Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G450-4AAL-30 EC Backward Curved Centrifugal Fan 450mm 380V 6645 m3/h

FB3G450-4AAL-30

Nominal Voltage VAC 380
Current draw A 1.25±10%
Speed(RPM) min-1  1820±5%
Power consumption W 750±10%
Max. Air Flow CFM / m3 /H 3910.6/6645
Max. Static Pressure In.wg /Pa 3.12/780

10pcs

Brand:
FANOVA
Spu:
FB3G450-4AAL-30
  • Overview
  • Recommended Products
Brief Description

When a single air mover must replace a bank of smaller fans, the FB3G450-4AAL-30 backward curved centrifugal fan delivers the kind of combined volume and pressure that simplifies system architecture. Its 450 mm die-cast aluminum impeller and 137 mm rotor turn at 1820 RPM to produce a maximum air flow of 6645 m3/h (3910.6 CFM) and a maximum static pressure of 780 Pa (3.12 In.wg), so one fan can serve long duct runs, high-resistance filter banks, or multiple discharge points without staging. The BLDCEC137 electronically commutated motor is rated 750 W at 380VAC (operating range 304V), drawing 1.25 A and running at 76 dB(A) - a power class that supports heavy industrial duty while retaining the controllability of EC technology. Speed is set by a 0-10 VDC or PWM control signal, with tach output and fault feedback available for building management and DCIM integration. The motor is protected against over-temperature and locked-rotor conditions, and insulation is Class F for thermal margin. Bearings are sealed-for-life ball bearings rated for 40,000 hours at 40 deg C ambient, keeping maintenance intervals long in continuous ventilation service. Typical applications include HVAC air handling units, cleanroom and pharmaceutical filtration, data center cooling, new energy battery room exhaust, and industrial process ventilation. The fan carries CE and RoHS certification and is manufactured under ISO 9001 quality management. For OEM/ODM programs, FANOVA (Suzhou Xinhengxin Air-conditioning & Refrigeration) can tailor cable length, control interface, and mounting configuration to match your assembly line.

Product Specification

The FB3G450-4AAL-30 is built around a 450 mm diameter backward curved impeller die-cast in aluminum alloy, a construction chosen for dimensional stability at 1820 RPM and for resistance to the vibration that accompanies high static pressure duty. The impeller carries a dense array of backward curved blades - the exact count is optimized per tooling - that guide air radially outward with low separation loss, which is why the fan reaches 6645 m3/h at free delivery while still generating 780 Pa at shutoff. The blade geometry and the die-cast hub are balanced as an assembly before final motor coupling, keeping vibration within the limits required for duct-mounted installation. The endcap and housing are also die-cast aluminum, providing a rigid structure that holds the impeller-to-inlet clearance constant and helps dissipate motor heat in enclosed air handling compartments. At the core is the BLDCEC137 motor, a three-phase brushless DC design with a 137 mm rotor diameter. Its integrated electronics convert the 380VAC supply - accepted over a 304V to 380VAC window - into the DC bus and commutation signals required for smooth, stepless speed regulation. The motor delivers 750 W at 1820 RPM while drawing 1.25 A, giving the fan a power density that supports heavy-duty industrial cycles. Unlike a fixed-speed AC induction fan, the EC motor maintains efficiency across the speed range, so part-load operation in variable-air-volume systems yields meaningful energy savings. Speed control is through a 0-10 VDC analog input or a PWM signal, with a tachometer output for rpm verification and an alarm output for fault reporting to a BMS or DCIM platform. Electrical connection is made through an 18AWG cable, 281 mm in length, with the conductor count and connector type configured to the control interface ordered. The cable is rated for the fan's current and is strain-relieved at the housing entry. Motor protection includes electronic over-temperature and locked-rotor detection, and the winding system is Class F insulated, allowing operation in ambient temperatures up to 40 deg C with thermal headroom. The shaft runs in sealed-for-life ball bearings selected for 40,000 hours L10 life at 40 deg C, lubricated for the full service interval and shielded against dust ingress. The fan is RoHS compliant, carries CE marking, and is produced under an ISO 9001 quality system with routine hipot, insulation resistance, and performance testing on every unit. As an OEM/ODM supplier, FANOVA can adapt the cable length, connector, control voltage, and mounting brackets for specific equipment designs.

Nominal Date
AC Backward Curved Centrifugal Fan image.png
Type FB3G450-4AAL-30
Model BLDCEC137

 

Nominal Voltage VAC 380
Voltage range VAC 304
Current draw A 1.25±10%
Speed(RPM) min-1  1820±5%
Power consumption W 750±10%
Sound Pressure Level dB(A) 76±5%
Max. Air Flow CFM / m3 /H 3910.6/6645
Max. Static Pressure In.wg /Pa 3.12/780
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G450-4AAL-30 delivers 6645 m3/h at 780 Pa while drawing only 750W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 450mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 450mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000