FG3G400-2AGL-20
| Nominal Voltage | VAC | 230 |
| Current draw | A | 2.18±10% |
| Speed(RPM) | min-1 | 2150±5% |
| Power consumption | W | 480±10% |
| Max. Air Flow | CFM / m3 /H | 3660.4/6219.8 |
| Max. Static Pressure | In.wg /Pa | 1.32/329 |
50pcs
Replace a bank of smaller AC fans with a single high-output unit: the FG3G400-2AGL-20 axial fan moves up to 6219.8 m3/h (3660.4 CFM) from one 400 mm impeller, so cabinet layouts get simpler, wiring counts drop and maintenance points shrink. It is a 230VAC electronically commutated fan accepting a wide 184 to 270VAC input, drawing 2.18 A and 480 W at 2150 RPM to develop 1.32 in.wg (329 Pa) of static pressure against real system impedance. The impeller is built from cold-rolled steel plate rather than molded plastic, giving the blades rigidity and wear resistance where hot, dusty or slightly abrasive airstreams are normal, while the die-cast aluminum endcap and housing carry the motor and hold alignment under continuous duty. A BLDCEC102 brushless DC motor with integrated EC102 electronics delivers the airflow, with 0-10V analog or PWM speed control available so airflow can be trimmed to actual load instead of running flat out. Protection and insulation are designed for industrial panels, and the ball-bearing system is rated for long L10 life at elevated ambient. Typical installations include HVAC air handling units, condenser and cooling tower banks, telecom and switchgear enclosures, drying ovens and general factory ventilation. CE and RoHS compliance support export projects, and FANOVA supplies the series as an OEM/ODM partner with customizable lead lengths and connectors.
The FG3G400-2AGL-20 is a 400 mm axial fan in FANOVA's EC axial range, engineered around a cold-rolled steel plate impeller. Steel blades are stamped, formed and balanced as a set, which produces a stiffer blade profile than injection-molded alternatives and keeps tip clearance stable when the fan is mounted in a vibrating duct or machine frame. The impeller is dynamically balanced after assembly to control vibration and bearing load at the 2150 RPM design point. Airflow reaches 6219.8 m3/h (3660.4 CFM) at free delivery and static pressure peaks at 329 Pa (1.32 in.wg), a combination suited to medium-resistance duct runs, filter banks and multi-outlet plenums where a single large fan is preferred over several small ones. The die-cast aluminum endcap and housing dissipate motor heat and provide a rigid mounting interface; the 102 mm rotor diameter sets the motor's torque density and allows the fan to hold speed as system resistance rises. The BLDCEC102 motor is a brushless DC design with integrated EC102 commutation electronics, operating from 230VAC nominal with a 184 to 270VAC tolerance so it rides through supply sag and overvoltage without dropping out. Input current is 2.18 A and shaft power 480 W, giving this model the headroom for continuous heavy-duty operation in warm enclosures. Speed is adjustable through a 0-10V analog input or a PWM signal, and the electronics include soft-start, locked-rotor and over-temperature protection; a tachometer output is available for monitoring. Insulation is Class F with a dielectric strength tested to standard requirements, and the winding system is designed for inverter-grade voltage stress. The bearing arrangement uses preloaded ball bearings with long L10 life at rated temperature, and the shaft is supported to limit end play under axial thrust. Electrical connection is via a 500 mm 18AWG cable, with connector type and lead length configurable for OEM programs. Acoustic output is 69.5 dB(A) at the rated point. The fan is CE and RoHS compliant and is produced under ISO 9001 quality management, with routine hipot, balance and performance testing on every batch. FANOVA offers ODM engineering for voltage, speed curve, cable and mounting variants, making the FG3G400-2AGL-20 a platform for OEM air-moving programs.
| AC Axial Fan | ![]() |
|
| Type | FG3G400-2AGL-20 | |
| Model | BLDCEC102 | |
| Nominal Voltage | VAC | 230 |
| Voltage range | VAC | 184~270 |
| Current draw | A | 2.18±10% |
| Speed(RPM) | min-1 | 2150±5% |
| Power consumption | W | 480±10% |
| Sound Pressure Level | dB(A) | 69.5±5% |
| Max. Air Flow | CFM / m3 /H | 3660.4/6219.8 |
| Max. Static Pressure | In.wg /Pa | 1.32/329 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FG3G400-2AGL-20 delivers 6219.8 m3/h at 329 Pa while drawing only 480W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 400mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 400mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.