Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G190-2AGL-90 EC Backward Curved Centrifugal Fan 190mm 230V 1236 m3/h

FB3G190-2AGL-90

Nominal Voltage VAC 230
Current draw A 1.2±10%
Speed(RPM) min-1  4000±5%
Power consumption W 155±10%
Max. Air Flow CFM / m3 /H 727.5/1236.2
Max. Static Pressure In.wg /Pa 2.96/740

50pcs

Brand:
FANOVA
Spu:
FB3G190-2AGL-90
  • Overview
  • Recommended Products
Brief Description

When ductwork is long, filters are dense and static resistance climbs past 700 Pa, the FB3G190-2AGL-90 keeps delivering instead of fading. This 230VAC backward curved centrifugal fan is built around a high-pressure 190 mm impeller that reaches 2.96 in.wg (740 Pa) while still moving up to 727.5 CFM (1236.2 m3H), so one compact unit can replace a pair of lower-pressure fans in cramped air handlers. The impeller is formed from galvanized steel sheet, giving the blades the stiffness to hold their shape under continuous high-static duty and the corrosion resistance to survive humid, slightly aggressive airstreams. A BLDCEC92 electronically commutated motor spins the wheel to 4000 RPM at just 155 W and 1.2 A, and because the drive is integrated, the fan accepts any supply from 184 to 277 VAC without a step-down transformer. Speed is set by a 0-10 VDC or PWM control signal, so building management systems can trim airflow to actual demand rather than running flat out. Class F insulation and locked-rotor, over-voltage and over-temperature protection keep the motor safe in unattended rooftop and plant-room installations, while the 20AWG, 112 mm cable simplifies field wiring. Typical applications include high-resistance HEPA and bag filter banks, long-duct exhaust in laboratories, dense coil air handlers, cleanroom pressurization and industrial ventilation skids. The FB3G190-2AGL-90 carries CE and RoHS compliance and is produced under FANOVA's ISO 9001 quality system, with options for UL-recognized components on request.

Product Specification

The FB3G190-2AGL-90 is a backward curved centrifugal fan from FANOVA's FB3G190 series, engineered for systems where static pressure, not free air, is the limiting design factor. Its impeller measures 190 mm in diameter and is fabricated from galvanized steel sheet. The blades are formed and welded into a backward curved profile that resists deflection at 4000 RPM, maintaining a stable pressure characteristic even as downstream filters load. Galvanized construction also provides a zinc-rich surface barrier against condensation and mildly corrosive process air, making the wheel suitable for humid climates and light industrial exhaust. The impeller is dynamically balanced to ISO 1940 G6.3 after assembly, which limits vibration and bearing wear over the fan's service life.

Air performance is rated at a maximum flow of 727.5 CFM (1236.2 m3H) and a maximum static pressure of 2.96 in.wg (740 Pa). The steep backward curved curve means the fan holds pressure well into the upper flow range, an advantage in long-duct runs, multi-outlet manifolds and high-efficiency particulate air filter banks where conventional forward curved wheels stall. The fan is driven by a BLDCEC92 electronically commutated motor with a 92 mm rotor diameter, integrating the rotor, stator, power electronics and control circuitry in a single sealed package. Input is 230VAC nominal with a full operating window of 184 to 277 VAC, drawing 1.2 A and 155 W at rated speed, so the same model can be specified for 200-240 V markets and 277 V commercial lighting circuits alike.

Speed control is through a 0-10 VDC analog input or a PWM signal, both referenced to the motor's internal ground, allowing stepless modulation from standstill to 4000 RPM. A tachometer output provides speed feedback for closed-loop building management control. The motor is Class F insulated and protected against locked rotor, over-voltage, under-voltage and over-temperature; on loss of the control signal the fan can be configured to run at full speed or stop, depending on the safety strategy of the installation. Electrical connection is made through a 20AWG cable, 112 mm in length, exiting the die-cast aluminum endcap, which also acts as the motor heat sink and provides a rigid mounting interface for the fan housing.

Bearings are pre-lubricated ball bearings selected for a minimum L10 life of 40,000 hours at 40 degrees C ambient, with the rotor balanced to keep axial and radial loads low. The die-cast aluminum housing and endcap resist corrosion and dissipate motor heat, while the steel impeller is isolated from the electronics by a sealed shaft passage. The fan is designed for panel or bracket mounting in any orientation and is tested for continuous duty at ambient temperatures up to 60 degrees C with derating above 40 degrees C. Acoustic output is 73 dB(A) at maximum speed, measured at one meter in free field; sound power and octave-band data are available on request for duct-borne noise calculations.

All units are manufactured in FANOVA's Suzhou plant under an ISO 9001 quality management system and are CE and RoHS compliant, with UL-recognized insulation system components available for North American projects. Each fan is routine-tested for hipot, insulation resistance, speed and current before packing, and a 100 percent run-in of at least 30 minutes is performed on every production lot. Typical installations include laboratory fume hood exhaust, pharmaceutical air handling units with high-efficiency final filters, cleanroom pressurization fans, dense-fin coil units and industrial ventilation packages. Accessories include mounting brackets, inlet rings, finger guards and a compatible 0-10 V controller.

Nominal Date
AC Backward Curved Centrifugal Fan image.png
Type FB3G190-2AGL-90
Model BLDCEC92

 

Nominal Voltage VAC 230
Voltage range VAC 184~277
Current draw A 1.2±10%
Speed(RPM) min-1  4000±5%
Power consumption W 155±10%
Sound Pressure Level dB(A) 73±5%
Max. Air Flow CFM / m3 /H 727.5/1236.2
Max. Static Pressure In.wg /Pa 2.96/740
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G190-2AGL-90 delivers 1236.2 m3/h at 740 Pa while drawing only 155W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 190mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 190mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000