtration, long-duct supply and exhaust, multi-outlet plenums, cleanroom air handling, industrial extraction, telecom and battery-cabinet cooling and new-energy process cooling.
| AC Backward Curved Centrifugal Fan | ![]() |
|
| Type | FB3G310-2AAS-30 | |
| Model | BLDCEC137 | |
| Nominal Voltage | VAC | 230 |
| Voltage range | VAC | 184 |
| Current draw | A | 4.8±10% |
| Speed(RPM) | min-1 | 2900±5% |
| Power consumption | W | 1100±10% |
| Sound Pressure Level | dB(A) | 84.8±5% |
| Max. Air Flow | CFM / m3 /H | 3112.6/5289 |
| Max. Static Pressure | In.wg /Pa | 4.8/1200 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FB3G310-2AAS-30 delivers 5289 m3/h at 1200 Pa while drawing only 1100W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 310mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 310mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.