Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FF3G200-2AGD-20 EC Forward Curved Centrifugal Fan 200mm 230V 2050 m3/h

FF3G200-2AGD-20

Nominal Voltage VAC 230
Current draw A 2.4±10%
Speed(RPM) min-1  2400±5%
Power consumption W 500±10%
Max. Air Flow CFM / m3 /H 1206.4/2050
Max. Static Pressure In.wg /Pa 4.44/1110

50pcs

Brand:
FANOVA
Spu:
FF3G200-2AGD-20
  • Overview
  • Recommended Products
Brief Description

The FF3G200-2AGD-20 is a forward curved centrifugal fan built for HVAC engineers who need to move serious air through restrictive ductwork without adding a second blower. Its two signature strengths are a 2050 m3/h (1206.4 CFM) maximum airflow and a 1110 Pa (4.44 In.wg) maximum static pressure, a combination that lets a single 200 mm impeller replace a pair of smaller fans in air handling units and dense filter cabinets. The fan is powered by a 500 W BLDCEC102 electronically commutated motor running on 230VAC with a wide 184 to 270 V tolerance, drawing 2.4 A at a nominal 2400 RPM. Because the EC motor accepts universal AC mains, it drops straight into existing 230 V installations as a plug-and-play upgrade for fixed-speed AC fans, and speed is trimmed through the integrated 0 to 10 V control interface rather than external inverters. The forward curved impeller is fabricated from cold-rolled steel plate for stiffness and wear resistance, housed in a die-cast aluminum endcap that holds bearing alignment under vibration. Motor protection and insulation meet Class F requirements, and the sealed ball bearing system is rated for a long L10 service life with low acoustic output of 76.4 dB(A) at full speed. Typical duties include air handling units, packaged rooftop equipment, industrial ventilation, cleanroom filtration and process cooling, and the unit carries CE and RoHS compliance. Choose the FF3G200-2AGD-20 when one robust steel-wheel fan must deliver both volume and pressure head.

Product Specification

The FF3G200-2AGD-20 is a single-inlet forward curved centrifugal fan from FANOVA (Suzhou Xinhengxin Air-conditioning & Refrigeration) designed around a 200 mm diameter impeller. The wheel is formed from cold-rolled steel plate, with blades pressed and continuously welded to the backplate and shroud so that the forward curved profile keeps its geometry at 2400 RPM. Cold-rolled steel gives the impeller high stiffness, resistance to deformation under centrifugal load and good tolerance of dusty or abrasive airstreams, and the multi-blade forward curved layout produces a steep pressure curve that holds up in long ducts and high resistance filters. The rotating assembly is statically and dynamically balanced before assembly to keep vibration low at the full 2400 RPM operating point. The fan delivers a maximum airflow of 2050 m3/h (1206.4 CFM) and a maximum static pressure of 1110 Pa (4.44 In.wg) while consuming 500 W. The motor is a BLDCEC102 electronically commutated brushless DC machine with a 102 mm rotor diameter, combining permanent magnet efficiency with electronic commutation. It operates from a 230VAC supply with a working range of 184 to 270 V, drawing 2.4 A, and holds speed against line and load variation through closed-loop control, so airflow stays stable as filters load. Speed is set by an analog 0 to 10 V signal, with PWM input available, and the electronics include soft start, over-current, over-voltage, locked rotor and thermal protection. Motor windings are Class F insulated for thermal margin, and the drive board is conformally coated against humidity. The shaft runs in sealed, pre-lubricated ball bearings selected for long L10 life and quiet running, contributing to the 76.4 dB(A) sound pressure level measured at full speed. The endcap and motor housing are die-cast aluminum, which conducts heat away from the electronics and keeps bearing bores round, while the galvanized steel mounting cradle provides a rigid base. Electrical connection is made through an 18AWG cable, 500 mm long, with clearly marked lead colors for mains, control and tach output. Every unit is hipot tested, run-in and checked for balance and current draw before packing, and the series is CE and RoHS compliant, with RoHS-restricted materials excluded from the impeller coating. Typical installations include air handling units, rooftop packaged units, filter and HEPA cabinets, industrial exhaust and process cooling, where the combination of high static pressure and 2050 m3/h airflow allows one fan to replace multiple smaller blowers.

Nominal Date
AC Forward Curved Centrifugal Fan image.png
Type FF3G200-2AGD-20
Model BLDCEC102

 

Nominal Voltage VAC 230
Voltage range VAC 184~270
Current draw A 2.4±10%
Speed(RPM) min-1  2400±5%
Power consumption W 500±10%
Sound Pressure Level dB(A) 76.4±5%
Max. Air Flow CFM / m3 /H 1206.4/2050
Max. Static Pressure In.wg /Pa 4.44/1110
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FF3G200-2AGD-20 delivers 2050 m3/h at 1110 Pa while drawing only 500W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 200mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 200mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000