FB3G310-1AAL-90
| Nominal Voltage | VAC | 115 |
| Current draw | A | 2.8±10% |
| Speed(RPM) | min-1 | 2050±5% |
| Power consumption | W | 180±10% |
| Max. Air Flow | CFM / m3 /H | 1301.7/2211.9 |
| Max. Static Pressure | In.wg /Pa | 2.17/543 |
50pcs
Put a single 115VAC FB3G310-1AAL-90 where two or three smaller axial fans used to sit. Delivering a maximum air flow of 2211.9 m3/h (1301.7 CFM) from one 310 mm die-cast aluminum impeller, this backward curved centrifugal fan consolidates duct runs, cuts panel cut-outs and reduces the number of AC feeds a cabinet needs. Because the BLDCEC92 motor is an electronically commutated DC design with a built-in AC-to-DC stage, the unit connects straight to 115VAC mains (92~138V operating window) without an external transformer, so North American and Japanese equipment builders can drop it into existing 115V panels. At 2050 RPM the fan draws 180 W and 2.8 A while generating 543 Pa (2.17 In.wg) of static pressure, enough head to push through dense filter banks and long discharge plenums. Speed is commanded through the onboard EC control interface, allowing continuous modulation rather than fixed-speed operation. The motor is insulated to Class F with Class B rise, and the permanently lubricated ball bearing set is rated for long continuous duty. Typical installations include air handling units, telecom and IT enclosures, commercial kitchen ventilation, heat recovery and light industrial process cooling. The fan is CE and RoHS compliant. Model FB3G310-1AAL-90 from FANOVA is an OEM/ODM platform that can be customized for voltage, cable and connector. Choose it when the goal is fewer fans, lower installed cost and a high-volume, high-head duty point from a single compact package.
The FB3G310-1AAL-90 is a backward curved centrifugal fan built around a 310 mm single-inlet impeller cast in aluminum alloy, a construction that holds blade geometry under centrifugal load and resists the creep that can affect lighter materials at 2050 RPM. The backward curved blade profile is self-cleaning in the aerodynamic sense: air leaves the impeller at a favorable angle, so the fan reaches 2211.9 m3/h of free delivery and 543 Pa of maximum static pressure on the same curve, and efficiency stays high across the middle of the operating band where most HVAC and enclosure systems are designed to run. Because the blade tips run at a moderate speed for a wheel of this diameter, the acoustic signature stays at 67.7 dB(A) while the fan produces the air volume that normally requires several smaller axial units. The rotor is driven by a BLDCEC92 electronically commutated motor with a 92 mm rotor diameter. An internal power stage rectifies the 115VAC supply, accepted over 92~138V, into the DC bus, so no step-down transformer is needed in 115V markets; current draw is 2.8 A and shaft power is 180 W. Commutation is handled electronically, with the speed set through the built-in EC control interface, which accepts an external analog or PWM command so the fan can track thermostat, pressure or DCIM signals instead of running at a fixed speed. Electrical protection includes locked-rotor and over-temperature shutdown, and the winding system is Class F insulated with a Class B temperature rise for margin under continuous load. The motor is carried on permanently lubricated ball bearings selected for long L10 life in horizontal or vertical mounting, and the die-cast aluminum endcap and housing act as a stiff, corrosion-resistant structure that also helps conduct heat away from the stator. The impeller and housing are both aluminum alloy, keeping the assembly rigid and suitable for elevated ambient temperatures where molded plastics would soften. A 139 mm lead with 20AWG conductors is fitted as standard, with connector type, lead length and voltage variant available as OEM/ODM options. Units are CE and RoHS compliant and are inspected for balance, hipot and performance before shipment from FANOVA's Suzhou facility. The FB3G310-1AAL-90 is intended for air handling units, telecom shelters, IT racks, commercial ventilation and industrial cooling, where one 115VAC fan can replace a multiple-fan array and simplify the air path.
| AC Backward Curved Centrifugal Fan | ![]() |
|
| Type | FB3G310-1AAL-90 | |
| Model | BLDCEC92 | |
| Nominal Voltage | VAC | 115 |
| Voltage range | VAC | 92~138 |
| Current draw | A | 2.8±10% |
| Speed(RPM) | min-1 | 2050±5% |
| Power consumption | W | 180±10% |
| Sound Pressure Level | dB(A) | 67.7±5% |
| Max. Air Flow | CFM / m3 /H | 1301.7/2211.9 |
| Max. Static Pressure | In.wg /Pa | 2.17/543 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FB3G310-1AAL-90 delivers 2211.9 m3/h at 543 Pa while drawing only 180W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 310mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 310mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.