Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G280-2APL-20 EC Backward Curved Centrifugal Fan 280mm 230V 3642 m3/h

FB3G280-2APL-20

Nominal Voltage VAC 230
Current draw A 2.2±10%
Speed(RPM) min-1  2750±5%
Power consumption W 500±10%
Max. Air Flow CFM / m3 /H 2143.32/3642
Max. Static Pressure In.wg /Pa 3.56/891

50pcs

Brand:
FANOVA
Spu:
FB3G280-2APL-20
  • Overview
  • Recommended Products
Brief Description

When a single air mover has to carry both the volume and the pressure load of an entire air-handling package, the FB3G280-2APL-20 is engineered to answer on both fronts at once: 3642 m3/h of free-air delivery and 891 Pa of maximum static pressure from one 280 mm impeller. That combination lets OEMs collapse two or three smaller fans into one mounting position, cutting sheet-metal work, wiring, filter loading and service points. The fan draws 500 W at 2750 RPM from a 230VAC supply that tolerates a wide 184 to 270 V band, so it rides through utility sag and brownout conditions without tripping. At its core is the BLDCEC102 electronically commutated motor, a rotor diameter of 102 mm paired with the large backward-curved wheel for high torque density at compact frame size. Speed is commanded over a standard EC control interface, giving stepless modulation from a 0-10 V signal, PWM or onboard potentiometer instead of transformer taps. The glass-fiber reinforced propylene impeller keeps rotating mass low for fast acceleration and clean coast-down, while the die-cast aluminum endcap and housing carry heat away from the electronics and hold alignment under belt-free direct drive. Insulation and winding protection are built for continuous industrial duty, and the long-life ball bearing system is rated for extended service intervals in 24/7 ventilation plant. A pre-terminated 18AWG cable, 500 mm long, simplifies drop-in connection in series production. Typical installations include commercial AHU supply and return sections, cleanroom recirculation, heat-recovery units, telecom and data-room cooling, and dense filter banks where a 700 Pa-plus pressure capability is mandatory. The fan carries CE and RoHS compliance for global HVAC projects. As a FANOVA OEM/ODM platform, the FB3G280-2APL-20 can be customized in cable length, connector, control curve and labeling for your specific unit.

Product Specification

The FB3G280-2APL-20 is a backward-curved centrifugal fan built around a 280 mm diameter impeller molded from glass-fiber reinforced propylene. The wheel uses a dense array of forward-swept-then-released backward-curved blades that convert high inlet velocity into static pressure efficiently across the full operating band, which is why the same impeller can post 3642 m3/h free delivery and still hold 891 Pa at shutoff. Glass-fiber loading raises blade stiffness so tip deflection stays controlled at 2750 RPM, and the composite surface resists moisture, mild chemical attack and dust build-up better than unfinished metal, keeping balance stable over long duty cycles. The wheel is dynamically balanced before assembly to limit vibration and tonal noise, with measured sound pressure at 80.7 dB(A).

Drive is provided by the BLDCEC102 EC motor, a three-phase brushless permanent-magnet machine with integrated commutation electronics. The 102 mm rotor diameter gives the torque headroom to spin the 280 mm wheel directly with no belt losses, and the EC architecture delivers efficiency well above shaded-pole or PSC equivalents at part speed. Electrical ratings are 230 VAC nominal, 184 to 270 VAC operating range, 2.2 A current draw and 500 W input at full speed. The wide-range input means the fan does not need a step transformer for export builds and continues to run on weak or generator-backed supplies. Speed control is handled through the onboard EC interface, accepting a 0-10 VDC analog command, a PWM duty signal or local potentiometer adjustment, with tach output available for monitoring. Soft-start ramps eliminate inrush spikes on shared circuits.

Mechanically, the motor sits in a die-cast aluminum endcap and housing. Aluminum was chosen for its thermal conductivity, drawing heat from the drive board and windings, and for its dimensional stability, which keeps the rotor-to-stator air gap constant through thermal cycling. The assembly is rated for continuous operation with Class F insulation and thermal protection embedded in the winding. Bearings are long-life pre-lubricated ball races selected for horizontal or vertical mounting, with a design life suited to 24/7 air-handling duty and low maintenance intervention. The electrical interface is a factory-fitted 18AWG cable, 500 mm in length, with flying leads ready for terminal-block or connector termination; custom lengths and plug types are available on request.

Quality and compliance: the fan is manufactured under FANOVA's ISO-controlled production system, hipot and insulation-resistance tested on every unit, and supplied with CE and RoHS declarations. Balancing, run-in and acoustic checks are performed on sample lots. Applications include AHU supply and extract, cleanroom recirculation, heat-recovery ventilation, filter cabinets and equipment cooling racks. Because the platform is designed for OEM/ODM integration, FANOVA can adapt the control curve, cable assembly, mounting flange and nameplate to match your enclosure and regional certification requirements.

Nominal Date
AC Backward Curved Centrifugal Fan image.png
Type FB3G280-2APL-20
Model BLDCEC102

 

Nominal Voltage VAC 230
Voltage range VAC 184~270
Current draw A 2.2±10%
Speed(RPM) min-1  2750±5%
Power consumption W 500±10%
Sound Pressure Level dB(A) 80.7±5%
Max. Air Flow CFM / m3 /H 2143.32/3642
Max. Static Pressure In.wg /Pa 3.56/891
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G280-2APL-20 delivers 3642 m3/h at 891 Pa while drawing only 500W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 280mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 280mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000