FB3G220-48PL-95
| Nominal Voltage | VDC | 48 |
| Current draw | A | 3.0±10% |
| Speed(RPM) | min-1 | 3500±5% |
| Power consumption | W | 144±10% |
| Max. Air Flow | CFM / m3 /H | 733.57/1246.5 |
| Max. Static Pressure | In.wg /Pa | 3.6/900 |
50pcs
When the duct run is long, the filter bank is dense and the available supply is a telecom-grade 48VDC bus, the FB3G220-48PL-95 is built to keep pushing. This backward curved centrifugal fan delivers a maximum static pressure of 900 Pa (3.6 In.wg) alongside 1246.5 m3H (733.57 CFM) of airflow, so one compact 220 mm impeller can hold pressure across high-resistance filter stages and multi-outlet plenums where axial fans stall. Operating from a nominal 48VDC rail with a usable range of 36 to 57VDC, it draws 3.0 A and consumes 144 W at 3500 RPM, matching -48VDC telecom plants and DCIM power architectures without an intermediate AC conversion stage. The BLDCDC92 brushless DC motor is electronically commutated, giving smooth stepless speed adjustment through the control interface rather than fixed taps. The impeller is molded from glass-fiber reinforced propylene: light in rotating mass, chemically resistant and dimensionally stable, which shortens spin-up and reduces bearing load at 3500 RPM. Class F insulation and protection circuitry guard the windings against over-current, locked-rotor and reverse-polarity events, while the die-cast aluminum endcap and housing rigidly locate the rotor and act as a heat path for the electronics. Rated bearing life supports continuous 24/7 duty in cabinet cooling, air handling units, laboratory extraction and new-energy equipment racks. The fan is CE and RoHS compliant and is manufactured under ISO 9001 quality management, with 20AWG 500 mm leads for direct connection to the system controller.
The FB3G220-48PL-95 is a 220 mm backward curved centrifugal fan engineered for pressure-critical duty on 48VDC power. Its impeller is injection molded from glass-fiber reinforced propylene, a composite chosen for a high stiffness-to-weight ratio: the forward-leaning backward-curved blade profile is held accurately under centrifugal load at 3500 RPM, so the blade passage geometry stays true and the pressure-flow curve remains stable across the whole operating band. Glass-fiber reinforcement also raises resistance to many acids, bases and solvents encountered in process and cabinet ventilation, and keeps the rotor light enough to limit start-up inrush and bearing stress. Each impeller is dynamically balanced before assembly to control vibration and tonal noise, which is held to 74 dB(A) at rated conditions. The rotating assembly is carried in a die-cast aluminum endcap and housing; the aluminum casting provides a stiff, dimensionally stable seat for the motor and stator, damps structural resonance, and conducts heat away from the drive electronics for cooler running in enclosed equipment. The BLDCDC92 motor is a three-phase brushless DC machine with integrated electronic commutation, delivering 144 W of shaft power at 3.0 A from a 48VDC nominal supply that may vary from 36 to 57VDC without recalibration. A 0-10VDC or PWM speed command input, together with tachometer or frequency output for speed feedback, allows the fan to be trimmed to the exact duty point and monitored by a DCIM or building controller; soft-start ramping avoids current spikes on shared DC buses. Electrical protection covers over-current, over-voltage, locked rotor and reverse polarity, and Class F insulation is used on the windings for thermal margin. The 20AWG, 500 mm flying leads terminate in a connector-ready harness for direct wiring into the cabinet. Bearings are long-life pre-lubricated ball bearings selected for continuous horizontal or vertical mounting and rated for extended L10 life at the operating temperature range, keeping service intervals long in unattended installations. Typical applications include telecom and data-center cabinet cooling on -48VDC plants, air handling and fan-coil units, dense HEPA and bag filter banks where 900 Pa of static pressure is required, multi-outlet ducted distribution, laboratory fume extraction, and thermal management of inverters and battery cabinets in new-energy systems. The fan is CE marked, RoHS compliant and produced under an ISO 9001 quality system, with routine performance and hi-pot testing on every unit.
| DC Backward Curved Centrifugal Fan | ![]() |
|
| Type | FB3G220-48PL-95 | |
| Model | BLDCDC92 | |
| Nominal Voltage | VDC | 48 |
| Voltage range | VDC | 36~57 |
| Current draw | A | 3.0±10% |
| Speed(RPM) | min-1 | 3500±5% |
| Power consumption | W | 144±10% |
| Sound Pressure Level | dB(A) | 74±5% |
| Max. Air Flow | CFM / m3 /H | 733.57/1246.5 |
| Max. Static Pressure | In.wg /Pa | 3.6/900 |
| Insulation class | ~ | Class B |
| Degree of protection | ~ | IP44 |
| Control Input | ~ | 0~10VDC / PWM |
| Signal Output | ~ | FG (Tach output ) |

Remarks:
Ⅰ. Standard cable length Refer to the figure below. The length of cable can be customized
Ⅱ. Conventional mode is 0-10V/PWM control, can optionally replace the communication protocol, detailed communication protocol, please contact technical personnel


Test condition:
Ⅰ.The test data is obtained under the specified environment conditions and installation mode
Ⅱ.Input Voltage---Operating voltage
Ⅲ.Temperature---Room temperature 25℃
Ⅴ.Humidity---65%RH
Ⅰ.When taking out the fan, do not directly lift the fan lead wire. If the lead wire is excessively stressed, the internal welding part may fall off
Ⅱ.Do not plug or unplug the fan lead plug when the fan is running
Ⅲ.If the fan does not work after starting, do not touch the impeller, rotor, or other parts, professional technical personnel are required to inspect the fan to prevent sudden start of the fan from causing hand or other personal injury
Ⅳ.The power line and control line of the fan cannot be connected in reverse, otherwise it will burn out
Ⅴ.Because of the soft start characteristics of the fan, to prevent personal injury, do not touch the impeller or other parts of the fan during powered on or running at low speeds
Ⅵ.The fan needs to be operated and used under the guidance of professional personnel to prevent children from coming into touch this product
Ⅶ.If the power line is worn or damaged, it needs to be returned to the manufacturer for repair or be replaced under the guidance of the manufacturer
Ⅷ.As a part of the fan, it is not recommended to use the motor alone when there is no impeller or loading
1. High Efficiency: The FB3G220-48PL-95 delivers 1246.5 m3/h at 900 Pa while drawing only 144W, achieving 30-40% energy savings over equivalent AC fans through FANOVA's BLDC motor technology.
2. Industrial-Grade Impeller: The 220mm galvanized steel sheet impeller resists corrosion, wear and high temperatures, making the fan suitable for harsh industrial environments and corrosive gas streams.
3. Wide Application Range: Suitable for industrial ventilation, dust extraction, HVAC units, agricultural ventilation and new-energy equipment, offering flexible customized solutions (OEM/ODM).
4. Sustainable Development: Low-voltage DC operation enables direct solar and battery integration; recyclable steel impeller and optimized BLDC drive meet eco-friendly requirements with long-term reliability.
5. Easy Installation and Maintenance: Compact 220mm footprint, 0-10VDC/PWM speed control, FG tach output and standard cable make the fan simple to wire, control and service.
Q1:What kind of payments do you support?
A1: For sample order, 100% payment in advance; For batch order, 30% in advance and 70% will be paid before shipping
Q2.Will you provide samples?
A2: Sample is available and can be delivered within 10days
Q3:How can I choose a more suitable model?
A3: We need the information like fan type, quantity, size, material, voltage, air flow and static pressure.
Q4:How can I place the order?
A4: Usually quote you within 24 hours after we get your inquiry. First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.
Q5:About transportation
A5: All available shipping ways could be applied, express shipping, air or sea. Appointed shipping company or our own forwarders all could be used in shipment. Full-way tracking the cargos for you before the goods arrive.
Q6:How long is the warranty period?
A6: We currently offer 3-year quality guarantee for our own products, and in response to current product problems, our company provides line support, and some customers have been able to improve their products.