FB3G250-2AAY-30
| Nominal Voltage | VAC | 230 |
| Current draw | A | 3.3±10% |
| Speed(RPM) | min-1 | 3000±5% |
| Power consumption | W | 750±10% |
| Max. Air Flow | CFM / m3 /H | 2018.56/3430 |
| Max. Static Pressure | In.wg /Pa | 4.31/1077 |
50pcs
When a single ventilation point has to move more than 3400 m3/h against a filter bank that refuses to give up pressure, the FB3G250-2AAY-30 answers with a rare combination: 2018.56 CFM of free delivery and 4.31 In.wg (1077 Pa) of static pressure from one 250 mm backward curved impeller. That dual capability lets one FB3G250-2AAY-30 replace two or three smaller fans in a ducted cabinet or AHU, cutting the number of wall penetrations, wiring drops and service points in the system. The fan runs from 230VAC mains anywhere in the 184 to 270 V band, drawing 3.3 A and 750 W at 3000 RPM, and the BLDCEC137 electronically commutated motor converts that input directly - no external transformer, no VFD, no phase-balancing concerns. Speed is commanded over the standard EC control interface, so airflow can be trimmed to the actual resistance of the installed ductwork rather than fixed at a single design point. Class F insulation and integrated protection circuitry guard the winding through voltage sags and starts, while the dual-ball bearing set is rated for continuous industrial duty. The die-cast aluminum impeller and matching aluminum endcap resist heat and corrosion and hold blade geometry at 3000 RPM far longer than molded alternatives. At 87 dB(A) the unit is intended for plant rooms, rooftop packages, telecom cabinets and new-energy thermal management enclosures rather than occupied spaces. CE and RoHS compliance, 18AWG cable with a 1000 mm lead, and FANOVA's OEM/ODM customization complete the package.
The FB3G250-2AAY-30 is built around a 250 mm diameter backward curved centrifugal impeller die-cast in aluminum as a single rigid component. The blade set is profiled for non-overloading power behavior: as system resistance rises toward the 1077 Pa maximum static pressure, the motor does not run away in current, which is what allows the same fan to be specified either for high-flow ducted supply or for high-differential filter service. The aluminum endcap is machined to locate the inlet ring concentrically with the impeller, keeping tip clearance small and stable across the operating temperature range; this is the detail that separates a die-cast aluminum platform from sheet-metal or polymer housings when the fan is run at 3000 RPM for years. The rotor measures 137 mm and is balanced as an assembly before final test. Drive comes from the BLDCEC137 outer-rotor EC motor, a three-phase brushless design with integrated commutation electronics mounted in the airflow path for direct cooling of the power stage. Input is 230VAC nominal with full operation from 184 to 270 V, 3.3 A maximum, and 750 W shaft power at 3000 RPM; power factor correction is built into the drive so the fan presents a clean load to the mains. Speed control uses the standard EC interface - a 0-10 VDC analog signal, PWM input or onboard potentiometer depending on configuration - and the same terminal block provides tachometer output and fault indication for BMS or DCIM integration. Electrical protection includes soft start, locked-rotor and over-temperature shutdown, and Class F insulation on the winding for a thermal margin suited to enclosed cabinets. The motor rides on dual ball bearings selected for horizontal or vertical mounting, with a calculated L10 life well beyond 40,000 hours at rated conditions and sealed-for-life lubrication that removes relubrication from the maintenance schedule. The electrical interface is an 18AWG cable with a 1000 mm flying lead, polarized for correct mains connection; custom lengths and connectors are available for OEM volumes. Every unit is hipot tested, run-in and checked for current, speed and vibration before packing, and the platform is manufactured under a quality system consistent with CE and RoHS requirements. Typical installations include air handling units, cleanroom filter-fan units, EV charger and inverter cooling, battery energy storage thermal loops, and industrial exhaust where a compact 250 mm footprint must deliver more than 3400 m3/h. FANOVA (Suzhou Xinhengxin Air-conditioning & Refrigeration) supplies the FB3G250-2AAY-30 as an OEM/ODM product with customizable voltage windows, cable assemblies and control profiles.
| AC Backward Curved Centrifugal Fan | ![]() |
|
| Type | FB3G250-2AAY-30 | |
| Model | BLDCEC137 | |
| Nominal Voltage | VAC | 230 |
| Voltage range | VAC | 184~270 |
| Current draw | A | 3.3±10% |
| Speed(RPM) | min-1 | 3000±5% |
| Power consumption | W | 750±10% |
| Sound Pressure Level | dB(A) | 87±5% |
| Max. Air Flow | CFM / m3 /H | 2018.56/3430 |
| Max. Static Pressure | In.wg /Pa | 4.31/1077 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FB3G250-2AAY-30 delivers 3430 m3/h at 1077 Pa while drawing only 750W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 250mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 250mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.