FB3G220-24PL-95
| Nominal Voltage | VDC | 24 |
| Current draw | A | 6.0±10% |
| Speed(RPM) | min-1 | 3500±5% |
| Power consumption | W | 144±10% |
| Max. Air Flow | CFM / m3 /H | 733.57/1246.5 |
| Max. Static Pressure | In.wg /Pa | 3.6/900 |
50pcs
When a project needs serious pressure inside a low-voltage envelope, the FB3G220-24PL-95 backward curved centrifugal fan is engineered to deliver it without compromise. This unit generates up to 3.6 in.wg (900 Pa) of static pressure at a 220 mm impeller diameter, letting it push air through long ducts, dense filter banks and multi-outlet plenums where lesser blowers simply stall. The 24VDC platform (16 to 28 V operating range) keeps the entire air path in the safety extra-low voltage class, so it is a natural fit for solar arrays, battery cabinets, off-grid telecom shelters and any installation where a mains feed is impractical or hazardous. Power draw is 144 W at 6.0 A, with a free-air flow ceiling of 1246.5 m3/h (733.57 CFM) and a 3500 RPM shaft speed that balances pressure head against acoustic output. The fan is driven by a BLDCDC92 brushless DC motor with integrated electronic commutation, giving smooth stepless speed regulation through a 0-10V or PWM control input and eliminating the brush maintenance that plagues conventional DC motors. The backward curved impeller is molded from glass-fiber reinforced propylene, a formulation chosen for its low mass moment of inertia, chemical resistance and freedom from the corrosion and fatigue cracking that can affect metal wheels in humid or mildly aggressive air. Insulation is Class F with a Class B rise limit, and the motor carries thermal and locked-rotor protection as standard. Dual ball bearings rated for 40,000 hours of continuous duty keep maintenance intervals long and bearing noise low. Typical applications include electronics enclosure cooling, heat recovery ventilators, cleanroom pressure control, EV charging cabinet ventilation and rooftop air-handling units. The fan is CE and RoHS compliant and is produced under a quality system aligned with ISO 9001. Acoustic output is 74 dB(A) at maximum speed, and because the backward curved blade profile is inherently more efficient than forward curved alternatives, the fan sustains its pressure curve across a broad flow band rather than collapsing at the first sign of system resistance. For designers weighing a single high-pressure 24VDC blower against a bank of smaller axial fans, the FB3G220-24PL-95 offers a cleaner, quieter and more controllable answer.
The FB3G220-24PL-95 is built around a 220 mm diameter backward curved centrifugal impeller injection-molded from glass-fiber reinforced propylene. The wheel carries a dense array of curved, backward-leaning blades that accelerate air radially and discharge it at high velocity into the volute, converting dynamic pressure into the static head that long duct runs demand. Glass-fiber loading raises the tensile and creep resistance of the propylene so that blade tips hold their shape at 3500 RPM without the permanent set that unreinforced thermoplastic can suffer in warm airstreams. The impeller is dynamically balanced at the factory to a fine grade, which suppresses the once-per-revolution vibration that would otherwise excite panel resonances and shorten bearing life. The die-cast aluminum endcap and housing form a rigid structure that absorbs motor torque reaction, damps the blade-passing tone and provides a stable mounting datum with four fastening points. Because the housing is aluminum rather than steel, the fan resists galvanic corrosion in coastal and humid installations and sheds heat from the motor windings more effectively. At the heart of the unit is the BLDCDC92 brushless DC motor, a 92 mm rotor diameter outrunner-style machine with surface-mounted permanent magnets and an integrated commutation board. Electronic commutation replaces brushes and commutator, removing the dominant wear item of conventional DC motors and allowing the fan to operate at any speed between idle and its 3500 RPM ceiling. The drive accepts a 0-10V analog signal or a PWM duty-cycle input for stepless speed setting, and a tachometer output is available for closed-loop monitoring by a building controller or DCIM platform. Electrical ratings are 24VDC nominal with an operating window of 16 to 28 V, 6.0 A maximum current and 144 W input power, making the fan tolerant of the voltage sag that battery-backed and solar-fed supplies experience under load. The motor is wound with Class F insulation and limited to a Class B temperature rise, leaving a wide thermal margin for continuous duty in elevated ambient conditions. Over-temperature and locked-rotor protection are built into the control electronics so that a jammed impeller will not destroy the winding. Mechanical support comes from a pair of pre-lubricated ball bearings selected for 40,000 hours of L10 life at rated conditions; the bearing pair is spring-preloaded to eliminate axial play and to keep running noise and vibration low across the speed range. Shaft sealing and a controlled bearing-bore fit prevent grease migration onto the impeller. The electrical interface is a 500 mm flying lead of 20 AWG wire, color-coded for power, ground, control and tachometer, with the cable exit oriented for straightforward routing into a terminal box or connector. The 20 AWG gauge is rated for the 6.0 A maximum current with margin for voltage drop over the standard lead length. Acoustically the fan measures 74 dB(A) at full speed, and because the backward curved profile maintains a gently rising pressure characteristic, the unit can often be slowed by 20 to 30 percent with a modest loss of flow but a disproportionate reduction in sound power. Air performance peaks at 1246.5 m3/h (733.57 CFM) free delivery and 900 Pa (3.6 in.wg) shutoff, with the useful operating band concentrated in the middle of the curve where system resistance and fan pressure intersect efficiently. Quality control covers impeller balance, hipot and insulation-resistance testing of every motor, a burn-in run at rated voltage for each assembly and a final performance spot check against the published curve. The product is CE marked and RoHS compliant, and manufacturing follows an ISO 9001 registered quality system. A range of accessories, including mounting brackets, inlet rings, finger guards and mating cable connectors, supports drop-in integration into OEM air-handling and enclosure-cooling designs.
| DC Backward Curved Centrifugal Fan | ![]() |
|
| Type | FB3G220-24PL-95 | |
| Model | BLDCDC92 | |
| Nominal Voltage | VDC | 24 |
| Voltage range | VDC | 16~28 |
| Current draw | A | 6.0±10% |
| Speed(RPM) | min-1 | 3500±5% |
| Power consumption | W | 144±10% |
| Sound Pressure Level | dB(A) | 74±5% |
| Max. Air Flow | CFM / m3 /H | 733.57/1246.5 |
| Max. Static Pressure | In.wg /Pa | 3.6/900 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FB3G220-24PL-95 delivers 1246.5 m3/h at 900 Pa while drawing only 144W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 220mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 220mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.