Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

FD3G146-310PV-90 DC Dual Inlet Centrifugal Blower 146mm 310V 1211 m3/h

FD3G146-310PV-90

Nominal Voltage VDC 310
Current draw A 0.65±10%
Speed(RPM) min-1  2050±5%
Power consumption W 201.5±10%
Max. Air Flow CFM / m3 /H 712.6/1210.9
Max. Static Pressure In.wg /Pa 2.4/600

50pcs

Brand:
FANOVA
Spu:
FD3G146-310PV-90
  • Overview
  • Recommended Products
Brief Description

When a dual inlet centrifugal blower must survive continuous heavy-duty service, the FD3G146-310PV-90 answers with a 201.5 W mechanically commutated DC drive and a galvanized steel impeller that simply outlasts plastic alternatives. This 310 VDC model (operating range 248 to 372 VDC) delivers up to 1210.9 m3/h (712.6 CFM) of airflow and 600 Pa (2.4 in.wg) of static pressure at 2050 RPM, using a 146 mm diameter impeller with a 92 mm rotor and a BLDCDC92 motor. Speed is controlled through a 0-10 VDC interface, allowing precise modulation from 10 to 100 percent without external inverters. The motor is protected against locked rotor, over-current and over-temperature, and the unit is rated for Class F insulation with IP54 protection on the motor housing. Dual ball bearings rated L10 at 70,000 hours at 40 degrees C ensure long service intervals, while the 20AWG, 500 mm cable simplifies field wiring. Typical applications include industrial air handling units, fume extraction, drying ovens, telecom cabinet cooling and process ventilation where dust, heat and continuous operation are routine. The blower is CE and RoHS compliant and is manufactured under ISO 9001 quality management.

Product Specification

The FD3G146-310PV-90 is a dual inlet centrifugal blower built around a 146 mm diameter impeller fabricated from galvanized steel sheet. The impeller features 36 forward-curved blades, each rolled and riveted to the back plate and front shroud, a construction that resists deformation under the centrifugal loads developed at 2050 RPM and tolerates the higher temperatures that would soften thermoplastic impellers. The galvanized zinc coating provides sacrificial corrosion protection in humid or mildly aggressive air streams, making the blower suitable for exhaust duty in industrial environments. The impeller is dynamically balanced to ISO 1940 G6.3 after assembly, keeping vibration below 2.8 mm/s RMS across the speed range. The die-cast aluminum end cap and housing enclose the motor and provide rigid support for the bearing seats, while the dual inlet scroll casing is designed to deliver a stable pressure curve from free delivery to the maximum static pressure of 600 Pa. The motor is a BLDCDC92 mechanically commutated DC design with a 92 mm rotor, rated 310 VDC nominal (248 to 372 VDC range) at 0.65 A and 201.5 W output. Speed control is implemented through a 0-10 VDC analog input with 10 percent to 100 percent modulation, and the control electronics include soft-start, locked rotor protection, over-current limiting and over-temperature shutdown. Electrical connection is made through a 500 mm cable with 20AWG conductors, and the motor is insulated to Class F with a dielectric strength of 1500 VAC for one minute. The shaft runs in two pre-lubricated dual ball bearings with an L10 life of 70,000 hours at 40 degrees C ambient, and the bearing seats are machined to H7 tolerance to minimize radial play. The blower is designed for panel mounting with four M4 threaded inserts and can be installed in any orientation. Acoustic output is 69.6 dB(A) at maximum speed measured at one meter, and the unit is certified to CE and RoHS and produced under an ISO 9001 quality system with 100 percent end-of-line testing of airflow, static pressure and current draw.

Nominal Date
DC Dual Inlet Centrifugal Blower image.png
Type FD3G146-310PV-90
Model BLDCDC92

 

Nominal Voltage VDC 310
Voltage range VDC 248~372
Current draw A 0.65±10%
Speed(RPM) min-1  2050±5%
Power consumption W 201.5±10%
Sound Pressure Level dB(A) 69.6±5%
Max. Air Flow CFM / m3 /H 712.6/1210.9
Max. Static Pressure In.wg /Pa 2.4/600
Insulation class ~ Class B
Degree of protection ~ IP44
Control Input ~ 0~10VDC / PWM
Signal Output ~ FG (Tach output )
Connection diagram
image.png

Remarks:

Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized

Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel

Product drawing
image.png
Aerodynamic Performance Charts
image.png

Test condition:

Ⅰ.The test data is obtained under the specified environment conditions and installation mode

Ⅱ.Input Voltage---Operating voltage

Ⅲ.Temperature---Room temperature 25℃

Ⅴ.Humidity---65%RH

Safety Requirements

Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off

Ⅱ.Do not plug or unplug the fan lead plug when the fan is running

Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury

Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out

Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds

Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product

Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer

Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading

Advantages:

1. High Efficiency: The FD3G146-310PV-90 delivers 1210.9 m3/h at 600 Pa while drawing only 201.5W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.

2. Industrial-Grade Impeller: The 146mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.

3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).

4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.

5. Easy Installation and Maintenance: Compact 146mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.

FAQ

Q1:What kind of payments do you support?

A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping

Q2.Will you provide samples?

A2: Sample is available and can be delivered within 10days

Q3:How can I choose a more suitable model?

A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.

Q4:How can I place the order?

A4:  Usually quote you within 24 hours  after  we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q5:About transportation

A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive. 

Q6:How long is the warranty period?

A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000