Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FK3G175-2ALH-70 EC Plug Fan 175mm 230V 798 m3/h

FK3G175-2ALH-70

Nominal Voltage VAC 230
Current draw A 0.8±10%
Speed(RPM) min-1  4000±5%
Power consumption W 101±10%
Max. Air Flow CFM / m3 /H 469.8/798.3
Max. Static Pressure In.wg /Pa 2.7/675

50pcs

Brand:
FANOVA
Spu:
FK3G175-2ALH-70
  • Overview
  • Recommended Products
Brief Description

The FK3G175-2ALH-70 plug fan is a 230VAC EC replacement workhorse designed for drop-in AC-to-EC retrofit projects, pairing a lightweight glass-fiber reinforced propylene impeller with a compact die-cast aluminum housing to deliver 469.8 CFM (798.3 m3/h) at 2.7 in.wg (675 Pa) from only 101 W. Its BLDCEC72 electronically commutated motor runs at 4000 RPM with 0.8 A current draw and accepts a wide 184~277VAC input, so the same unit serves 208V, 230V and 240V networks without transformers, contactors or external VFDs. Speed is controlled through a 0-10V analog input (PWM and RS485 options available on request), giving building automation systems continuous modulation instead of fixed on/off operation. The plastic-plus-glass-fiber impeller resists corrosion and chemical attack while keeping rotating mass low for fast acceleration and low bearing load; the die-cast aluminum endcap provides a rigid, thermally stable motor seat. Motor protection includes locked-rotor, over-current, over-voltage and under-voltage safeguards, with Class B insulation and an operating range suitable for typical HVAC plant rooms. Dual ball bearings are rated for approximately 40,000 hours at 40 degrees C, and the 20AWG, 500 mm flying lead simplifies wiring in tight plenum boxes. With a sound pressure level of 79.1 dB(A) at free delivery, the fan suits condenser and evaporator units, air handling unit plug-fan arrays, cleanroom recirculation, telecom cabinet cooling and light industrial exhaust. The FK3G175-2ALH-70 carries CE and RoHS declarations and is manufactured under FANOVA's ISO 9001 quality system in Suzhou, China.

Product Specification

The FK3G175-2ALH-70 is a backward-curved centrifugal plug fan built around a 175 mm diameter impeller molded from glass-fiber reinforced propylene. The impeller uses a backward-curved blade profile with a hub-to-tip ratio optimized for stable pressure generation across the full flow range; the glass-fiber loading raises blade stiffness so the wheel holds its shape at 4000 RPM while remaining light enough for rapid speed changes and low starting torque. Each impeller is dynamically balanced before assembly to limit vibration and extend bearing service life. The rotating assembly is mounted on a BLDCEC72 outer-rotor electronically commutated motor with a 72 mm rotor diameter, integrating the permanent-magnet rotor, three-phase stator and drive electronics in a single compact package. The motor delivers 101 W at 0.8 A from a 230VAC nominal supply and tolerates a 184~277VAC input window, making it suitable for 208V, 220V, 230V and 240V systems as well as supplies that sag under load. Commutation is sensorless and sinusoidal, which reduces torque ripple and acoustic noise compared with trapezoidal drives. Speed control is via a 0-10V DC analog interface as standard, with PWM duty-cycle input and isolated RS485/Modbus communication available as options; the drive also provides a tachometer output for verification of actual speed. Electrical protection covers locked-rotor shutdown, over-current limiting, over-voltage and under-voltage lockout, and short-circuit protection on the control input. Insulation is Class B, and the fan is designed for operation in ambient temperatures from -10 to +60 degrees C with appropriate derating at the upper end. The motor shaft runs in two pre-lubricated dual ball bearings rated for approximately 40,000 hours at 40 degrees C, and the bearing seats are machined into the die-cast aluminum endcap, which also acts as a heat sink for the drive electronics and maintains alignment under thermal cycling. The housing is die-cast aluminum with a corrosion-resistant conversion coating; the impeller inlet is fitted with a protective grille. Electrical connection is made through a 500 mm flying lead of 20AWG wire, color-coded for line, neutral, ground and control signals. The fan is CE marked and RoHS compliant, and production follows FANOVA's ISO 9001 quality management system with routine hipot, insulation-resistance, performance and balance checks on every unit.

Nominal Date
AC Plug Fan image.png
Type FK3G175-2ALH-70
Model BLDCEC72

 

Nominal Voltage VAC 230
Voltage range VAC 184~277
Current draw A 0.8±10%
Speed(RPM) min-1  4000±5%
Power consumption W 101±10%
Sound Pressure Level dB(A) 79.1±5%
Max. Air Flow CFM / m3 /H 469.8/798.3
Max. Static Pressure In.wg /Pa 2.7/675
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FK3G175-2ALH-70 delivers 798.3 m3/h at 675 Pa while drawing only 101W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 175mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 175mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000