Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G175-2ALH-70 EC Backward Curved Centrifugal Fan 175mm 230V 798 m3/h

FB3G175-2ALH-70

Nominal Voltage VAC 230
Current draw A 0.8±10%
Speed(RPM) min-1  4000±5%
Power consumption W 101±10%
Max. Air Flow CFM / m3 /H 469.8/798.3
Max. Static Pressure In.wg /Pa 2.7/675

50pcs

Brand:
FANOVA
Spu:
FB3G175-2ALH-70
  • Overview
  • Recommended Products
Brief Description

The FB3G175-2ALH-70 is a 230VAC EC backward curved centrifugal fan built for OEMs who need an AC mains drop-in that slashes energy bills without rewiring the cabinet. It runs from a wide 184~277 VAC input range, so one SKU covers nominal 230V grids plus the brownout and surge excursions common in factory and rooftop installations. At 4000 RPM the 175 mm impeller delivers up to 798.3 m3H (469.8 CFM) against 675 Pa (2.7 In.wg) static pressure, drawing just 101 W and 0.8 A, a combination that lets a single EC fan replace two fixed-speed AC units in many medium-pressure air paths. The BLDCEC72 electronically commutated motor integrates drive electronics on board, giving 0-10V and PWM speed control, soft start and locked-rotor protection as standard instead of as add-ons. The impeller is molded from glass-fiber reinforced propylene, a lightweight, chemically resistant and dimensionally stable composite that keeps rotating mass low at 4000 RPM and resists moisture, mild acids and cleaning agents better than untreated plastics. The die-cast aluminum endcap and housing give the rotating assembly a rigid, thermally stable cradle that also acts as a heat spreader for the drive. Insulation is Class B with Class F magnet wire, and the fan carries CE and RoHS compliance with UL-recognized components on request. Bearing life is rated at 40,000 hours L10 at 40 degrees C ambient, and the 20AWG, 500 mm flying lead keeps harness work simple. Typical applications include AHU plug fans, VAV boxes, fume hoods, telecom cabinets, EV charger cooling and heat pump condensers. Also available in the family: 24VDC and 48VDC variants for DC bus systems.

Product Specification

The FB3G175-2ALH-70 sits in FANOVA's FB3G175 backward curved centrifugal family, which shares a 175 mm nominal impeller diameter but differs by motor platform and voltage class. This variant pairs the plastic composite impeller with the BLDCEC72 EC motor, making it the mains-powered member of the group rather than a DC-bus unit. The impeller is injection molded from glass-fiber reinforced propylene. The composite is selected for its high strength-to-weight ratio, its resistance to moisture and dilute chemical attack, and its low thermal expansion, which keeps tip clearance stable across the operating temperature range. The wheel uses a backward-curved blade form optimized for a steep pressure-flow characteristic, so the fan holds pressure well as downstream filters load up. The die-cast aluminum endcap closes the motor side and doubles as a structural hub and heat path for the integrated electronics. The BLDCEC72 motor is a three-phase permanent magnet synchronous machine with an on-board inverter, sinusoidal commutation and sensorless rotor position feedback. Its speed range is adjustable from roughly 300 RPM to the 4000 RPM maximum, and the control interface accepts a 0-10 VDC analog signal or a 25 kHz PWM duty input, with tach output and alarm output available on the flying lead. Electrical ratings are 184~277 VAC, 50/60 Hz, 0.8 A maximum at 230 VAC, 101 W input power at maximum speed, and power factor correction is integrated to meet harmonic limits for lighting-class and appliance-class loads. The fan includes inrush limiting, over-voltage and under-voltage lockout, over-temperature foldback and locked-rotor shutdown with automatic restart. The rotor is dynamically balanced to ISO 1940 G6.3 at the factory, and the shaft runs in sealed, pre-lubricated ball bearings rated for 40,000 hours L10 at 40 degrees C; the bearing pair is spring-preloaded to suppress axial play and reduce tonal noise. Acoustic output is 79.1 dB(A) at maximum speed, measured at one meter on the intake side in free-field conditions; running at reduced speed via the control input drops sound pressure substantially. The electrical interface is a 500 mm flying lead of 20AWG UL1007-equivalent wire, with separate conductors for line, neutral, ground, control input, tach and alarm. The fan is CE marked, RoHS compliant and built in an ISO 9001 facility; UL and cUL recognition of the motor and insulation system can be supplied for North American projects. Operating ambient is -20 to +60 degrees C with derating above 40 degrees C. Mounting is via the die-cast aluminum flange with four M4 holes on a 92 mm bolt circle, and the unit can be installed in any orientation. Weight is approximately 1.6 kg. Typical uses include air handling units, VAV terminal boxes, laboratory fume hoods, telecom and IT enclosures, EV charger thermal management, heat pump condensers, and industrial drying and process air. FANOVA supplies the FB3G175-2ALH-70 as an OEM/ODM platform with custom cable lengths, connector types, speed setpoints, labeling and packaging available on request.

Nominal Date
AC Backward Curved Centrifugal Fan image.png
Type FB3G175-2ALH-70
Model BLDCEC72

 

Nominal Voltage VAC 230
Voltage range VAC 184~277
Current draw A 0.8±10%
Speed(RPM) min-1  4000±5%
Power consumption W 101±10%
Sound Pressure Level dB(A) 79.1±5%
Max. Air Flow CFM / m3 /H 469.8/798.3
Max. Static Pressure In.wg /Pa 2.7/675
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G175-2ALH-70 delivers 798.3 m3/h at 675 Pa while drawing only 101W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 175mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 175mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000