Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FK3G175-24LH-7N DC Plug Fan 175mm 24V 686 m3/h

FK3G175-24LH-7N

Nominal Voltage VDC 24
Current draw A 3.7±10%
Speed(RPM) min-1  3900±5%
Power consumption W 88±10%
Max. Air Flow CFM / m3 /H 403.7/686
Max. Static Pressure In.wg /Pa 2.47/617

50pcs

Brand:
FANOVA
Spu:
FK3G175-24LH-7N
  • Overview
  • Recommended Products
Brief Description

The FK3G175-24LH-7N is a 24VDC backward-curved centrifugal plug fan built for low-voltage, safety-conscious installations where a compact footprint and modest power draw matter more than brute force. Operating from a 16 to 28VDC input, it delivers a maximum airflow of 403.7 CFM (686 m3/h) against a maximum static pressure of 2.47 In.wg (617 Pa) while consuming only 88 W at 3900 RPM, making it a natural fit for solar-charged battery banks, off-grid ventilation cabinets, telecom enclosures and mobile equipment where every watt is budgeted. The heart of the unit is a 175 mm impeller molded in glass-fiber reinforced propylene, a lightweight plastic composite that resists chemical attack and keeps rotating mass low so the BLDCDC72 brushless DC motor can spin up quickly without a heavy inrush. Speed is set by a 0-10VDC analog signal or PWM input through the integrated control interface, allowing precise airflow trimming instead of crude on/off cycling. Electrical protection includes locked-rotor and over-current limits, reverse-polarity tolerance, and Class B insulation rated for demanding continuous duty. The motor rides on sealed ball bearings specified for 40,000 hours of L10 life at 40 degrees C ambient, so maintenance intervals stretch over years of unattended operation. Typical applications include battery-room exhaust, solar inverter cooling, laboratory fume hoods, refrigerated transport and compact air-handling units. The fan carries CE and RoHS declarations and is manufactured under an ISO 9001 quality system, with each unit hipot tested and performance verified before packing.

Product Specification

The impeller of the FK3G175-24LH-7N measures 175 mm in diameter and is injection molded from glass-fiber reinforced propylene, a composite chosen for its favorable strength-to-weight ratio, broad chemical resistance and dimensional stability under continuous rotation. The backward-curved blade profile, produced with a controlled blade count and aerodynamically optimized exit angle, converts the motor's 3900 RPM into a smooth pressure curve that peaks at 617 Pa while free-air delivery reaches 686 m3/h. Because the plastic blades carry far less inertia than a metal rotor of equivalent size, the impeller accelerates from rest in well under a second and imposes minimal axial thrust on the bearing system. Each impeller is dynamically balanced after molding to reduce vibration and keep the acoustic signature at 66 dB(A) at rated speed. The rotor is housed in a die-cast aluminum endcap with a 72 mm rotor diameter, giving rigid support to the shaft, tight concentricity between stator and magnet, and an effective heat path that pulls copper losses away from the winding. The BLDCDC72 brushless DC motor uses a permanent-magnet rotor and three-phase electronically commutated stator, driven by an integrated inverter board that accepts any DC bus between 16 and 28VDC. At nominal 24VDC the fan draws 3.7 A and absorbs 88 W, an efficiency point that leaves headroom for battery voltage sag without stalling. Speed command arrives through a 0-10VDC analog input or a PWM duty signal, and a tachometer output reports actual RPM back to the host controller for closed-loop airflow management. The flying lead is a 500 mm, 20AWG cable with color-coded conductors for power, ground, control and tach, terminated ready for field connection. Electrical safeguards include soft-start current limiting, locked-rotor shutdown with automatic restart, over-current and over-temperature protection, and tolerance of reverse polarity on the supply. Insulation is Class B, and the winding is vacuum-impregnated to resist moisture and vibration. The shaft turns in two pre-lubricated sealed ball bearings rated for an L10 life of 40,000 hours at 40 degrees C, mounted in elastomer-isolated seats that damp frame-borne vibration. The die-cast aluminum endcap also serves as the mounting interface, with machined bosses that keep the fan square in the panel cutout. Every unit is hipot tested, burned in and checked against its airflow and pressure curve before shipment, and production runs under an ISO 9001 quality system with CE and RoHS compliance documentation available on request.

Nominal Date
DC Plug Fan image.png
Type FK3G175-24LH-7N
Model BLDCDC72

 

Nominal Voltage VDC 24
Voltage range VDC 16~28
Current draw A 3.7±10%
Speed(RPM) min-1  3900±5%
Power consumption W 88±10%
Sound Pressure Level dB(A) 66±5%
Max. Air Flow CFM / m3 /H 403.7/686
Max. Static Pressure In.wg /Pa 2.47/617
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FK3G175-24LH-7N delivers 686 m3/h at 617 Pa while drawing only 88W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 175mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 175mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000