Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G450-4AAY-30 EC Backward Curved Centrifugal Fan 450mm 380V 7700 m3/h

FB3G450-4AAY-30

Nominal Voltage VAC 380
Current draw A 1.67±10%
Speed(RPM) min-1  1450±5%
Power consumption W 1000±10%
Max. Air Flow CFM / m3 /H 4531.45/7700
Max. Static Pressure In.wg /Pa 2.66/665

10pcs

Brand:
FANOVA
Spu:
FB3G450-4AAY-30
  • Overview
  • Recommended Products
Brief Description

When a single backward curved centrifugal fan must move nearly 7,700 m3/h while surviving continuous heavy-duty duty cycles, the FB3G450-4AAY-30 is engineered to deliver. This 450 mm die-cast aluminum impeller fan produces a maximum airflow of 4531.45 CFM (7700 m3H) and 2.66 In.wg (665 Pa) static pressure, allowing one fan to replace multiple smaller units in large air-handling systems. The 380VAC three-phase input (operating range down to 304V) feeds a BLDCEC137 electronically commutated motor rated 1000 W at 1450 RPM, drawing 1.67 A. Speed is controlled via a 0-10V DC or PWM signal through the integrated EC drive, enabling precise airflow modulation and soft-start behavior without external VFDs. The motor is protected against over-temperature, over-current, locked rotor and under-voltage, with Class F insulation and an IP54-rated die-cast aluminum housing for dusty or humid plant rooms. Dual ball bearings rated for 40,000 hours at 40C ambient keep maintenance intervals long in continuous operation. The 450 mm backward curved impeller and matching die-cast aluminum endcap resist corrosion and vibration, while the 80 dB(A) sound level remains acceptable for mechanical rooms, rooftop units and industrial ventilation. Typical applications include cleanroom AHUs, data center cooling, fume extraction and process ventilation. The fan carries CE and RoHS certification and is manufactured under ISO 9001 quality management. For OEM buyers seeking a high-flow, high-power, large-impeller EC fan with a single-source supply, the FB3G450-4AAY-30 combines airflow density, energy efficiency and long-life mechanical design in one compact package.

Product Specification

The FB3G450-4AAY-30 is built around a 450 mm diameter backward curved centrifugal impeller made from die-cast aluminum, a material chosen for its high strength-to-weight ratio, dimensional stability at elevated temperatures and resistance to galvanic corrosion in humid airstreams. The impeller uses a dense array of backward curved blades that are aerodynamically profiled to reduce separation losses and turbulence at the trailing edge, which is why the fan can reach 7700 m3H at 1450 RPM while keeping noise to 80 dB(A). Each impeller is dynamically balanced to ISO 1940 G6.3 after assembly, minimizing vibration and bearing load across the full speed range. The matching die-cast aluminum endcap and housing provide a rigid structure that maintains precise tip clearance, further suppressing pulsation and tonal noise. The rotor diameter of 137 mm is matched to the BLDCEC137 motor, an electronically commutated three-phase BLDC design with permanent magnets on the rotor and a stator wound for 380VAC input (usable from 304VAC). The integrated EC drive rectifies the AC supply and generates a variable-frequency three-phase output, so the motor operates at 1000 W and 1.67 A with power factor correction and low harmonic distortion. Speed control is available through a 0-10V DC analog input or a 25 kHz PWM input, with a tachometer output for closed-loop monitoring and a fault relay for system integration. The control interface supports soft start and programmable acceleration, reducing inrush current and mechanical stress on belts and ductwork. Electrical protection includes over-voltage, under-voltage, over-current, locked-rotor and over-temperature shutdown, with automatic restart after fault clearance. The motor is insulated to Class F and the winding is impregnated for resistance to moisture and vibration. The fan is supplied with an 18AWG cable, 1000 mm long, for power and control connections, and the terminal block accepts field wiring for the 0-10V/PWM signal and tach output. The mechanical assembly uses two pre-lubricated dual ball bearings rated for 40,000 hours L10 life at 40C ambient, mounted in a die-cast aluminum bearing housing that conducts heat away from the shaft. The fan is designed for horizontal or vertical mounting and can be installed in any orientation without oil starvation. The housing is sealed to IP54, protecting against dust and splashing water, making the unit suitable for rooftop AHUs, industrial ventilation and outdoor condensing units. The fan is CE and RoHS certified and manufactured under an ISO 9001 quality system, with each unit subjected to a routine electrical and balance test before shipment. For OEM projects, FANOVA offers custom cable lengths, alternative control interfaces and modified mounting brackets to suit specific air-handling designs.

Nominal Date
AC Backward Curved Centrifugal Fan image.png
Type FB3G450-4AAY-30
Model BLDCEC137

 

Nominal Voltage VAC 380
Voltage range VAC 304
Current draw A 1.67±10%
Speed(RPM) min-1  1450±5%
Power consumption W 1000±10%
Sound Pressure Level dB(A) 80±5%
Max. Air Flow CFM / m3 /H 4531.45/7700
Max. Static Pressure In.wg /Pa 2.66/665
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G450-4AAY-30 delivers 7700 m3/h at 665 Pa while drawing only 1000W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 450mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 450mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000