Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G220-12PL-93 DC Backward Curved Centrifugal Fan 220mm 12V 812 m3/h

FB3G220-12PL-93

Nominal Voltage VDC 12
Current draw A 3.75±10%
Speed(RPM) min-1  2300±5%
Power consumption W 45±10%
Max. Air Flow CFM / m3 /H 477.9/812
Max. Static Pressure In.wg /Pa 1.34/334

50pcs

Brand:
FANOVA
Spu:
FB3G220-12PL-93
  • Overview
  • Recommended Products
Brief Description

When a 220 mm backward-curved impeller delivers 812 m3/h at only 64 dB(A), the design team has achieved something rare: airflow you can hold a conversation next to. The FB3G220-12PL-93 is a 12VDC centrifugal fan built for exactly that brief, pairing a whisper-quiet 64 dB(A) acoustic signature with an ultra-low 45 W power draw. Its secret is a glass-fiber reinforced propylene impeller spinning at 2300 RPM inside a die-cast aluminum housing, a combination that keeps rotating mass low, blade noise soft and efficiency high. The BLDCDC92 brushless DC motor runs from a 12VDC nominal supply (9 VDC minimum) and pulls 3.75 A, making the fan equally at home on battery banks, solar-charged DC buses and compact power supplies. Control is simple and flexible: a 0-10 VDC / PWM speed interface lets the host system trim the fan between standby and full 2300 RPM without extra hardware. Electrical protection and Class B insulation are standard, and the dual ball-bearing system is rated for 70,000 hours at 40 C, so the fan outlives most of the equipment it cools. Typical applications include medical and laboratory enclosures, office ventilation, air purifiers, telecom cabinets, and any design where noise and current draw matter as much as airflow. The unit carries CE and RoHS certification and ships with a 500 mm, 20AWG lead for direct integration.

Product Specification

The FB3G220-12PL-93 is a backward-curved centrifugal fan from FANOVA's FB3G series, engineered around a 220 mm diameter impeller molded from glass-fiber reinforced propylene. The impeller's backward-curved blade geometry, with a carefully tuned blade count and exit angle, converts rotational speed into pressure without the turbulence signature of forward-curved designs; the glass-fiber loading raises stiffness and dimensional stability so the blade profile stays true across the full 2300 RPM range. The impeller is mounted on a 92 mm rotor and balanced dynamically before assembly, keeping vibration low and contributing to the fan's 64 dB(A) sound pressure level. The impeller runs inside a die-cast aluminum endcap and housing, which provides rigid motor alignment, effective heat dissipation for the drive electronics and a robust mounting interface for OEM chassis. At the heart of the unit is the BLDCDC92 brushless DC motor, a three-phase electronically commutated design with integrated Hall sensing and a sinusoidal drive stage that smooths torque ripple and further suppresses acoustic noise. The motor is rated at 12VDC nominal (9 VDC minimum) and draws 3.75 A, producing 45 W of input power and delivering a maximum free-air flow of 812 m3/h (477.9 CFM) and a maximum static pressure of 334 Pa (1.34 in.wg). Speed control is implemented through a 0-10 VDC or PWM input, allowing stepless adjustment from standstill to 2300 RPM and enabling the host system to trade airflow for acoustic output or battery life. Electrical protection includes locked-rotor and over-current shutdown, reverse-polarity tolerance and soft-start current limiting to protect upstream DC supplies. The motor windings use Class B insulation and the assembly is designed for continuous duty at ambient temperatures up to 40 C. The shaft runs in dual ball bearings pre-lubricated for life and rated at 70,000 hours L10 at 40 C, giving the fan a maintenance-free service life well beyond typical equipment refresh cycles. The electrical interface is a 500 mm, 20AWG multi-conductor cable with tinned ends, suitable for direct connection to terminal blocks or crimp connectors. The fan is RoHS compliant and CE marked, and each unit is production-tested for speed, current draw, airflow and noise before packing. With its low 45 W consumption, soft acoustics and plastic impeller's resistance to corrosion and chemical attack, the FB3G220-12PL-93 suits medical and laboratory equipment, office and residential ventilation, air purification, telecom and IT cooling, and solar or battery-powered systems where every watt and every decibel counts.

Nominal Date
DC Backward Curved Centrifugal Fan image.png
Type FB3G220-12PL-93
Model BLDCDC92

 

Nominal Voltage VDC 12
Voltage range VDC 9
Current draw A 3.75±10%
Speed(RPM) min-1  2300±5%
Power consumption W 45±10%
Sound Pressure Level dB(A) 64±5%
Max. Air Flow CFM / m3 /H 477.9/812
Max. Static Pressure In.wg /Pa 1.34/334
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G220-12PL-93 delivers 812 m3/h at 334 Pa while drawing only 45W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 220mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 220mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000