Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FD3G133-2APD-70 EC Dual Inlet Centrifugal Blower 133mm 230V 861 m3/h

FD3G133-2APD-70

Nominal Voltage VAC 230
Current draw A 0.75±10%
Speed(RPM) min-1  1350±5%
Power consumption W 105±10%
Max. Air Flow CFM / m3 /H 506.5/860.7
Max. Static Pressure In.wg /Pa 0.792/198

50pcs

Brand:
FANOVA
Spu:
FD3G133-2APD-70
  • Overview
  • Recommended Products
Brief Description

Quiet enough to disappear into the background: the FD3G133-2APD-70 is a dual inlet centrifugal blower whose 62.8 dB(A) sound level sits below normal conversational speech, making it a natural fit for laboratories, clinics, clean rooms and open-plan offices where fan noise is simply not acceptable. Feeding that silence is a lightweight 133 mm impeller molded from glass-fiber reinforced propylene, which keeps rotating mass low and trims both vibration and bearing load. The 230VAC EC72 BLDC motor accepts anything from 184 to 277V, so the same blower can be specified for 208V, 240V or 277V distribution without a step-down transformer, and it draws only 0.75 A while delivering 105 W of output. At 1350 RPM the twin-inlet impeller moves 506.5 CFM (860.7 m3/h) against a maximum static pressure of 0.792 In.wg (198 Pa), enough head to push air through duct runs, filters and heat-exchange coils in air handling and ventilation assemblies. Speed is set by a 0-10V DC or PWM control signal, allowing airflow to be trimmed to actual demand rather than fixed at full output, with tach output available for monitoring. The die-cast aluminum endcap and housing hold the rotor on permanently lubricated ball bearings rated for 40,000 hours at 40 degrees C, and the motor is built with Class B insulation and a locked-rotor protection circuit. A 176 mm 20AWG lead exits the housing for quick connection. The FD3G133-2APD-70 is CE and RoHS compliant, UL recognized on request, and backed by FANOVA's Suzhou manufacturing and OEM/ODM engineering support.

Product Specification

The FD3G133-2APD-70 is a double-inlet centrifugal blower built around a 133 mm diameter impeller with a 72 mm rotor, molded in glass-fiber reinforced propylene. The forward-curved blade set is produced in a single injection-molded piece with a molded hub and balanced after assembly, which keeps tip runout tight and suppresses the tonal noise that plagues metal wheels at higher speeds. Because the polypropylene-glass composite is light, the impeller accelerates and decelerates quickly under variable-speed control and imposes less radial load on the shaft, a combination that contributes directly to the 62.8 dB(A) measured sound pressure. The scroll housing and endcap are die-cast aluminum, giving the blower a rigid structure that damps casing resonance while providing a stable mounting face for the motor and a clean path for the twin inlet airstreams. The motor is a BLDC EC72 electronically commutated design rated at 230VAC nominal with a wide 184 to 277V operating window, 0.75 A current draw and 105 W input, running at 1350 RPM. Its integrated drive converts incoming AC to the DC bus internally, so no external transformer or rectifier is needed, and the same unit can be applied across 208V, 240V and 277V systems. Speed is commanded through a 0-10V DC analog input or a PWM signal, with a tachometer output for speed feedback and fault reporting to a building controller; the drive includes soft start, locked-rotor and over-temperature protection. Air performance peaks at 506.5 CFM (860.7 m3/h) free delivery and 0.792 In.wg (198 Pa) shutoff static pressure, a curve suited to ducted ventilation, coil and filter banks, and compact air handling equipment. The rotor runs in permanently lubricated ball bearings with an L10 life of 40,000 hours at 40 degrees C ambient, mounted in the die-cast aluminum endcap with a controlled preload to keep vibration low across the speed range. Electrical connection is made through a 176 mm, 20AWG cable led out of the housing, with color-coded conductors for line, neutral, control and tach. Insulation is Class B, dielectric strength is tested at 1500VAC for one minute, and the blower carries CE and RoHS marks with UL recognition available for OEM programs. Every unit is run-tested for airflow, current and noise before packing, and FANOVA supports customized cable lengths, connectors, mounting brackets and control profiles for volume ODM orders.

Nominal Date
AC Dual Inlet Centrifugal Blower image.png
Type FD3G133-2APD-70
Model BLDCEC72

 

Nominal Voltage VAC 230
Voltage range VAC 184~277
Current draw A 0.75±10%
Speed(RPM) min-1  1350±5%
Power consumption W 105±10%
Sound Pressure Level dB(A) 62.8±5%
Max. Air Flow CFM / m3 /H 506.5/860.7
Max. Static Pressure In.wg /Pa 0.792/198
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FD3G133-2APD-70 delivers 860.7 m3/h at 198 Pa while drawing only 105W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 133mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 133mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000