Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G250-310PL-95 DC Backward Curved Centrifugal Fan 250mm 310V

FB3G250-310PL-95

Nominal Voltage VDC 310
Current draw A 0.38±10%
Speed(RPM) min-1  2500±5%
Power consumption W 118±10%
Max. Air Flow CFM / m3 /H 1288.8/2190
Max. Static Pressure In.wg /Pa 2.22/555

50pcs

Brand:
FANOVA
Spu:
FB3G250-310PL-95
  • Overview
  • Recommended Products
Brief Description

When a 250 mm impeller needs to disappear into the background of a working room, the FB3G250-310PL-95 is the answer: it holds acoustic output to 62.3 dB(A) while delivering 2.22 in.wg (555 Pa) of static pressure from a compact 118 W DC platform. That combination makes it a natural fit for medical equipment cabinets, laboratory fume hoods, analytical instrument racks and quiet office air-handling, where the fan should be heard only as a faint presence. The unit runs on 310VDC nominal, accepting a wide 254 to 374VDC input window, and draws just 0.38 A, so it can sit directly on a high-voltage DC bus without an intermediate transformer. At the center is the BLDCDC92 brushless DC motor, electronically commutated and paired with a glass-fiber reinforced propylene impeller that keeps rotating mass low and bearing loads gentle. Control is handled through the motor's DC speed interface, allowing 0 to 2500 RPM turndown so airflow can be trimmed to the actual duty point rather than fixed by the impeller. Insulation is Class B with standard thermal protection, and the die-cast aluminum endcap and housing give the assembly a rigid, dimensionally stable frame that damps vibration. Rated bearing life supports long continuous duty in sealed equipment, and the 20AWG, 118 mm lead with a defined termination simplifies wiring inside a control enclosure. The fan is built and tested under FANOVA's ISO 9001 quality system and can be supplied with CE and RoHS documentation for export programs. In short, this is a low-noise, high-pressure DC centrifugal stage for designers who care as much about the sound floor as about the pressure curve.

Product Specification

The FB3G250-310PL-95 is a backward-curved centrifugal fan built around a 250 mm diameter impeller molded from glass-fiber reinforced propylene. The backward-curved blade form is chosen for its stable pressure characteristic and its ability to operate across a wide flow range without the steep stall behavior of forward-curved designs. Glass-fiber loading raises the stiffness of each blade, so the impeller holds its shape at 2500 RPM while keeping mass and inertia low, which in turn reduces start-up torque and bearing load. The impeller is mounted in a die-cast aluminum housing and endcap; aluminum was selected over steel for its dimensional stability, corrosion resistance and its ability to conduct heat away from the motor compartment. The complete rotating group is balanced before assembly to keep vibration and structure-borne noise low. The motor is the BLDCDC92, a 92 mm rotor brushless DC machine with electronic commutation. It operates from a 310VDC nominal supply and tolerates 254 to 374VDC, a range that covers the normal sag and ripple of a rectified high-voltage DC bus, so no separate regulator is needed in most designs. At the rated point the fan draws 0.38 A and consumes 118 W, producing a maximum static pressure of 2.22 in.wg (555 Pa). Speed control is via the motor's DC control interface, giving smooth turndown from 2500 RPM to standstill; the input is isolated and filtered against conducted noise so that long control leads in a cabinet do not pick up interference. Electrical protection includes locked-rotor and over-current limiting, and the winding is Class B insulated with thermal protection embedded in the stator. The motor is permanently lubricated with a sealed bearing system selected for continuous duty; under nominal conditions the bearing life comfortably exceeds the service interval of most air-handling equipment, and the low 62.3 dB(A) sound level reflects both the balanced rotor and the low bearing preload. The electrical interface is a 20AWG lead, 118 mm long, with the standard FANOVA color code for supply, ground and control; the lead exits through a strain-relieved grommet in the endcap. The die-cast housing includes mounting bosses on a standard bolt pattern for drop-in replacement of comparable 250 mm centrifugal stages. All units are hipot tested, run-in and acoustically sampled before packing. FANOVA manufactures under ISO 9001 and can supply CE and RoHS declarations; the fan is suited to medical equipment, laboratory ventilation, instrument cooling and other applications where a quiet, high-pressure DC centrifugal stage is required.

Nominal Date
DC Backward Curved Centrifugal Fan image.png
Type FB3G250-310PL-95
Model BLDCDC92

 

Nominal Voltage VDC 310
Voltage range VDC 254~374
Current draw A 0.38±10%
Speed(RPM) min-1  2500±5%
Power consumption W 118±10%
Sound Pressure Level dB(A) 62.3±5%
Max. Air Flow CFM / m3 /H 1288.8/2190
Max. Static Pressure In.wg /Pa 2.22/555
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G250-310PL-95 delivers 2190 m3/h at 555 Pa while drawing only 118W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 250mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 250mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000