Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FK3G220-24PL-92 DC Plug Fan 220mm 24V 980 m3/h

FK3G220-24PL-92

Nominal Voltage VDC 24
Current draw A 3.3±10%
Speed(RPM) min-1  2760±5%
Power consumption W 80±10%
Max. Air Flow CFM / m3 /H 577.02/980.5
Max. Static Pressure In.wg /Pa 1.94/485

50pcs

Brand:
FANOVA
Spu:
FK3G220-24PL-92
  • Overview
  • Recommended Products
Brief Description

The FK3G220-24PL-92 is a 24VDC backward-curved centrifugal plug fan that redefines low-voltage air moving: it consumes just 80 W while delivering up to 980.5 m3/h (577.02 CFM) of airflow and 485 Pa (1.94 in.wg) of static pressure. At its heart is a 220 mm glass-fiber reinforced propylene impeller, a lightweight yet chemically resistant wheel that shrugs off moisture, salts and many industrial vapors without the mass penalty of metal. The BLDCDC92 brushless DC motor operates from a 16-28 VDC bus at 3.3 A and spins at 2760 RPM, making the fan a natural fit for solar arrays, battery cabinets, off-grid telecom huts and 24 VDC energy-storage systems where safety extra-low voltage is mandatory. Speed is commanded through a 0-10 V analog interface or PWM input, so airflow can be trimmed precisely to thermal demand, and the die-cast aluminum endcap provides a rigid, corrosion-tolerant mounting platform with excellent heat spreading for the drive electronics. Electrical protection includes locked-rotor and over-current shutdown, reverse-polarity tolerance and Class B insulation, while the dual ball-bearing system is rated for 70,000 hours at 40 degrees C, giving years of maintenance-free duty. With a sound pressure level of 71.4 dB(A) and a compact 220 mm frame, it slots neatly into air handlers, EV charger enclosures, dehumidifiers and laboratory exhaust boxes. The fan carries CE and RoHS marks and is manufactured under ISO 9001, with FANOVA offering full OEM/ODM customization of cable length, connector and control firmware.

Product Specification

The FK3G220-24PL-92 belongs to FANOVA's FK3G series of backward-curved centrifugal plug fans and is engineered around a 220 mm impeller molded from glass-fiber reinforced propylene. The wheel uses a backward-curved blade profile with a high blade count that is optimized for a steep pressure-flow characteristic, allowing the fan to hold 485 Pa of static pressure at free delivery and to remain stable when pushing air through dense filter media, long duct runs or narrow heat-exchanger fins. Glass-fiber loading raises the tensile and creep resistance of the propylene, so the impeller retains its blade geometry at 2760 RPM without the weight, cost or galvanic corrosion risk of a steel wheel, and the material resists dilute acids, alkalis and washdown humidity. The rotor is dynamically balanced to ISO 1940 G6.3 before assembly, keeping vibration low and bearing loads even. Driving the wheel is a BLDCDC92 brushless DC motor with an integrated commutation and power stage. The motor accepts a wide 16 to 28 VDC input, draws 3.3 A at nominal 24 V and produces 80 W of shaft power, a combination that suits battery-backed and solar-direct installations where the bus voltage sags under load or rises during equalize charging. Speed is set by a 0-10 VDC analog signal or a 25 kHz PWM input, with a tachometer output available for closed-loop verification; the control electronics include soft-start, locked-rotor protection, over-current and over-temperature shutdown, and reverse-polarity tolerance. Insulation is Class B, the winding is vacuum-impregnated, and the leads are a 500 mm 20AWG cable that can be terminated with Molex, JST or flying leads to customer print. Mechanically, the fan is carried in a die-cast aluminum endcap that doubles as the motor heat sink and as a stiff mounting flange; the endcap is machined after casting so the rotor air gap stays concentric, and it is finished for indoor and sheltered outdoor service. The shaft runs in two pre-lubricated ball bearings rated for 70,000 hours L10 life at 40 degrees C ambient, and the bearing cavities are shielded to keep out dust. The complete assembly weighs approximately 1.2 kg, mounts in any orientation, and produces 71.4 dB(A) sound pressure at one meter. Every unit is hipot tested at 500 VAC, run-in for two hours at rated speed, and checked for balance and current draw before packing; the series is CE and RoHS compliant and built in an ISO 9001 facility with full traceability. Typical applications include 24 VDC energy-storage cabinet cooling, solar inverter and combiner-box ventilation, EV charging station thermal management, telecom outdoor enclosures, dehumidifier and air-handler blower decks, and laboratory fume extraction where extra-low voltage is required.

Nominal Date
DC Plug Fan 57.jpg
Type FK3G220-24PL-92
Model BLDCDC92

 

Nominal Voltage VDC 24
Voltage range VDC 16~28
Current draw A 3.3±10%
Speed(RPM) min-1  2760±5%
Power consumption W 80±10%
Sound Pressure Level dB(A) 71.4±5%
Max. Air Flow CFM / m3 /H 577.02/980.5
Max. Static Pressure In.wg /Pa 1.94/485
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FK3G220-24PL-92 delivers 980.5 m3/h at 485 Pa while drawing only 80W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 220mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 220mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000