Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G310-110AA-20L DC Backward Curved Centrifugal Fan 310mm 110V 81 m3/h

FB3G310-110AA-20L

Nominal Voltage VDC 110
Current draw A 4.4±10%
Speed(RPM) min-1  2600±5%
Power consumption W 124±10%
Max. Air Flow CFM / m3 /H 81
Max. Static Pressure In.wg /Pa 2257.5/3836

50pcs

Brand:
FANOVA
Spu:
FB3G310-110AA-20L
  • Overview
  • Recommended Products
Brief Description

When ductwork is long, filters are dense and pressure margins are tight, the FB3G310-110AA-20L answers with a pressure-first design: a 310 mm backward-curved aluminium impeller driven at 2600 RPM produces a maximum static pressure of 3836 Pa (15.1 in.wg) while still moving up to 81 CFM. That combination of ultra-high static pressure and a large impeller makes it a problem-solver for high-resistance air paths rather than a general-purpose circulator. The fan runs on 110VDC nominal with a wide 70-170VDC operating window, drawing 4.4 A and 124 W, so it can be tied directly to industrial DC microgrids and battery buses without an intermediate AC stage. The BLDCDC102 brushless DC motor is electronically commutated and speed-adjustable, allowing the duty point to be trimmed to the actual system resistance. Die-cast aluminium housing and aluminium-alloy impeller give the unit structural rigidity and heat tolerance; insulation and protection class are configured to the order specification, and bearing life is rated for long continuous duty. Typical installations include HEPA and multi-stage filtration cabinets, long-run extraction ducting, cleanroom pressure control and equipment cooling in new-energy and industrial plants. The model is CE and RoHS compliant and is produced under FANOVA's ISO 9001 quality system.

Product Specification

The FB3G310-110AA-20L is a 310 mm backward-curved centrifugal fan built around a pressure-optimised impeller and a high-voltage DC drive. The impeller is formed from aluminium alloy plate, with a blade count and curvature selected to convert rotational speed into static pressure efficiently; the backward-curved geometry keeps the power curve non-overloading, so a duct restriction or a dirty filter will not overload the motor. Each impeller is balanced before assembly, and the die-cast aluminium endcap and housing provide a stiff, dimensionally stable structure that holds the air gap and bearing alignment over the service life. The rotor diameter of 102 mm and the 310 mm impeller diameter together define a compact but high-pressure aerodynamic package. The motor, designated BLDCDC102, is a brushless DC (electronically commutated) machine. It is powered from a 110VDC nominal supply and accepts 70-170VDC, which suits industrial DC microgrids, rectified AC buses and battery systems where the voltage sags or rises with load. At rated conditions the fan draws 4.4 A and 124 W at 2600 RPM, delivering a maximum airflow of 81 CFM and a maximum static pressure of 3836 Pa (2257.5 in.wg). Speed is controlled electronically through the motor's commutation electronics, so the fan can be set to the exact duty point required by the duct system, reducing energy use and acoustic output when full pressure is not needed. Electrical connection is made through an 18AWG cable, 148 mm long, with terminations to the customer's specification. Bearings are selected for continuous industrial duty, with a rated life appropriate to the 2600 RPM operating point; the die-cast housing acts as a heat sink for the motor electronics. Protection and insulation class are configured per order. The fan is intended for HEPA and high-efficiency filtration, long duct runs, cleanroom and laboratory pressure control, and equipment cooling in new-energy and industrial applications. Units are CE and RoHS compliant and manufactured under FANOVA's ISO 9001 quality management system, with routine performance and balance checks on every production lot.

Nominal Date
DC Backward Curved Centrifugal Fan image.png
Type FB3G310-110AA-20L
Model BLDCDC102

 

Nominal Voltage VDC 110
Voltage range VDC 70~170
Current draw A 4.4±10%
Speed(RPM) min-1  2600±5%
Power consumption W 124±10%
Sound Pressure Level dB(A) 484±5%
Max. Air Flow CFM / m3 /H 81
Max. Static Pressure In.wg /Pa 2257.5/3836
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G310-110AA-20L delivers 81 m3/h at 3836 Pa while drawing only 124W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 310mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 310mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000