FF3G225-2AGL-20
| Nominal Voltage | VAC | 230 |
| Current draw | A | 1.5±10% |
| Speed(RPM) | min-1 | 1250±5% |
| Power consumption | W | 500±10% |
| Max. Air Flow | CFM / m3 /H | 1024.58/1741 |
| Max. Static Pressure | In.wg /Pa | 4.212/1053 |
50pcs
When a single 225 mm impeller can deliver 1741 m3/h (1024.58 CFM) at up to 1053 Pa (4.212 In.wg), the days of installing multiple smaller fans are over. The FF3G225-2AGL-20 is a forward curved centrifugal fan that combines high airflow with ultra-high static pressure, making it the ideal drop-in replacement for two or three lower-performance fans in space-constrained air handling units, heat recovery ventilators, and industrial filtration systems. Powered by a 230VAC BLDCEC102 motor (operating range 184-270V), this fan draws just 1.5 A while delivering 500 W of output at 1250 RPM. The motor is an electronically commutated (EC) design with integrated control electronics, accepting 0-10V DC or PWM speed signals for precise modulation. The impeller is constructed from galvanized steel sheet, providing excellent corrosion resistance and durability in harsh environments, and is directly driven by the motor for maintenance-free operation. With a noise level of 74.9 dB(A) at full speed, the fan is suitable for industrial applications where noise is less critical, but the EC motor allows speed reduction to lower noise in partial-load conditions. The die-cast aluminum endcap and housing ensure structural rigidity and heat dissipation. The fan is protected against overload and locked-rotor conditions, and the motor insulation is Class B, with an expected bearing life of 40,000 hours at 40°C ambient. Typical applications include commercial HVAC, cleanroom pressurization, fume extraction, and process cooling. The FF3G225-2AGL-20 is CE and RoHS certified and is manufactured under ISO 9001 quality management.
The FF3G225-2AGL-20 is a high-performance forward curved centrifugal fan engineered for applications demanding both high airflow and ultra-high static pressure. The impeller, with a diameter of 225 mm, is fabricated from galvanized steel sheet, which offers a balance of strength, corrosion resistance, and cost-effectiveness. The forward curved blade design, with a precisely calculated blade count and curvature, ensures optimal aerodynamic efficiency and smooth airflow. The impeller is dynamically balanced to ISO 1940 G6.3 standards, minimizing vibration and extending bearing life. The fan is driven by a BLDCEC102 electronically commutated motor, which integrates the motor, control electronics, and protection circuits into a compact package. The motor is rated for 230VAC nominal input (184-270V range), 1.5 A current draw, and 500 W output power at 1250 RPM. The EC motor technology provides high efficiency, especially at partial loads, and allows for stepless speed control via a 0-10V DC analog signal or a PWM input. The motor is equipped with soft-start and ramp-up functions to prevent sudden inrush currents, and it includes overvoltage, undervoltage, overcurrent, and locked-rotor protection. The motor insulation is Class B (130°C), and the motor is designed for continuous operation in ambient temperatures up to 40°C. The fan is cooled by the airstream, ensuring reliable operation even in demanding conditions. The die-cast aluminum endcap and housing provide a rigid structure and excellent heat dissipation for the motor and electronics. The fan is supplied with an 18AWG cable, 187 mm in length, for power and control connections. The cable is pre-stripped and tinned for easy installation. The fan is designed for horizontal or vertical mounting, with mounting holes on the endcap. The FF3G225-2AGL-20 has been tested to meet the requirements of EN 60335-1 and EN 60335-2-80 for household and similar electrical appliances, and it is CE and RoHS compliant. The manufacturing process follows ISO 9001:2015 quality management system, and each fan undergoes a comprehensive functional test before shipment, including performance verification, insulation resistance test, and high-voltage test. With a maximum airflow of 1741 m3/h and a maximum static pressure of 1053 Pa, this fan is capable of overcoming the resistance of long duct runs and high-efficiency filters, making it suitable for use in air handling units, cleanrooms, and industrial ventilation systems. The fan's compact design and high power density allow it to replace larger, less efficient fans, saving space and reducing energy consumption.
| AC Forward Curved Centrifugal Fan | ![]() |
|
| Type | FF3G225-2AGL-20 | |
| Model | BLDCEC102 | |
| Nominal Voltage | VAC | 230 |
| Voltage range | VAC | 184~270 |
| Current draw | A | 1.5±10% |
| Speed(RPM) | min-1 | 1250±5% |
| Power consumption | W | 500±10% |
| Sound Pressure Level | dB(A) | 74.9±5% |
| Max. Air Flow | CFM / m3 /H | 1024.58/1741 |
| Max. Static Pressure | In.wg /Pa | 4.212/1053 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FF3G225-2AGL-20 delivers 1741 m3/h at 1053 Pa while drawing only 500W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 225mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 225mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.