Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G133-24PL-71 DC Backward Curved Centrifugal Fan 133mm 24V 495 m3/h

FB3G133-24PL-71

Nominal Voltage VDC 24
Current draw A 1.9±10%
Speed(RPM) min-1  4460±5%
Power consumption W 45.6±10%
Max. Air Flow CFM / m3 /H 291.3/495
Max. Static Pressure In.wg /Pa 1.87/468

50pcs

Brand:
FANOVA
Spu:
FB3G133-24PL-71
  • Overview
  • Recommended Products
Brief Description

Engineered for solar arrays, battery cabinets and off-grid equipment, the FB3G133-24PL-71 is a 24VDC backward curved centrifugal fan that proves you do not need mains power to move serious air. Operating across a 16 to 28VDC window, it draws only 1.9 A and 45.6 W while its 133 mm impeller delivers up to 291.3 CFM (495 m3/h) and 1.87 In.wg (468 Pa) of static pressure at 4460 RPM. The heart of the unit is the BLDCDC72 brushless DC motor with integrated commutation electronics, giving smooth continuous speed regulation through the control interface rather than crude on/off switching. Electrical safety is built in through the low 24VDC rail itself, while the motor carries Class B insulation and reverse-polarity and locked-rotor protection to survive field wiring errors. A 20AWG, 500 mm flying lead with a molded connector simplifies drop-in replacement in retrofit cabinets. Life is rated at 40,000 hours L10 at 40 degrees C, enough for years of continuous duty in telecom shelters or inverter enclosures, and acoustic output is held to 73 dB(A). Typical applications include photovoltaic combiner boxes, energy storage racks, EV charger housings, LED luminaires and compact air-handling units. CE and RoHS compliance, together with ISO 9001 controlled production, backs every unit leaving the FANOVA plant.

Product Specification

The impeller of the FB3G133-24PL-71 is molded in glass-fiber reinforced polypropylene, a material chosen for its low mass, chemical resistance and dimensional stability under the continuous centrifugal loading of 4460 RPM operation. Seven backward-curved blades are set at an outlet angle that trades a small amount of peak airflow for a rising pressure characteristic, so the fan holds its duty point when a filter loads or a duct run is extended. The 133 mm diameter rotor is dynamically balanced to ISO 1940 G6.3 before assembly, and the whole impeller weighs a fraction of an equivalent steel wheel, which keeps start-up current low and bearing loads modest. The die-cast aluminum endcap and housing form a rigid, thermally conductive structure that carries the motor heat away from the windings; the rotor measures 72 mm in diameter. Motor technology is the BLDCDC72 brushless DC platform, using Hall-effect commutation and a three-phase inverter stage integrated into the hub. It accepts any supply between 16 and 28VDC and self-regulates to a stable 4460 RPM, with a typical current draw of 1.9 A and input power of 45.6 W at nominal 24VDC. Speed control is available through a PWM or 0-10VDC interface on the control lead, allowing the airflow to be trimmed to the thermal load and the input power to fall at part speed. Electrical protection includes locked-rotor current limiting, reverse-polarity tolerance and thermal shutdown, so a miswired connector or a jammed impeller will not destroy the electronics. Insulation is Class B, the winding is vacuum-impregnated against vibration and moisture, and the electrical interface is a 500 mm, 20AWG flying lead with a molded plug for fast field connection. The motor runs in sealed ball bearings with a calculated L10 life of 40,000 hours at 40 degrees C, and the fan may be mounted in any orientation. Acoustic output is 73 dB(A) at maximum speed and falls quickly as the PWM duty cycle is reduced. Every unit is hipot tested, burned in and acoustically sampled before packing, and production follows ISO 9001 with CE and RoHS declarations supplied on request. With a mass of roughly 0.9 kg and an operating range of -20 to +60 degrees C, the FB3G133-24PL-71 is a compact, low-voltage air-moving solution for photovoltaic, storage, telecom and transport equipment.

Nominal Date
DC Backward Curved Centrifugal Fan image.png
Type FB3G133-24PL-71
Model BLDCDC72

 

Nominal Voltage VDC 24
Voltage range VDC 16~28
Current draw A 1.9±10%
Speed(RPM) min-1  4460±5%
Power consumption W 45.6±10%
Sound Pressure Level dB(A) 73±5%
Max. Air Flow CFM / m3 /H 291.3/495
Max. Static Pressure In.wg /Pa 1.87/468
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G133-24PL-71 delivers 495 m3/h at 468 Pa while drawing only 45.6W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 133mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 133mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000