Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G225-24PL-70 DC Backward Curved Centrifugal Fan 225mm 24V 1300 m3/h

FB3G225-24PL-70

Nominal Voltage VDC 24
Current draw A 3.5±10%
Speed(RPM) min-1  2500±5%
Power consumption W 84±10%
Max. Air Flow CFM / m3 /H 765.05/1300
Max. Static Pressure In.wg /Pa 1.844/461

50pcs

Brand:
FANOVA
Spu:
FB3G225-24PL-70
  • Overview
  • Recommended Products
Brief Description

Think of the FB3G225-24PL-70 as a battery-first centrifugal blower: a 24VDC backward curved fan that draws only 84 W while still moving up to 765.05 CFM (1300 m3H) and developing 1.844 In.wg (461 Pa) of static pressure. Operating from a 16 to 28 VDC window, it is built for solar-charged battery banks, off-grid ventilation skids, telecom cabinets and mobile equipment where a safe extra-low voltage rail is the only power available. Its glass-fiber reinforced polypropylene impeller, 225 mm across and driven by the 72 mm rotor of the BLDCDC72 brushless DC motor, keeps rotating mass low, so the fan reaches 2500 RPM quietly at 68 dB(A) and starts smoothly on limited current. Speed is set by a 0-10V or PWM control signal, allowing airflow to be trimmed to actual demand instead of dumped through a damper. The motor is electronically commutated with integrated protection against over-current, over-voltage, locked rotor and reverse polarity, and insulation is rated for the low-voltage control environment. Dual ball bearings rated for 70,000 hours at 40 C carry the shaft, so maintenance intervals are measured in years. Typical duties include battery-room exhaust, container cooling, air purifiers, heat-pump condensers, EV charging enclosures and renewable-energy cabinets. The fan carries CE and RoHS compliance and is produced under ISO 9001 in FANOVA's Suzhou plant, with OEM cable lengths, connectors and labeling available. Its die-cast aluminum endcap adds stiffness and heat spreading without adding significant weight.

Product Specification

The FB3G225-24PL-70 belongs to FANOVA's backward curved centrifugal family and pairs a 225 mm impeller with a compact 72 mm BLDCDC72 brushless DC motor. The impeller is injection molded from glass-fiber reinforced polypropylene; the fiber loading raises tensile and creep resistance while keeping the part light, which lowers bearing loads and start-up inertia compared with a metal wheel of the same diameter. Its backward curved blade profile, produced to a controlled blade count and exit angle, converts rotational energy into pressure efficiently across a broad flow band, and the wheel is dynamically balanced in two planes before assembly to hold vibration low at the 2500 RPM design point. Airflow reaches 765.05 CFM (1300 m3H) at free delivery, and maximum static pressure is 1.844 In.wg (461 Pa), enough for duct runs, filters and louvers in compact equipment. The motor is a three-phase electronically commutated design with permanent-magnet rotor and integrated drive electronics; it draws 3.5 A at 24VDC nominal, accepts any supply from 16 to 28 VDC, and consumes 84 W at rated speed. Control is through a 0-10V analog input or a PWM duty signal, with tachometer feedback available for speed verification, so the blower can follow thermostat, CO2 or differential-pressure demand rather than running flat out. The drive includes soft start, over-current, over-voltage, under-voltage, locked-rotor and reverse-polarity protection, and the winding system is built for the low-voltage class with Class F insulation and a design that keeps surface temperatures modest. Mechanical support comes from two pre-lubricated ball bearings rated for approximately 70,000 hours at 40 C ambient; the shaft and bearing housing are machined to tight tolerance to control end play and axial runout. The rotating assembly is carried in a die-cast aluminum endcap that provides rigidity, damps resonance and spreads motor heat into the airstream. Electrical connection is by a 500 mm flying lead of 20AWG cable, with connector type, lead length and pinout configurable for OEM programs. Sound pressure at one meter is 68 dB(A) at rated speed, and the plastic wheel's smooth blade surfaces reduce the tonal content that metal impellers can produce. The fan is CE marked and RoHS compliant, and production follows ISO 9001 procedures with routine balancing, hipot and performance checks on every unit.

Nominal Date
DC Backward Curved Centrifugal Fan image.png
Type FB3G225-24PL-70
Model BLDCDC72

 

Nominal Voltage VDC 24
Voltage range VDC 16~28
Current draw A 3.5±10%
Speed(RPM) min-1  2500±5%
Power consumption W 84±10%
Sound Pressure Level dB(A) 68±5%
Max. Air Flow CFM / m3 /H 765.05/1300
Max. Static Pressure In.wg /Pa 1.844/461
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G225-24PL-70 delivers 1300 m3/h at 461 Pa while drawing only 84W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 225mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 225mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000