FB3G310-4AAS-10
| Nominal Voltage | VAC | 380 |
| Current draw | A | 2.6±10% |
| Speed(RPM) | min-1 | 3300±5% |
| Power consumption | W | 1600±10% |
| Max. Air Flow | CFM / m3 /H | 3357.4/5705 |
| Max. Static Pressure | In.wg /Pa | 6.0/1500 |
50pcs
When a single air mover must shoulder the entire pressure budget of a long duct run, the FB3G310-4AAS-10 answers with twin superpowers: 1500 Pa of maximum static pressure and 5705 m3/h of free-air volume from one 310 mm impeller. This backward curved centrifugal fan runs on 380VAC three-phase supply (usable from 304V), drawing 2.6 A and delivering 1600 W at 3300 RPM, so a single unit can replace a bank of smaller blowers and their associated wiring, guards and maintenance points. The motor is a BLDCEC137 electronically commutated design with a 137 mm rotor, giving stepless 0-10V or PWM speed regulation instead of fixed tap settings, which lets the installer trim airflow to the actual system curve rather than dumping excess energy across a damper. Both the impeller and the endcap/housing are die-cast aluminum, a combination that holds blade geometry under centrifugal load and dissipates heat from the motor compartment in high-duty cycling. Electrical protection and insulation follow the series EC platform, and the dual-ball bearing set is rated for 40,000 hours at 40C ambient, keeping the fan within planned service intervals in continuous ventilation. Sound pressure is 92 dB(A) at full speed, acceptable for plant rooms, rooftop packages and cabinet exhaust where the fan is acoustically isolated from occupied space. Typical applications include high-resistance HEPA filtration, industrial dust collection, drying tunnels, air handling units and process cooling on new energy equipment. The unit carries CE and RoHS declarations and is produced under the FANOVA ISO 9001 quality system. For OEM projects, cable length, connector type and control interface can be customized against drawing approval.
The FB3G310-4AAS-10 is built around a 310 mm diameter backward curved centrifugal impeller cast from aluminum alloy, with a blade count and exit angle selected to convert high rotational speed into pressure rather than turbulence. Backward curved blades are inherently self-limiting: as system resistance rises, the impeller unloads and motor current falls, so the 1600 W power figure represents the free-delivery condition rather than a locked-rotor ceiling. At 3300 RPM the fan produces 5705 m3/h at zero static pressure and 1500 Pa at shutoff, a curve steep enough to hold working airflow through long duct runs, multi-stage filters and high-pressure-drop heat exchangers. The die-cast aluminum endcap and housing carry the bearing seats and motor mount in one rigid structure, controlling vibration and shaft alignment at the top of the speed range; aluminum also sheds motor heat without a separate cooling fan in the airstream. The drive is a BLDCEC137 electronically commutated motor with a 137 mm rotor, a three-phase permanent-magnet topology that reaches higher power density than an induction motor of the same frame. Speed is commanded through a 0-10V analog input or a PWM signal, with tachometer output available for verification; the drive accepts 380VAC nominal three-phase supply and operates down to 304V, covering brownout and long-feeder conditions in industrial plants. Running current is 2.6 A at rated load. The electrical interface uses an 18AWG cable with a 286 mm tail as standard, and the factory can supply alternative lengths, flying leads or terminated connectors for production-line assembly. Bearings are preloaded dual-ball units with a calculated L10 life of 40,000 hours at 40C ambient, lubricated for life and shielded against dust ingress. The motor winding system meets the insulation and dielectric requirements of the EC platform, and the fan carries CE and RoHS declarations under the FANOVA ISO 9001 quality system, with routine hipot, balance and performance testing on every production lot. Mounting is by the aluminum housing flange in any orientation; airflow direction and rotation are marked on the casing. Accessories include a matching inlet ring, guard grille and mounting brackets. Custom impeller trims, alternative control voltages and IP upgrades are available for OEM and ODM programs.
| AC Backward Curved Centrifugal Fan | ![]() |
|
| Type | FB3G310-4AAS-10 | |
| Model | BLDCEC137 | |
| Nominal Voltage | VAC | 380 |
| Voltage range | VAC | 304 |
| Current draw | A | 2.6±10% |
| Speed(RPM) | min-1 | 3300±5% |
| Power consumption | W | 1600±10% |
| Sound Pressure Level | dB(A) | 92±5% |
| Max. Air Flow | CFM / m3 /H | 3357.4/5705 |
| Max. Static Pressure | In.wg /Pa | 6.0/1500 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FB3G310-4AAS-10 delivers 5705 m3/h at 1500 Pa while drawing only 1600W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 310mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 310mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.