FK3G133-2APL-70
| Nominal Voltage | VAC | 230 |
| Current draw | A | 0.35±10% |
| Speed(RPM) | min-1 | 4450±5% |
| Power consumption | W | 48±10% |
| Max. Air Flow | CFM / m3 /H | 275.7/468.4 |
| Max. Static Pressure | In.wg /Pa | 1.76/441 |
50pcs
The FK3G133-2APL-70 redefines what a compact plug fan can achieve in energy-constrained air-moving systems. As a 230VAC EC fan drawing just 48W, it delivers a remarkable 468.4 m3/h (275.7 CFM) at free air and generates up to 441 Pa (1.76 In.wg) of static pressure. This makes it an ideal drop-in upgrade for AC induction fans in OEM equipment, where it can cut energy use by more than half while providing variable-speed control via a 0-10V or PWM signal. The fan is built around a 133mm polypropylene impeller reinforced with glass fiber, offering excellent chemical resistance and a lightweight rotating mass that reduces bearing load. The external rotor BLDCEC72 motor is housed in a die-cast aluminum endcap, ensuring structural rigidity and efficient heat dissipation. Electrical connection is straightforward with a 20AWG, 500mm cable, and the fan operates over a wide voltage range of 184-277VAC, making it suitable for global markets. With a noise level of 67.8 dB(A) and a robust bearing system rated for 40,000 hours at 40°C, this model balances acoustic comfort with long service life. It is certified to CE and RoHS standards, and its backward-curved impeller design ensures stable airflow in applications such as air purifiers, heat recovery ventilators, and compact cooling units. The FK3G133-2APL-70 is the smart choice for engineers seeking a high-efficiency, low-power solution that does not compromise on performance.
The FK3G133-2APL-70 is a backward-curved centrifugal plug fan engineered for precise air movement in space-constrained, energy-sensitive applications. At its core lies a 133mm diameter impeller injection-molded from polypropylene compounded with 20% glass fiber, a material chosen for its balance of stiffness, chemical resistance, and low weight. The impeller features 11 backward-curved blades that are aerodynamically profiled to minimize turbulence and deliver a smooth, stable pressure curve. Each impeller is dynamically balanced to ISO 1940 G6.3 standards, reducing vibration and extending bearing life. The external rotor motor, designated BLDCEC72, is a three-phase electronically commutated design with integrated drive electronics. It operates from a 230VAC nominal supply (184-277VAC, 50/60Hz) and draws only 0.35A, resulting in a power consumption of 48W at the nominal operating point. Speed control is achieved via a 0-10VDC analog input or a 25kHz PWM signal, allowing seamless integration with building management systems or standalone controllers. The motor is protected against overcurrent, overvoltage, and locked-rotor conditions, and it features soft-start capability to limit inrush current. The die-cast aluminum endcap not only provides a rigid mounting interface but also acts as a heatsink for the power electronics, ensuring reliable operation even at high ambient temperatures. Electrical connection is made through a 500mm long, 20AWG cable with flying leads, color-coded for easy installation. The fan is designed for continuous duty and achieves a noise level of 67.8 dB(A) at maximum speed, measured at 1 meter in free air. The bearing system consists of two pre-lubricated, sealed ball bearings rated for an L10 life of 40,000 hours at 40°C ambient, and the motor is insulated to Class B standards. The fan is certified to CE and RoHS, and each unit is subjected to a 100% functional test before shipment. With its combination of high static pressure, low power draw, and compact footprint, the FK3G133-2APL-70 is suited for use in air purifiers, dehumidifiers, heat recovery ventilation units, and other OEM equipment where efficiency and reliability are paramount.
| AC Plug Fan | ![]() |
|
| Type | FK3G133-2APL-70 | |
| Model | BLDCEC72 | |
| Nominal Voltage | VAC | 230 |
| Voltage range | VAC | 184~277 |
| Current draw | A | 0.35±10% |
| Speed(RPM) | min-1 | 4450±5% |
| Power consumption | W | 48±10% |
| Sound Pressure Level | dB(A) | 67.8±5% |
| Max. Air Flow | CFM / m3 /H | 275.7/468.4 |
| Max. Static Pressure | In.wg /Pa | 1.76/441 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FK3G133-2APL-70 delivers 468.4 m3/h at 441 Pa while drawing only 48W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 133mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 133mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.