FB3G280-4APK-60
| Nominal Voltage | VAC | 380 |
| Current draw | A | 1.1±10% |
| Speed(RPM) | min-1 | 3050±5% |
| Power consumption | W | 700±10% |
| Max. Air Flow | CFM / m3 /H | 2281.03/3876 |
| Max. Static Pressure | In.wg /Pa | 4.16/1040 |
50pcs
When a single fan has to move serious volumes of air against a genuinely high pressure differential, the FB3G280-4APK-60 is the model that earns its place. It pairs a 280 mm glass-fiber reinforced propylene impeller with a 102 mm BLDCEC102 electronically commutated rotor to deliver a maximum airflow of 3876 m3/h (2281 CFM) and a maximum static pressure of 1040 Pa (4.16 in.wg) at 3050 RPM, drawing 700 W at 1.1 A from a 380VAC three-phase supply that tolerates a range down to 304V. The combination of large-diameter impeller, backward-curved blade geometry and EC motor technology means one FB3G280-4APK-60 can replace several smaller AC fans while cutting installed power and wiring complexity. Speed is set through a 0-10V DC or PWM control interface, so airflow can be trimmed precisely to the duty point instead of being fixed by the mains frequency. The motor is Class F insulated with automatic electronic protection against over-current, over-voltage, locked rotor and over-temperature, and the sealed ball bearings are rated for a long L10 life at continuous duty. Typical installations include industrial ventilation, HVAC air handling units, cleanroom and HEPA filtration banks, drying and process air systems, and new-energy equipment cabinets where high pressure at high flow is the deciding requirement. The unit is CE and RoHS compliant and is manufactured under the FANOVA quality system in Suzhou, China.
The FB3G280-4APK-60 is a backward-curved centrifugal fan built around a 280 mm diameter impeller molded from propylene reinforced with glass fiber. The impeller carries a backward-curved blade profile that produces a steep pressure-flow characteristic, which is why the fan can hold 1040 Pa of static pressure while still delivering up to 3876 m3/h of free air. The glass-fiber reinforcement raises blade stiffness so the impeller keeps its shape and balance at the 3050 RPM design speed, and the material is inherently resistant to moisture and many chemical vapors, making it suitable for humid or mildly corrosive airstreams without the weight penalty of a steel rotor. The impeller is mounted in a die-cast aluminum endcap and housing that provides a rigid, dimensionally stable frame, conducts heat away from the motor, and keeps vibration low across the full speed range. The rotor is 102 mm in diameter and forms part of the BLDCEC102 motor, an electronically commutated brushless DC design with permanent magnets and integrated power electronics. Because the electronics synthesize the commutation waveform, the motor reaches high efficiency with low slip losses and delivers its 700 W rating at 1.1 A on a 380VAC three-phase supply; the drive is specified for a voltage range extending down to 304V, so it rides through the supply sags common on industrial distribution networks. Speed control is through a 0-10V analog input or a PWM signal, giving continuous modulation from standstill to 3050 RPM and allowing the fan to be integrated into a building management system, a DCIM or a PLC-based process controller. The electronics also provide soft start, which limits inrush current, and automatic protection against over-current, over-voltage, under-voltage, locked rotor and over-temperature; the motor winding is Class F insulated for a 155 C temperature rating. The shaft runs in sealed, pre-lubricated ball bearings selected for continuous duty, with a long L10 rating that supports years of maintenance-free operation in air handling equipment. Electrical connection is made through an 18AWG cable with a 208 mm lead length, which is long enough for a clean junction inside a control box or terminal enclosure. The fan is designed for horizontal or vertical mounting, and its backward-curved characteristic makes it well suited to ducted systems with long runs, dense HEPA or bag filter banks, and multi-outlet plenums where system resistance is high. Typical applications include industrial ventilation, HVAC air handling units, cleanroom recirculation and filtration, process drying, and cooling or exhaust in new-energy and power-electronics enclosures. Each unit is inspected for balance, dielectric strength, current draw and speed accuracy before shipment, and the product carries CE and RoHS compliance under the FANOVA manufacturing and quality management system.
| AC Backward Curved Centrifugal Fan | ![]() |
|
| Type | FB3G280-4APK-60 | |
| Model | BLDCEC102 | |
| Nominal Voltage | VAC | 380 |
| Voltage range | VAC | 304 |
| Current draw | A | 1.1±10% |
| Speed(RPM) | min-1 | 3050±5% |
| Power consumption | W | 700±10% |
| Sound Pressure Level | dB(A) | 80.6±5% |
| Max. Air Flow | CFM / m3 /H | 2281.03/3876 |
| Max. Static Pressure | In.wg /Pa | 4.16/1040 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FB3G280-4APK-60 delivers 3876 m3/h at 1040 Pa while drawing only 700W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 280mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 280mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.