FK3G133-24PL-51
| Nominal Voltage | VDC | 24 |
| Current draw | A | 1.2±10% |
| Speed(RPM) | min-1 | 3850±5% |
| Power consumption | W | 28.8±10% |
| Max. Air Flow | CFM / m3 /H | 155.4/264 |
| Max. Static Pressure | In.wg /Pa | 1.48/371 |
50pcs
When acoustic comfort and low-voltage safety are non-negotiable, the FK3G133-24PL-51 plug fan delivers a whisper-quiet 59 dB(A) while drawing just 28.8 W from a 24 VDC supply. Its 133 mm glass-fiber reinforced propylene impeller and die-cast aluminum endcap keep the rotating mass low, so the BLDCDC53 brushless DC motor reaches 3850 RPM with minimal vibration and noise. The fan moves up to 264 m3H (155.4 CFM) at free air and develops 371 Pa (1.48 In.wg) of static pressure, making it suitable for compact ducted systems, filter boxes and electronics cooling where space and power are tight. Operating from 16 to 28 VDC at 1.2 A, it is ideal for off-grid solar, battery-backed cabinets and 24 V industrial controls. Speed is set by a 0-10 V analog or PWM signal, with tach output for monitoring. Insulation is Class B, polarity and locked-rotor protection are integrated, and the 20AWG 500 mm cable simplifies installation. Bearing life exceeds 70,000 hours at 40 C, and the fan carries CE and RoHS compliance. Typical uses include medical analyzers, laboratory fume hoods, telecom enclosures, EV charging stations and renewable-energy thermal management.
The FK3G133-24PL-51 is a backward-curved centrifugal plug fan built around a 133 mm diameter impeller molded from glass-fiber reinforced propylene. This composite construction gives a favorable strength-to-weight ratio, resisting chemical attack and UV exposure while keeping starting inertia low. The impeller uses a backward-curved blade profile with 11 blades, optimized for stable pressure generation and low tonal noise. Each impeller is dynamically balanced to ISO 1940 G6.3 before assembly, which curtails vibration at the 3850 RPM operating point. The single-piece die-cast aluminum endcap serves as both motor housing and mounting flange, with four M4 threaded inserts on a 120 mm bolt circle. The rotor diameter of 53 mm houses a BLDCDC53 three-phase brushless DC motor with integrated commutation electronics. Hall-effect sensors provide rotor position feedback, and the drive delivers sinusoidal current to minimize torque ripple. At 24 VDC nominal (16 to 28 VDC range) the fan draws 1.2 A and consumes 28.8 W, producing a maximum airflow of 264 m3H (155.4 CFM) and a maximum static pressure of 371 Pa (1.48 In.wg). Speed control accepts a 0-10 VDC analog input or a 25 kHz PWM signal; a separate tachometer output provides two pulses per revolution for closed-loop monitoring. The control cable is 20AWG, 500 mm long, with flying leads for power, ground, control and tach. Electrical protection includes reverse-polarity, over-current and locked-rotor shutdown with automatic restart. Insulation is Class B, and the fan is designed for pollution degree 2 environments. The motor uses two precision ball bearings lubricated for life; calculated L10 life exceeds 70,000 hours at 40 C ambient. Acoustic output is 59 dB(A) at one meter, measured in free-field conditions, qualifying the fan for noise-sensitive medical, laboratory and office equipment. The fan is CE marked and RoHS compliant, and each unit is function-tested at rated voltage before packing.
| DC Plug Fan | ![]() |
|
| Type | FK3G133-24PL-51 | |
| Model | BLDCDC53 | |
| Nominal Voltage | VDC | 24 |
| Voltage range | VDC | 16~28 |
| Current draw | A | 1.2±10% |
| Speed(RPM) | min-1 | 3850±5% |
| Power consumption | W | 28.8±10% |
| Sound Pressure Level | dB(A) | 59±5% |
| Max. Air Flow | CFM / m3 /H | 155.4/264 |
| Max. Static Pressure | In.wg /Pa | 1.48/371 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FK3G133-24PL-51 delivers 264 m3/h at 371 Pa while drawing only 28.8W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 133mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 133mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.