FB3G310-110AS-3Z
| Nominal Voltage | VDC | 110 |
| Current draw | A | 7.8±10% |
| Speed(RPM) | min-1 | 2660±5% |
| Power consumption | W | 850±10% |
| Max. Air Flow | CFM / m3 /H | 2656.49/4514 |
| Max. Static Pressure | In.wg /Pa | 3.83/958 |
50pcs
When a single centrifugal blower must shoulder the airflow of two or three smaller fans, the FB3G310-110AS-3Z answers with a 4514 m3/h maximum delivery and 958 Pa peak static pressure from one 310 mm aluminium-alloy impeller. Its 110 VDC high-voltage DC bus is the second superpower: at 7.8 A the unit draws only a fraction of the current that a 24 V or 48 V system would demand for the same 850 W output, simplifying cable sizing and reducing I2R losses across industrial DC microgrids and battery-backed cabinets. The backward-curved blade geometry, die-cast aluminium housing and 102 mm rotor are built around the BLDCDC137 brushless DC motor, which reaches 2660 RPM with electronic commutation for long, maintenance-light service. Speed is trimmed through a 0-10 V or PWM control interface, allowing the fan to follow real duct pressure instead of running flat-out. Protection and insulation are engineered for 110 VDC industrial duty, with class-level winding insulation and locked-rotor, over-current and over-temperature safeguards; the dual ball-bearing set is rated for extended L10 life at continuous temperature. At 84.6 dB(A) the acoustic signature is kept in check by the large, slow-turning impeller, making the unit suitable for air handling units, HEPA pre-filtration racks, telecom DC power cabinets, heat-exchanger skids and new-energy thermal management. The 18AWG, 1000 mm flying lead simplifies field wiring, and the fan is CE and RoHS compliant under FANOVA's ISO-controlled production.
The FB3G310-110AS-3Z is a backward-curved centrifugal fan built for high-volume, high-pressure duty on a 110 VDC bus. Its impeller measures 310 mm in diameter and is fabricated from aluminium alloy plate, a material chosen for a high strength-to-weight ratio that lets the wheel turn at 2660 RPM without the tip deflection that would blur blade clearances. Backward-curved blades are self-cleaning in nature: the centrifugal action throws dust outward rather than trapping it on the leading edge, so pressure and airflow stay stable in dirty exhaust streams. The wheel is dynamically balanced to ISO 1940 grade after assembly, keeping vibration low and bearing load even. The die-cast aluminium endcap and housing form a rigid, corrosion-resistant cradle that holds the rotor concentric with the inlet ring, while the 102 mm rotor diameter gives the BLDCDC137 brushless DC motor enough magnetic area to produce 850 W continuously without excessive current density. Commutation is electronic, so there are no brushes to wear or spark; the motor is wound for a 110 VDC nominal input with an operating window of 70 to 170 VDC, letting it ride through the voltage sag and surge typical of rectified industrial DC grids and battery plants. At nominal 110 V the fan draws 7.8 A. Speed control is handled through a 0-10 V analog or PWM input, and the drive accepts external tach or alarm feedback for DCIM and BMS integration, so the fan can be ramped to match filter loading rather than wasting energy at full speed. Electrical interface is a 1000 mm, 18AWG cable, sized for the current and flexible enough for tight cabinet routing. Mechanically, the shaft runs in a pair of pre-lubricated dual ball bearings selected for high-temperature continuous operation and rated for an L10 life well beyond the service interval of the equipment it cools; the bearing housing is isolated from the motor heat path to keep grease life predictable. Protection features include locked-rotor shutdown, over-current limiting and over-temperature foldback, with insulation class F windings on a class B rise for thermal margin. The fan carries CE and RoHS marks and is built under FANOVA's ISO 9001 quality system, with each unit hipot-tested and performance-sampled before packing.
| DC Backward Curved Centrifugal Fan | ![]() |
|
| Type | FB3G310-110AS-3Z | |
| Model | BLDCDC137 | |
| Nominal Voltage | VDC | 110 |
| Voltage range | VDC | 70~170 |
| Current draw | A | 7.8±10% |
| Speed(RPM) | min-1 | 2660±5% |
| Power consumption | W | 850±10% |
| Sound Pressure Level | dB(A) | 84.6±5% |
| Max. Air Flow | CFM / m3 /H | 2656.49/4514 |
| Max. Static Pressure | In.wg /Pa | 3.83/958 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FB3G310-110AS-3Z delivers 4514 m3/h at 958 Pa while drawing only 850W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 310mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 310mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.