Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FB3G133-12PL-726 DC Backward Curved Centrifugal Fan 133mm 12V 457 m3/h

FB3G133-12PL-726

Nominal Voltage VDC 12
Current draw A 2.4±10%
Speed(RPM) min-1  3900±5%
Power consumption W 28±10%
Max. Air Flow CFM / m3 /H 268.7/456.6
Max. Static Pressure In.wg /Pa 1.52/380

50pcs

Brand:
FANOVA
Spu:
FB3G133-12PL-726
  • Overview
  • Recommended Products
Brief Description

Whisper-quiet operation below 65 dB(A) makes the FB3G133-12PL-726 the ideal air mover for noise-sensitive medical, laboratory and office equipment. By pairing a lightweight glass-fiber reinforced polypropylene impeller with an electronically commutated BLDCDC72 motor, this 133 mm backward curved centrifugal fan delivers 268.7 CFM (456.6 m3/h) and 1.52 In.wg (380 Pa) while drawing only 28 W at 12 VDC. The ultra-low power draw supports battery-backed and solar-powered ventilation systems where every watt matters. Speed is precisely controlled from 0 to 3900 RPM via a 0-10 VDC or PWM interface, allowing seamless integration with smart building controllers. Class F insulation and reverse-polarity protection safeguard the fan in demanding electrical environments, while the 20AWG 500 mm cable simplifies drop-in replacement. Long-life ball bearings rated for 70,000 hours at 40°C minimize maintenance in continuous-duty applications. Typical uses include HEPA filtration units, medical ventilators, lab fume hoods, telecom cabinets and compact air handling units. The fan carries CE, RoHS and UL component recognition for global deployment.

Product Specification

The FB3G133-12PL-726 is a 133 mm diameter backward curved centrifugal fan built around a glass-fiber reinforced polypropylene impeller. This seven-blade impeller is injection-molded as a single piece for dynamic balance and chemical resistance, and its backward-curved geometry produces a steep pressure characteristic that resists system-effect losses in compact ducting. The impeller is mounted directly on the rotor of a BLDCDC72 brushless DC external-rotor motor, eliminating belt or coupling losses and enabling speeds up to 3900 RPM. At nominal 12 VDC (operating range 9-13.2 VDC), the motor draws 2.4 A and consumes 28 W, generating a maximum airflow of 456.6 m3/h (268.7 CFM) and a maximum static pressure of 380 Pa (1.52 In.wg). Speed control is achieved through a 0-10 VDC analog input or a 25 kHz PWM signal, with tachometer output and locked-rotor alarm available for system diagnostics. The die-cast aluminum housing, finished with electrophoretic coating, provides corrosion resistance and mechanical rigidity while acting as a heat sink for the integrated drive electronics. Electrical connection is made via a 500 mm 20AWG cable, and the motor is protected against reverse polarity, over-current and over-temperature. Class F insulation (155°C) and a maximum ambient operating temperature of 60°C ensure reliability in enclosed equipment. The dual ball-bearing system is rated for 70,000 hours L10 life at 40°C, and the fan is balanced to ISO 1940 G6.3 for low vibration. The unit is certified to CE, RoHS and UL 1004-1 component standards, and each fan is factory-tested for hi-pot, insulation resistance and performance before shipment.

Nominal Date
DC Backward Curved Centrifugal Fan image.png
Type FB3G133-12PL-726
Model BLDCDC72

 

Nominal Voltage VDC 12
Voltage range VDC 9
Current draw A 2.4±10%
Speed(RPM) min-1  3900±5%
Power consumption W 28±10%
Sound Pressure Level dB(A) 63±5%
Max. Air Flow CFM / m3 /H 268.7/456.6
Max. Static Pressure In.wg /Pa 1.52/380
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FB3G133-12PL-726 delivers 456.6 m3/h at 380 Pa while drawing only 28W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 133mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 133mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000