Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G280-2AGL-20 EC Backward Curved Centrifugal Fan 280mm 230V 2454 m3/h

FB3G280-2AGL-20

Nominal Voltage VAC 230
Current draw A 1.25±10%
Speed(RPM) min-1  3100±5%
Power consumption W 280±10%
Max. Air Flow CFM / m3 /H 1443.9/2453.5
Max. Static Pressure In.wg /Pa 3.69/923

50pcs

Brand:
FANOVA
Spu:
FB3G280-2AGL-20
  • Overview
  • Recommended Products
Brief Description

When a single 280 mm impeller has to move better than 2400 m3/h against real duct resistance, the FB3G280-2AGL-20 answers with a heavy-duty BLDCEC102 electronically commutated motor spinning at 3100 RPM on 230VAC. Its headline capability is dual: a maximum air flow of 1443.9 CFM (2453.5 m3H) combined with a maximum static pressure of 3.69 In.wg (923 Pa), so one fan can replace a pair of smaller AC units in high-resistance air handlers. The EC motor draws just 1.25 A from a wide 184 to 270VAC envelope, letting the same part number serve plants with unstable grid voltage without a step-down transformer. Speed is trimmed through a 0-10V analog signal or PWM input, with tachometer feedback available for building management and DCIM-style monitoring. The impeller is formed from galvanized steel sheet, giving abrasion and corrosion resistance in dusty industrial airstreams, while the die-cast aluminum endcap holds the rotor and bearing seat rigidly. Insulation is Class F with thermal protection built into the winding, and the dual ball-bearing set is rated for roughly 40,000 hours at 40 degrees C ambient. At 76 dB(A) it suits mechanical rooms, rooftop units and factory ventilation rather than quiet occupied spaces. Typical duties include HEPA and bag filtration, long extract runs, cleanroom make-up air, drying ovens and new-energy cabinet cooling. The fan carries CE and RoHS declarations and is manufactured under ISO 9001 in FANOVA's Suzhou plant.

Product Specification

The FB3G280-2AGL-20 belongs to FANOVA's backward curved centrifugal family and is built around a 280 mm diameter impeller pressed and riveted from galvanized steel sheet. Each of the forward-swept backward-curved blades is continuously welded to the backplate and shroud, and the zinc coating is retained across the formed leading edges so the wheel resists abrasion from filter dust and mildly corrosive process air. The wheel is dynamically balanced to ISO 1940 G6.3 at the finished assembly, which keeps vibration low at the 3100 RPM design point and protects the shaft from bending fatigue over long duty cycles. A die-cast aluminum endcap carries the bearing housing, motor stator seat and mounting flange in one rigid casting, so thermal expansion of the motor does not distort the air gap.

Drive is provided by the BLDCEC102 three-phase electronically commutated motor, a permanent-magnet rotor design with an integrated inverter board mounted inside the motor envelope. At 230VAC nominal, and tolerant of any supply between 184 and 270VAC, the fan absorbs 1.25 A and delivers 280 W of shaft power at 3100 RPM. Because the electronics rectify and re-invert the mains, speed is independent of line frequency, and the same unit can be applied on 50 Hz or 60 Hz systems without changing pulleys or capacitors. Control is offered through a 0-10V DC analog input, a PWM input, or an onboard potentiometer option; a tachometer output reports actual RPM to a controller, and the drive includes soft-start, locked-rotor and over-temperature protection. The 18AWG cable exits the motor with a 155 mm free length for connection into a terminal box or controller enclosure.

Electrically, the motor winding is Class F insulated for a 155 degrees C hot-spot rating, with a thermal protector embedded in the stator to interrupt the drive if winding temperature rises abnormally. Dielectric strength and insulation resistance are tested on every unit before packing. The rotor runs in two pre-lubricated, double-shielded ball bearings selected for a rated life of approximately 40,000 hours at 40 degrees C ambient; the bearing seats are machined into the aluminum endcap for concentricity, and the shaft is ground and hardened to limit wear at the inner races. The complete fan weighs in a range suitable for bracket or panel mounting, and the die-cast housing provides the structural stiffness needed when the wheel is loaded by high back pressure.

Performance is characterized at maximum flow of 1443.9 CFM (2453.5 m3H) in free delivery and maximum static pressure of 3.69 In.wg (923 Pa) at shut-off, with the operating curve covering the full 280 mm wheel map. Sound pressure at the nominal operating point is 76 dB(A), measured at one meter on the inlet side in a semi-reverberant room; inlet-side silencers or flexible connectors are recommended where the fan discharges into occupied areas. The unit is CE marked and RoHS compliant, is produced in an ISO 9001 certified facility, and each fan is routine tested for hi-pot, current draw and balance before shipment. Typical installations include bag and HEPA filter banks, long extract ductwork, cleanroom make-up air units, industrial drying ovens, telecom and energy-storage cabinet cooling, and rooftop air handlers where a single EC fan is preferred over multiple AC belt-driven assemblies. FANOVA supports OEM customization of cable length, connector type, control interface and mounting brackets for volume programs.

Nominal Date
AC Backward Curved Centrifugal Fan image.png
Type FB3G280-2AGL-20
Model BLDCEC102

 

Nominal Voltage VAC 230
Voltage range VAC 184~270
Current draw A 1.25±10%
Speed(RPM) min-1  3100±5%
Power consumption W 280±10%
Sound Pressure Level dB(A) 76±5%
Max. Air Flow CFM / m3 /H 1443.9/2453.5
Max. Static Pressure In.wg /Pa 3.69/923
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G280-2AGL-20 delivers 2453.5 m3/h at 923 Pa while drawing only 280W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 280mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 280mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000