Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G280-2AAL-30 EC Backward Curved Centrifugal Fan 280mm 230V 4650 m3/h

FB3G280-2AAL-30

Nominal Voltage VAC 230
Current draw A 4.8±10%
Speed(RPM) min-1  3500±5%
Power consumption W 1100±10%
Max. Air Flow CFM / m3 /H 2736.6/4650.2
Max. Static Pressure In.wg /Pa 5.4/1350

50pcs

Brand:
FANOVA
Spu:
FB3G280-2AAL-30
  • Overview
  • Recommended Products
Brief Description

When a single 280 mm backward curved impeller is asked to do the work of a whole bank of smaller fans, the FB3G280-2AAL-30 answers with 4650.2 m3H of free delivery and a 1350 Pa static pressure ceiling that keeps ducted systems breathing even behind dense filter banks. This 230VAC electronically commutated model runs from 184 to 270 V, draws 4.8 A at 3500 RPM, and delivers 1100 W of shaft power, so one die-cast aluminum rotor replaces multiple AC belt-driven units and their maintenance points. The BLDCEC137 motor is a brushless DC design with integrated electronics, giving stepless 0-10 V or PWM speed trimming instead of tapped windings, and the wide-voltage input means the same fan ships to markets with unstable grids without a step transformer. Because the impeller and endcap are both die-cast aluminum, the assembly resists corrosion and holds balance at 3500 RPM far better than plastic rotors of the same diameter. Insulation is Class F with a built-in thermal cutoff, the motor is protected to IP54, and the sealed ball bearings are rated for 40,000 hours at 40 degrees C ambient, keeping service intervals long in continuous duty. Typical installations include cleanroom HEPA return walls, AHU plug fans, telecom shelter cooling, lithium battery room exhaust, and industrial dust-collection headers where high pressure drop is normal. The fan carries CE and RoHS marking and is manufactured under ISO 9001 with 100 percent run-in testing before shipment. For engineers replacing a multi-fan array with one high-pressure, high-flow EC impeller, the FB3G280-2AAL-30 is the consolidation point.

Product Specification

The FB3G280-2AAL-30 is built around a 280 mm diameter backward curved centrifugal impeller die-cast in aluminum alloy, with 11 swept blades locked into a machined hub and a tolerance-controlled tip clearance that suppresses recirculation losses at the duty point. Blade geometry is optimized for a rising pressure curve, so the fan holds 1350 Pa maximum static pressure while still moving 4650.2 m3H at free air, and the aluminum construction keeps the rotor light enough for fast acceleration yet stiff enough to avoid resonance through the 3500 RPM operating band. The impeller is dynamically balanced to ISO 1940 G6.3 and mounted directly on the motor shaft, eliminating belt losses and the alignment drift that affects belt-driven alternatives. The mating inlet cone and endcap are also die-cast aluminum, forming a rigid scroll that damps vibration and meets the corrosion resistance expected in humid plant rooms and coastal installations. Drive comes from a BLDCEC137 brushless DC motor with a 137 mm rotor diameter and integrated commutation electronics; the 230VAC nominal input accepts 184 to 270 V, rectifies internally, and produces 1100 W at 4.8 A with power factor correction above 0.95, so the fan behaves like a resistive load on the building supply. Speed is controlled steplessly through a 0-10 VDC analog input, a PWM input, or an onboard potentiometer, with tachometer output and alarm relay contacts available on the control harness for BMS integration; the EC electronics also provide soft start, overcurrent limiting and locked-rotor shutdown. Electrical connection is made through a 1000 mm 18AWG cable with factory-sealed strain relief, and the motor winding is Class F insulated with a thermal protector embedded in the stator, while the electronics enclosure is rated IP54 against dust and splash. Rotor support uses pre-lubricated double-shielded ball bearings selected for 40,000 hours L10 life at 40 degrees C ambient, mounted in a die-cast bearing bridge that keeps shaft runout under 0.05 mm; the fan may be installed in any orientation and is supplied with a mounting flange drilled to standard 280 mm pattern dimensions. Acoustic output is 88 dB(A) at maximum speed, reducible by voltage or PWM turndown without inverter whine. Each unit is hipot tested, run-in for two hours, and checked for vibration signature before packing, and production is governed by ISO 9001 with CE and RoHS compliance documentation available on request.

Nominal Date
AC Backward Curved Centrifugal Fan image.png
Type FB3G280-2AAL-30
Model BLDCEC137

 

Nominal Voltage VAC 230
Voltage range VAC 184~270
Current draw A 4.8±10%
Speed(RPM) min-1  3500±5%
Power consumption W 1100±10%
Sound Pressure Level dB(A) 88±5%
Max. Air Flow CFM / m3 /H 2736.6/4650.2
Max. Static Pressure In.wg /Pa 5.4/1350
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G280-2AAL-30 delivers 4650.2 m3/h at 1350 Pa while drawing only 1100W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 280mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 280mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000